Pennock's Fiero Forum
  The Construction Zone
  whodeanie's 88 gt custom build (Page 1)

Post New Topic  Post A Reply
Email This Page to Someone! | Printable Version

This topic is 20 pages long:  1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20 
Previous Page | Next Page
next newest topic | next oldest topic
whodeanie's 88 gt custom build by whodeanie
Started on: 03-20-2008 12:26 PM
Replies: 788 (67461 views)
Last post by: CommanderKeen on 08-23-2013 07:59 PM
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post03-20-2008 12:26 PM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
I guess this is as good a time as any to start posting my build project and let everyone know where it started form.
In November 2007 I got this 88GT and it looked nice but needed work.
some things I have done so far.
new poly motor and trans mounts ( they were all Broke in two !)
new poly suspension front and rear.
fixed all of the v6 and auto trans. leaks (nothing bugs me more than oil in my shop)
did the s-10 booster upgrade and started on the body.
I am making a one off fiberglass body for the whole car. I started with a 355 front facia taken from a real 355 and cut down 4" I made a top cover for it using the stock GT bumper as a mold then made molds off the stock front fenders so I could make them wider to fit the new front end and cover the front tires better.
I also vented the hood.
this is where it is at this point. I talked to Archie and I am going to order his wide body rockers.
also as far as the drivetrain and other mods f40 6 speed trans, LS6 motor , choptop among other mods I will post all of it here.
This images is larger than 153600 bytes. Click to view.



IP: Logged
PFF
System Bot
Saxman
Member
Posts: 5151
From: Melbourne, FL
Registered: May 2005


Feedback score:    (8)
Leave feedback





Total ratings: 114
Rate this member

Report this Post03-20-2008 08:08 PM Click Here to See the Profile for SaxmanClick Here to visit Saxman's HomePageSend a Private Message to SaxmanEdit/Delete MessageReply w/QuoteDirect Link to This Post
It already looks nice! Those improvements will make it the exception.

Keep us informed of how things go. I'd like to see how the body kit goes.
IP: Logged
SATX
Member
Posts: 63
From: Joppa, MD, USA
Registered: Mar 2005


Feedback score: N/A
Leave feedback

Rate this member

Report this Post03-21-2008 11:31 AM Click Here to See the Profile for SATXSend a Private Message to SATXEdit/Delete MessageReply w/QuoteDirect Link to This Post
I like the Street Name in your last pic.
IP: Logged
BMTFIERO
Member
Posts: 1187
From: Beaumont, TX
Registered: Dec 2007


Feedback score:    (18)
Leave feedback

Rate this member

Report this Post03-21-2008 12:14 PM Click Here to See the Profile for BMTFIEROSend a Private Message to BMTFIEROEdit/Delete MessageReply w/QuoteDirect Link to This Post
I know that I am looking foeward to it!!!!
IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post03-24-2008 09:56 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
I worked on the car this weekend and got the frontend mounted and glassed I was also able to work on the front fenders also.
I wanted to take pictures and post them today but my POS camera quit working so today it is off to walley world to get a new one and get
pictures to post tomarow.
as far as the street sign my sister-in-law works at a sign company. That was my x-mas gift. Can you tell she likes me ?
IP: Logged
Hudini
Member
Posts: 9029
From: Tennessee
Registered: Feb 2006


Feedback score: N/A
Leave feedback





Total ratings: 165
Rate this member

Report this Post03-24-2008 11:39 AM Click Here to See the Profile for HudiniSend a Private Message to HudiniEdit/Delete MessageReply w/QuoteDirect Link to This Post
I like that front end. Yellowstone has one in Germany and it looks very nice.

IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-09-2008 09:08 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
Bump to keep my build going
I have not worked on my car for some time now because of my back but I am now restarting on it
I will post new pictures after this weekend
the front end is mounted and I vented the hood and made new wide fiberglass front fenders
I made the front end 3"s wider than stock to get rid of that wedge look and cover the tires better.
I hope to have it in primer soon.
I have alot more to do to it.
IE.... widebody, choptop, custom rear facia, LS6/6 speed, and more
IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-11-2008 10:54 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
ok I will post pictures next monday but I wanted to give you an update.
I just ordered Archie's widebody kit and choptop windows
I also ordered the same rear bumper as carlo
along with the euro pop up head lights.
this stuf will take a little while to get here but I have much more work to be done before this stuff gets here.
IP: Logged
exoticse
Member
Posts: 8654
From: Orlando, Fl
Registered: Jun 2003


Feedback score: N/A
Leave feedback





Total ratings: 108
Rate this member

Report this Post07-11-2008 01:50 PM Click Here to See the Profile for exoticseSend a Private Message to exoticseEdit/Delete MessageReply w/QuoteDirect Link to This Post


Awesome !

Can't wait to see this project come together !!
IP: Logged
madcurl
Member
Posts: 21401
From: In a Van down by the Kern River
Registered: Jul 2003


Feedback score: N/A
Leave feedback





Total ratings: 314
Rate this member

Report this Post07-11-2008 02:49 PM Click Here to See the Profile for madcurlSend a Private Message to madcurlEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by whodeanie:

widebody, choptop, custom rear facia, LS6/6 speed, and more


Hey, somebody said, " widebody." My ears are now all pointee, hehe.
------------------




"My friends don't drive stock Fieros"

[This message has been edited by madcurl (edited 07-11-2008).]

IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-14-2008 11:17 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by madcurl:


Hey, somebody said, " widebody." My ears are now all pointee, hehe.

Widebody choptop to be exact!!!!!!!

IP: Logged
PFF
System Bot
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-14-2008 11:40 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post

whodeanie

3819 posts
Member since Jan 2008
Ok I spent all weekend working on my car. I got it striped, worked on the front end and the rear decklid.
I ordered the widebody kit from Archie this last week along with a set of choptop windows.
I also got a set of the German popup headlights and a rear facia like the one that carlo is working on.
but any way here are some pictures of what I did this weekend.
This images is larger than 153600 bytes. Click to view.
the frontend I used a 355 nose and cut 4" out of it to fit to the fiero I made fiberglass fenders and I made them
each 1-1/4" wider to cover the tires better.
This images is larger than 153600 bytes. Click to view.
the decklid I cut out the top and used the mustang hood scoop
This images is larger than 153600 bytes. Click to view.
the car striped and ready for the choptop and lambo doors.
This images is larger than 153600 bytes. Click to view.
another picture of the frontend work
This images is larger than 153600 bytes. Click to view.
and a picture of my extra 88 cradle for my LS6/F40 swap. that comes later!!!!
IP: Logged
madcurl
Member
Posts: 21401
From: In a Van down by the Kern River
Registered: Jul 2003


Feedback score: N/A
Leave feedback





Total ratings: 314
Rate this member

Report this Post07-14-2008 01:04 PM Click Here to See the Profile for madcurlSend a Private Message to madcurlEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by whodeanie:

Widebody choptop to be exact!!!!!!!


Wow! I look forward to viewing your thread. I think its time to click this thread as "favorites."
IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-14-2008 01:41 PM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
Thanks!
I will keep you all posted.
no new news yet still waiting on parts.

[This message has been edited by whodeanie (edited 07-17-2008).]

IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-18-2008 09:33 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
Minor update time!
I worked on the car last night and cut out the trunk and started to trim the front fenders
I ran out of sandpaper so I need to go get some today.
I have to work this weekend so if I can work on it at night I will.
I should have the headlights today and the body parts next week. I hope soon I leave for Germany on the 3rd for a week
after I get back it will be full ahead to get it done so I can drive it my truck uses too much fuel.
anyway here are some pics from last night.
This images is larger than 153600 bytes. Click to view.
no more trunk!!!!!!
This images is larger than 153600 bytes. Click to view.
a view from the back
This images is larger than 153600 bytes. Click to view.
the front fenders in progress still a lot of work to go
This images is larger than 153600 bytes. Click to view.
the front of the car, I would like to finish the glass work and get it in primer soon.
This images is larger than 153600 bytes. Click to view.
the rest of the car waiting on body parts and chop top
IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-18-2008 11:22 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post

whodeanie

3819 posts
Member since Jan 2008
look at what just showed up at my door!
I cant wait to install them.
Thanks Xanth.
This images is larger than 153600 bytes. Click to view.
I just talked to Archie and my widebody shiped out yesterday.
so next week the madness will begin! I have a sawsall and a plazma cutter and I am not affrad to use them!!!!!!!!!!!!!!
I will keep you all posted.

[This message has been edited by whodeanie (edited 07-18-2008).]

IP: Logged
SAFASTRO
Member
Posts: 604
From: Calgary, Alberta, Canada
Registered: Nov 2006


Feedback score:    (7)
Leave feedback

Rate this member

Report this Post07-18-2008 10:01 PM Click Here to See the Profile for SAFASTROClick Here to visit SAFASTRO's HomePageSend a Private Message to SAFASTROEdit/Delete MessageReply w/QuoteDirect Link to This Post
This should be cool......a chop top widebody with the 355 nose!!!
We'll be watching.

------------------
Order your Official Pennock's Forum decals in this thread. https://www.fiero.nl/forum/Forum4/HTML/040445.html



2" Choptop
Shortened Front Bumper
Shortened Rear Bumper
10" Stretch
Dubs
350 V8 Conversion pushing 350 ponies!!

IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-21-2008 09:54 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
ok here is the monday morning update.
this weekend I got the headlights installed and worked on the front end. I hate bodywork sanding stinks but it must be done
so I did some more fiberglass work and then worked on the front fenders and rear deck lid.
this week I got the widebody kit so I will post pic's when I get some of the parts on the car.
here are some pic's from this weekend. Enjoy!!!!!!!!
This images is larger than 153600 bytes. Click to view.
A closeup of the headlight
This images is larger than 153600 bytes. Click to view.
the frontend with the lights installed
This images is larger than 153600 bytes. Click to view.
the front fender bodywork
This images is larger than 153600 bytes. Click to view.
as the car is now but not for long!
This images is larger than 153600 bytes. Click to view.
the rear decklid scoop in progres

[This message has been edited by whodeanie (edited 07-21-2008).]

IP: Logged
Kyle1016
Member
Posts: 483
From: Berkeley
Registered: Apr 2006


Feedback score: (2)
Leave feedback

Rate this member

Report this Post07-21-2008 12:42 PM Click Here to See the Profile for Kyle1016Send a Private Message to Kyle1016Edit/Delete MessageReply w/QuoteDirect Link to This Post
awesome build man! Keep it up, I am loving the pictures
IP: Logged
exoticse
Member
Posts: 8654
From: Orlando, Fl
Registered: Jun 2003


Feedback score: N/A
Leave feedback





Total ratings: 108
Rate this member

Report this Post07-21-2008 06:27 PM Click Here to See the Profile for exoticseSend a Private Message to exoticseEdit/Delete MessageReply w/QuoteDirect Link to This Post


I see where you finally got your widebody kit !

Pictures, pictures !!
IP: Logged
Xanth
Member
Posts: 6886
From: Massachusetts
Registered: May 2006


Feedback score:    (18)
Leave feedback





Total ratings: 174
Rate this member

Report this Post07-21-2008 10:35 PM Click Here to See the Profile for XanthSend a Private Message to XanthEdit/Delete MessageReply w/QuoteDirect Link to This Post
Looking good

I had those lights sitting for about a year and you got them installed in a weekend

Did you already wire them up?
IP: Logged
PFF
System Bot
DeLorean00
Member
Posts: 4251
From: Sacramento, CA / Reno, NV
Registered: Aug 2005


Feedback score: (2)
Leave feedback





Total ratings: 100
Rate this member

Report this Post07-21-2008 11:15 PM Click Here to See the Profile for DeLorean00Send a Private Message to DeLorean00Edit/Delete MessageReply w/QuoteDirect Link to This Post
Man, I got to say you have balls. You took a car that looks the way I am trying to make mine look and cut it up like it was nothing. If I had your I would have said I'm done and drove it. But my hats off to you, keep it up!
IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-22-2008 09:39 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
I cant leave any thing alone! every car or motorcycle I have ever owned I have customized.
the headlights are installed but not wired yet I am waiting on the plugs and the fog lights to finish that part.
last night I worked on the doors and front fenders to get them ready for the widebody kit.
I am not going to put it on yet because I still have a lot of work to do before I can.
Archie is sending me the side windows for the choptop and once I get them I will start the cutting then I can do the rest of the body.
I just dont want to install the bodykit just to take it back off again.
but I will keep you all posted. no pic's of the car today just bodywork.
to show you what kind of work I do here are some of the other projects of mine a little off topic but enjoy!
This images is larger than 153600 bytes. Click to view.
I built this one from the ground up.

UPDATE! I just got the rear bumper today I will post pic's tomarow.
This images is larger than 153600 bytes. Click to view.
my 07 streetglide repainted

and last but not least my 06 nightrain with a 103 stroker and NOS hp is 168.
it has made the cover of US rider and I bedlinered it no paint.

[This message has been edited by whodeanie (edited 07-22-2008).]

IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-23-2008 08:04 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
Ok here are some pic's of the widebody and the rear bumper.
their is a lot of work to be done before I can put this stuff on the car.I need to finish the frontend and do the choptop first.
then I can start working on the body.last night I worked on the doors and the front fenders to patch all the holes from the GT moldings.
and I bonded the top of the fenders to the bottoms. body work does not photograph well. but I did place the rockers and the door part on the car so I
could get some pictures to post. they are black so they are hard to see in the pic's but here they are.....
This images is larger than 153600 bytes. Click to view.
This images is larger than 153600 bytes. Click to view.

This images is larger than 153600 bytes. Click to view.
IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-24-2008 08:32 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
ok it's thursday and last night more body work and fiberglass. it is slow.
fiberglass takes forever to set up so you cant do much else once you do that.
last night I worked on the nose cover to fit it to the wide front fenders.
I took a mold off the top of the gt facia to get the main shape then I cut it apart to fit it
and then glassed it to size now I have to wait for it to dry so I can take it off and glass the underside then
more sanding!
here are some pic's from last night.
This images is larger than 153600 bytes. Click to view.
This images is larger than 153600 bytes. Click to view.
This images is larger than 153600 bytes. Click to view.
IP: Logged
carnut122
Member
Posts: 9122
From: Waleska, GA, USA
Registered: Jan 2004


Feedback score:    (9)
Leave feedback





Total ratings: 83
Rate this member

Report this Post07-24-2008 09:35 AM Click Here to See the Profile for carnut122Send a Private Message to carnut122Edit/Delete MessageReply w/QuoteDirect Link to This Post
Wow, and I thought I had my car all torn apart! I cant wait to see the final product! Do you need some help with the Chop? I'm real curious about that one!
IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-24-2008 09:53 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by carnut122:

Wow, and I thought I had my car all torn apart! I cant wait to see the final product! Do you need some help with the Chop? I'm real curious about that one!

I may need some help. I have choped a Fiero before and it is not all that bad but I am doing this one a bit differant than the last one because I am using Archie's windows
and I am going to do this one like he does his so I can get his glass windows when he gets them.

IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-28-2008 12:49 PM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
New update!
I worked on the car friday night and startetd the widebody and worked on the frontend.
the passenger side of the car is on but still needs alot of work but I wanted to post the pic's in progress.
I do not know what color I am going to paint it yet.I don't know if I want it to stand out in a parking lot.
I was kind of thinking Charger Green but I dont know. what do you guys think?
anyway here are some new pic's. Enjoy!
This images is larger than 153600 bytes. Click to view.
This images is larger than 153600 bytes. Click to view.
This images is larger than 153600 bytes. Click to view.
This images is larger than 153600 bytes. Click to view.
This images is larger than 153600 bytes. Click to view.
IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-29-2008 01:15 PM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
Just a minor update. but I worked on the car a little last night on the front end and the drivers side body to fix the holes in the door from the GT rockers.
Fiberglass takes time to dry so I could not do much more with it at that point. so I will be working on it again tonight and I will try to get more pictures up tomarow.
at this point I have not started the chop yet, I talked to Archie and he is sending me the windows this week so I will not be able to chop it until I get back in 2 weeks.
I would like to have the car back together and in primer for the run for the hills in Sept. the motor and trans will not be done for some time. I am having a local corvette racing shop do some work to the LS6 and the trans they will not be done with it till Oct. or Nov. but it will be fast when I get it back.

If anyone has any questions on my build or I can help with yours let me know that is what we are all here for.
This images is larger than 153600 bytes. Click to view.
IP: Logged
madcurl
Member
Posts: 21401
From: In a Van down by the Kern River
Registered: Jul 2003


Feedback score: N/A
Leave feedback





Total ratings: 314
Rate this member

Report this Post07-30-2008 02:44 PM Click Here to See the Profile for madcurlSend a Private Message to madcurlEdit/Delete MessageReply w/QuoteDirect Link to This Post
Nice. Keep us tuned.

------------------




"Friends don't let friends drive stock"

IP: Logged
Xanth
Member
Posts: 6886
From: Massachusetts
Registered: May 2006


Feedback score:    (18)
Leave feedback





Total ratings: 174
Rate this member

Report this Post07-30-2008 04:26 PM Click Here to See the Profile for XanthSend a Private Message to XanthEdit/Delete MessageReply w/QuoteDirect Link to This Post
Looks good, I like how it has hips now
IP: Logged
PFF
System Bot
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-30-2008 04:51 PM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
Thanks Guy's
I will work on it a little this week but I will be out of the country next week. but when I get back I am going to bust butt to get it in primer and back on the road for
the run for the hills with the Ga. club in sept. then it will most likely be down intill the World of Wheels in Jan 09 but by then it will be Painted and it might have an
LS6/ 6 speed it depends on the corvette shop as to when they finish my motor. (it will have a few more HP than before! nudg,nudg,wink,wink)
can you say maby TURBO! or SC! not sure yet what they are doing to it yet but my friends own the shop and I trust them. I just know it will be very fast
what ever it is. the last motor they built for a friend was 1200HP but that was in A corvette and twin turbo. I am thinking around 800HP for this one.
I will keep you all posted.
This images is larger than 153600 bytes. Click to view.
this is a picture of the motor in my friends car to give you an Idea what they are doing to mine.

[This message has been edited by whodeanie (edited 07-30-2008).]

IP: Logged
N3M3S1S
Member
Posts: 3866
From: Dover, DE
Registered: Dec 2007


Feedback score:    (6)
Leave feedback





Total ratings: 51
Rate this member

Report this Post07-30-2008 07:00 PM Click Here to See the Profile for N3M3S1SSend a Private Message to N3M3S1SEdit/Delete MessageReply w/QuoteDirect Link to This Post
She's coming along nicely. Can't wait to see it get closer and closer to being finished!
IP: Logged
86fierokid
Member
Posts: 33
From: st.charles,missouri,usa
Registered: Jul 2008


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-30-2008 09:04 PM Click Here to See the Profile for 86fierokidSend a Private Message to 86fierokidEdit/Delete MessageReply w/QuoteDirect Link to This Post
wow man, that is going to be an amazing fiero cant wait for the updates.
IP: Logged
katatak
Member
Posts: 7136
From: Omaha, NE USA
Registered: Apr 2008


Feedback score:    (8)
Leave feedback





Total ratings: 82
Rate this member

Report this Post07-30-2008 09:28 PM Click Here to See the Profile for katatakSend a Private Message to katatakEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by whodeanie:

I cant leave any thing alone! every car or motorcycle I have ever owned I have customized.
the headlights are installed but not wired yet I am waiting on the plugs and the fog lights to finish that part.
last night I worked on the doors and front fenders to get them ready for the widebody kit.
I am not going to put it on yet because I still have a lot of work to do before I can.
Archie is sending me the side windows for the choptop and once I get them I will start the cutting then I can do the rest of the body.
I just dont want to install the bodykit just to take it back off again.
but I will keep you all posted. no pic's of the car today just bodywork.
to show you what kind of work I do here are some of the other projects of mine a little off topic but enjoy!
This images is larger than 153600 bytes. Click to view.
I built this one from the ground up.

UPDATE! I just got the rear bumper today I will post pic's tomarow.
This images is larger than 153600 bytes. Click to view.
my 07 streetglide repainted

and last but not least my 06 nightrain with a 103 stroker and NOS hp is 168.
it has made the cover of US rider and I bedlinered it no paint.



I love the seat cover on the last bike. I gotta learn how to build one of those. I dont need the bike, just the seat cover......

And your car is looking great. I really like those headlights. I know you got them from Xanth....where can I find some?

Be careful in your travels....Keep us posted. Really interested to see the chop.

Pat
IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-31-2008 08:38 AM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
Thanks for the complements on my car, and yes the seat cover on my bike was not bad ether.
Last night I worked on the front a bit more working out the top of the bumper and started the widebody on the drivers side.
the car to me looks great even though it is 6 differant colors I can still see the finished car it will just take a lot of work to get it there.
when I get back I will finish the drivers side and get the car in primer.
here are some pic's from last night.
This images is larger than 153600 bytes. Click to view.
This images is larger than 153600 bytes. Click to view.

This images is larger than 153600 bytes. Click to view.
IP: Logged
85LAMB
Member
Posts: 763
From: FL
Registered: Nov 2002


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-31-2008 03:02 PM Click Here to See the Profile for 85LAMBSend a Private Message to 85LAMBEdit/Delete MessageReply w/QuoteDirect Link to This Post
I just wanted to say you are doing a great job
Thaks for posting the pics.

Could you please post some more pics of the drivers side before put the 1/4 flares on.

Also could you PLEASE....... post detailed pics of the chop, I would love to see pics of where the cuts are done
specially the ones on the roof and sides.

Have you though about what wheels you will use ?

I noticed that you have the projector lamps on the inside..... they're should be mounted on the outside since they
are supposed to be the low beams.

Keep up the great work

[This message has been edited by 85LAMB (edited 07-31-2008).]

IP: Logged
whodeanie
Member
Posts: 3819
From: woodstock,Ga.,USA
Registered: Jan 2008


Feedback score:    (14)
Leave feedback





Total ratings: 120
Rate this member

Report this Post07-31-2008 04:07 PM Click Here to See the Profile for whodeanieClick Here to visit whodeanie's HomePageSend a Private Message to whodeanieEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by 85LAMB:

I just wanted to say you are doing a great job
Thaks for posting the pics.

Could you please post some more pics of the drivers side before put the 1/4 flares on.

Also could you PLEASE....... post detailed pics of the chop, I would love to see pics of where the cuts are done
specially the ones on the roof and sides.

Have you though about what wheels you will use ?

I noticed that you have the projector lamps on the inside..... they're should be mounted on the outside since they
are supposed to be the low beams.

Keep up the great work



I will post a more detailed picture set of the drivers side and the chop.
as far as wheels I was thinking about using a set from BonSpeed.
the projectors hit the top when they were in the other way so I changed them
IP: Logged
carnut122
Member
Posts: 9122
From: Waleska, GA, USA
Registered: Jan 2004


Feedback score:    (9)
Leave feedback





Total ratings: 83
Rate this member

Report this Post07-31-2008 06:42 PM Click Here to See the Profile for carnut122Send a Private Message to carnut122Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by whodeanie:


I will post a more detailed picture set of the drivers side and the chop.
as far as wheels I was thinking about using a set from BonSpeed.
the projectors hit the top when they were in the other way so I changed them


Looking great! PM sent.
IP: Logged
joesfiero
Member
Posts: 2181
From: North Port,FL,USA
Registered: Jan 2008


Feedback score:    (11)
Leave feedback

Rate this member

Report this Post08-01-2008 01:41 AM Click Here to See the Profile for joesfieroSend a Private Message to joesfieroEdit/Delete MessageReply w/QuoteDirect Link to This Post
So.................how much are you going to sell me those wheels for since you are going to need new ones? Right? Right? Seriously, how much

-JOE
IP: Logged
Previous Page | Next Page

This topic is 20 pages long:  1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20 
next newest topic | next oldest topic

All times are ET (US)

Post New Topic  Post A Reply
Hop to:

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock