Sabooo/Convictedredneck, I pre-reg. the Fiero however I have to stop at gate and reg. the truck and trailer. Name a time and a place and I'll be there. Later, John
IP: Logged
01:11 AM
sabooo Member
Posts: 859 From: Lehigh Valley, PA Registered: Aug 2006
Let's see - Gates open at 7am, and it's probably most of 2 hours to get to the fairgrounds. How about we plan to be ready to roll at 5am from the Starlite Diner in Fogelsville? They are 24 hours, so I will probably try to be there around 4am for breakfast, and I'll have my son along if I can get him out of bed. Let me know if this works.
All welcome to meet us there.
IP: Logged
08:19 AM
ConvictedRedneck Member
Posts: 1034 From: Easton, PA - USA Registered: Nov 2005
Let's see - Gates open at 7am, and it's probably most of 2 hours to get to the fairgrounds. How about we plan to be ready to roll at 5am from the Starlite Diner in Fogelsville? They are 24 hours, so I will probably try to be there around 4am for breakfast, and I'll have my son along if I can get him out of bed. Let me know if this works.
All welcome to meet us there.
As long as I'm going, works for me. SS brake lines, S10 booster, and headlights are all going in this week!
Lol nah nah nah... i was first in Fraze MN for the Tyler project ill be first on the scene for carlisle
you would have to leave very early in the morning to beat some of us there if i drive like a grandma i might be there in 45 minutes, and it may seem that grkboy707's fiero doesn't love him but it does it didn't wait for him to leave carlisle to seize up the brakes.
[This message has been edited by Macs86GT (edited 06-16-2010).]
you would have to leave very early in the morning to beat some of us there if i drive like a grandma i might be there in 45 minutes, and it may seem that grkboy707's fiero doesn't love him but it does it didn't wait for him to leave carlisle to seize up the brakes.
Lol both my fieros have new caliper's all the way around
Lol and im also taking double the risk. 8 caliper's 2 ICM's 2 engines 2 transmissions yada yada yada going up there. Might even tripple it with tomskies driving the green one.
[This message has been edited by pontiackid86 (edited 06-16-2010).]
IP: Logged
05:30 PM
grkboy707 Member
Posts: 3019 From: Kingsville, MD Registered: May 2009
Just a little anouncement to help out a friend, Chris Hahn is going to be bringing a few short shifter's with him for sale. one of them is going into my green 86 GT and I already have one in my red 87 GT and have had it in there for close to a year now. These shifters are amoung the best i'v seen in a fiero they shift very smoothley and dont give you the feeling of driving a truck when in your sports car. he puts them at vey competitive prices+ your stock shifter. If your in the market for a short shifter talk to Chris. I can speek for them in the Getrag 5 speed and am so impressed with it im going to try one in my 4 speed. There craftsmanship is great and they hold up very niceley. up until a few month's ago my 87 was my daily driver and im a rough shifter when it comes to driving and have not felt this shifter try to giveout at all... So if you want a short shifter talk to him. Also BOH and myself might... (MIGHT mind you all) have a little surprise for you all on sat. Im not gaurenteing anything though. (and no its nothing embarrising or imature like all of us from the short bus crew like to pull )
------------------
[This message has been edited by pontiackid86 (edited 06-18-2010).]
IP: Logged
04:41 AM
grkboy707 Member
Posts: 3019 From: Kingsville, MD Registered: May 2009
I would love to buy a short shifter, if my budget will allow... I'll wait till the end of the weekend, and if he hasn't sold out, and if I have $$$, I'll get me one! How much do they go for?
Just a little anouncement to help out a friend, Chris Hahn is going to be bringing a few short shifter's with him for sale. one of them is going into my green 86 GT and I already have one in my red 87 GT and have had it in there for close to a year now. These shifters are amoung the best i'v seen in a fiero they shift very smoothley and dont give you the feeling of driving a truck when in your sports car. he puts them at vey competitive prices+ your stock shifter. If your in the market for a short shifter talk to Chris. I can speek for them in the Getrag 5 speed and am so impressed with it im going to try one in my 4 speed. There craftsmanship is great and they hold up very niceley. up until a few month's ago my 87 was my daily driver and im a rough shifter when it comes to driving and have not felt this shifter try to giveout at all... So if you want a short shifter talk to him. Also BOH and myself might... (MIGHT mind you all) have a little surprise for you all on sat. Im not gaurenteing anything though. (and no its nothing embarrising or imature like all of us from the short bus crew like to pull )
The 4 speed is harder on the shift then the 5 speeds. Its the gravel box shifter. You need to watch the rough shifting pk smooth, fluid coordinated motions not jam slamming like some ricer who is trying to give his hamster a stroke.
IP: Logged
07:22 AM
PFF
System Bot
chrishahn87 Member
Posts: 1584 From: East Berlin, Pa - USA Registered: Dec 2004
Just a little anouncement to help out a friend, Chris Hahn is going to be bringing a few short shifter's with him for sale. one of them is going into my green 86 GT and I already have one in my red 87 GT and have had it in there for close to a year now. These shifters are amoung the best i'v seen in a fiero they shift very smoothley and dont give you the feeling of driving a truck when in your sports car. he puts them at vey competitive prices+ your stock shifter. If your in the market for a short shifter talk to Chris. I can speek for them in the Getrag 5 speed and am so impressed with it im going to try one in my 4 speed. There craftsmanship is great and they hold up very niceley. up until a few month's ago my 87 was my daily driver and im a rough shifter when it comes to driving and have not felt this shifter try to giveout at all... So if you want a short shifter talk to him.
Thanks for the kind words, P-kid! I will be bringing four shifters (one for p-kid is spoken for) to Carlisle, and the tools to install them.
THESE SHIFTERS WILL FIT ANY FIERO WITH A MANUAL TRANSMISSION.
I will INSTALL them for you AT the Carlisle show (if you would like me to). Prices: $35.00 installed - IF you allow me to take your stock shifter $50.00 if you just want the shifter, but dont want to give your stock shifter as a core.
Anyone who is interested in one of these for me to bring to / install @ Carlisle, either post on here or p/m me, so I can set one aside for you *It's pretty easy to find me at the show, I should be close to my Fiero (silver 87 gt, chrome 5-spoke wheels, TPI V8 motor)*
IP: Logged
08:24 AM
grkboy707 Member
Posts: 3019 From: Kingsville, MD Registered: May 2009
Thanks for the kind words, P-kid! I will be bringing four shifters (one for p-kid is spoken for) to Carlisle, and the tools to install them.
THESE SHIFTERS WILL FIT ANY FIERO WITH A MANUAL TRANSMISSION.
I will INSTALL them for you AT the Carlisle show (if you would like me to). Prices: $35.00 installed - IF you allow me to take your stock shifter $50.00 if you just want the shifter, but dont want to give your stock shifter as a core.
Anyone who is interested in one of these for me to bring to / install @ Carlisle, either post on here or p/m me, so I can set one aside for you *It's pretty easy to find me at the show, I should be close to my Fiero (silver 87 gt, chrome 5-spoke wheels, TPI V8 motor)*
Sounds like a good deal! Go ahead and set one aside for me; it'll be like a 90% chance I'll buy one.
I'll take one installed at carlisle i need to get rid of the Louisville slugger i call a shifter even with the gravel box shifter that is the 4 speed muncie.
IP: Logged
10:42 AM
chrishahn87 Member
Posts: 1584 From: East Berlin, Pa - USA Registered: Dec 2004
grkboy707 / macs86gt - I will definatly set one aside for you! I am not good at matching PFF screen names to faces.... so, you'll have to introduce yourself! I dont bite, im nice! LOL!
As far as that goes... I have one more left if anyone wants one? Stake your claim!
Macs - dont worry about the four speed trans! I had one of these shifters in my brother's Fiero (that he used to have) and had no problem with it! .....that shifter in his Fiero was made BEFORE I knew how to weld! HAHAHA!!! -Chris
IP: Logged
12:25 PM
chrishahn87 Member
Posts: 1584 From: East Berlin, Pa - USA Registered: Dec 2004
I finally got my Fiero back together. I just need to do the cleaning, and add the wire loom cover back on to cover up the wires. Then im ready for the show!
I got my balljoint situation figured out last night... This must have been a problem for a while! The "hole" where the balljoint shaft goes into, on that "knuckle" (???I dont know what the name of that peice is???) was oblong shaped, and apparently I had a bad balljoint before that wore that thing out! Weird! Never seen that before! Its a good thing that I saved a bunch of parts from a Fiero that had been wrecked over 10 years ago, so that poor dead Fiero could donate life back into another Fiero! The new knuckle part is in, all back together and tight. -Chris
IP: Logged
12:28 PM
Hulki U. My-BFF Member
Posts: 5949 From: Back home in East Berlin, PA Registered: Apr 2008
Well Back on holiday confirmed it today so ill let the cat out of the bag. as well as showing my 2 fiero's Back on holiday and myself are going to be vendor's this year there putting us right next to the fiero showfield much like last year. We will be there with a wide range of fiero parts such as interior and exterior engine and drivetrain parts I know for a fact BOH will have some 88 parts. My parts arnt any year spcific and are mosty cosmetic stuff. Were going to be pricing these parts very fairly and some of my parts i will be open to offers on.
Some of my things include Aux gauge setup's digital speedo 120 speedo rebuilt 2.8 heads corvette taillight lenses for pisa or alike pannels If theres any interist in them i have 2 18 inch corvette C6 wheels ill let go for cheap Misc interior parts misc exterior parts.
Im taking a trip to the bone yard before hand to get a few things to sell so if your looking for anything let me know and we'll work somthing out... Im not going to be able to pull anything big though.
IP: Logged
09:18 PM
Back On Holiday Member
Posts: 6238 From: Downingtown, PA Registered: Jul 2001
