Pennock's Fiero Forum
  General Fiero Chat
  A Real Mera in Paradise (Page 115)

Post New Topic  Post A Reply
Email This Page to Someone! | Printable Version

This topic is 178 pages long:  1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178 
Previous Page | Next Page
next newest topic | next oldest topic
A Real Mera in Paradise by Fiero-in-Paradise
Started on: 08-18-2009 04:06 AM
Replies: 7110 (186862 views)
Last post by: Vernonmera on 11-25-2023 05:59 PM
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post01-13-2012 08:16 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Wayne Wm. Peterson:
Then, to make things worse your going to be (gasp)......a "Flat Lander"!!!!


The area around an Indian Burial Mound is considered hill country ;-)

------------------


Dick
Mera #8046
1987 GT - T-boned (RIP)

IP: Logged
Wayne Wm. Peterson
Member
Posts: 378
From: Muskego, Wi, USA
Registered: Dec 2010


Feedback score: N/A
Leave feedback

Rate this member

Report this Post01-14-2012 04:29 PM Click Here to See the Profile for Wayne Wm. PetersonSend a Private Message to Wayne Wm. PetersonEdit/Delete MessageReply w/QuoteDirect Link to This Post
Don't be silly Dick, no self respecting Indian would be buried in Illinois.
There's no room, all the best spots are filled with union boss's.
IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post01-15-2012 12:29 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-16-2012 08:57 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Julian:

The M on the map pocket is cut from a sticker (silver) that I bought a long time ago from Rodney. I purchased 4 gold center wheel reproduction stickers and he threw in a sqare nose sticker with the word Corporate Concepts that I cut off.

Here in Canada it sucks that we need a front license plate. But you're right about making it simple. Just 2 "L" brackets. I tried putting it on the side under the blinker but it looked all wrong. The offset looks good on my Alfa Romeo though.

So is the hype still on for May 5th weekend somewhere in the North East? Forget the trip to Canada. How about a trip from Kalamazoo to Capac? Kalamazoo is central to Indiana, Ohio, Wisconsin, Canada, Michigan.


sample logo for the rally will have the city Kalamazoo & Capac added.


Trip will be just under 3 hours and can be broken up with a lunch in Lansing MI.
Some nice senic metro parks and photo opps. A=Kalamazoo & B=Capac

See how close you guys are to Kalamazoo MI.... the trip to Capac can be optional.
It's kind of on my way home back through Detroit, but for others it could be out of their way.


boy oh boy someones been busy NICE BANNER.....how'd you get the drawing of the Mera?? cool!
them tires are the "Rollin Fatties"
after my vacation in Arkham.....i am back!

oh i got something to add to this .....back in a few

[This message has been edited by batousai666 (edited 01-17-2012).]

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-16-2012 09:03 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post

batousai666

4222 posts
Member since Jun 2009
i need to find a different map....but i was thinking, to get Wayne more involved with a pot sweetener.......
maybe meet in Muskegon at the ferry terminal then to Pontiac and Capac.
i have the address to the GM Fiero Factory and a place in Pontiac less than a mile away, i want to check out as the 1st owner of Mera X.
the guy i bought from, bought from a dude (Marcell D) here in MI and i have an address for a Marcell D in Pontiac, MI
my hope is the neighbors are still around from 2006-07 era.......so, this could be a little Mera X history field trip.

OR....
if Wayne can make the Kazoo location...MY HOUSE!!!!!!!!
*gush* having 3+ Mera in my Driveway would be totally AWESOME!!!!!
How'd i get soooo lucky??? actually happens all the time
damn, get the IL (not IN Julian,haha) Fiero Club AND the MI Club and have a proper Fiero show. with us as the highlight, of course
i could fit 15 or so in my yard. side by side, also have a small city park just 1200 feet away too.....other overflow parking location
freak my nieghbors right the frick out, proper.....which is due

after a small show and shine at my house, blast back East thru AnnArbor, i got some eating challenges i want to tackle.
maybe spend the night in "HELL"....yes we have a Hell, MI.

http://yasr.com/events.htm
^^^^^ *EDIT* 1/17/12 now with that car show we could stay in Ypsilanti, MI

then from Hell/Ypsi. Sunday Jam to Pontiac-Capac.....hugs and kisses then home Sunday late afternoon.

me and "Mini Magnum" all balls blast back to Muskegon or Kalamazoo maybe a CannonBall to the IN border or something.....getyasum!!!

see if this shows....*EDIT* NOPE!!! dumb machines.....dumb things these machines

*EDITagain* now its just being stupid, got to find another map............the link is floch'ed.

new linky??

http://g.co/maps/sfbtz

*EDIT* 1/17/12
http://g.co/maps/7vqgq
^^^^^^^^
my final proposition.....promise

added West BloomField, MI Home of Mera #6001.....gotta get that in there

[This message has been edited by batousai666 (edited 01-17-2012).]

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-16-2012 04:13 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post

batousai666

4222 posts
Member since Jun 2009
heres a car show&shine for charity on May 5th in the area, maybe??
could be the stop for the night on the way to Pontiac and beyond............getyasum!!
http://yasr.com/events.htm

[This message has been edited by batousai666 (edited 01-16-2012).]

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-17-2012 10:35 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
and speaking of "MiniMagnum"......Wayne going all out
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-17-2012 10:45 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post

batousai666

4222 posts
Member since Jun 2009
 
quote
Originally posted by johnyrottin:

I will be trying to make the Kalimazoo meet but no promises. I will be moving to Illinois here at the end of the month...man, I hate cold weather!



what??!!! really......how far are you from TitusVille?? off the east coast by Orlando??
i know a guy with a package for me some wheels......PM phone number if close, no??
its a great way to get help with them huge couches you got to move in ......and meet a fellow Mera Guywin win!!!

another Mera in the area wont hurt one bit.....awesome!! beats last years Mera Reunion by one so far....cool!

[This message has been edited by batousai666 (edited 01-17-2012).]

IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post01-17-2012 04:27 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by johnyrottin:

I will be trying to make the Kalimazoo meet but no promises. I will be moving to Illinois here at the end of the month...man, I hate cold weather!



TRANSCOM?
IP: Logged
Julian
Member
Posts: 515
From: Ontario, Canada
Registered: Nov 2000


Feedback score: N/A
Leave feedback

Rate this member

Report this Post01-18-2012 11:04 AM Click Here to See the Profile for JulianSend a Private Message to JulianEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by batousai666:

heres a car show&shine for charity on May 5th in the area, maybe??
could be the stop for the night on the way to Pontiac and beyond............getyasum!!
http://yasr.com/events.htm



I like the way you think Dan...... I been looking too. If we move the date, there is always Dells Run (3 hrs north of Chi-town). A bit far for me BUT still do-able. It is the 2n'd largest Fiero show in the mid-west. May 31 - June 3.

------------------
Julian - MERA #8071

IP: Logged
Wayne Wm. Peterson
Member
Posts: 378
From: Muskego, Wi, USA
Registered: Dec 2010


Feedback score: N/A
Leave feedback

Rate this member

Report this Post01-18-2012 01:46 PM Click Here to See the Profile for Wayne Wm. PetersonSend a Private Message to Wayne Wm. PetersonEdit/Delete MessageReply w/QuoteDirect Link to This Post
I don't know if we can let you guys into Wisconsin?
Maybe IF....you got a cheese hat

The Dells is a very interesting place, LOTS of things to do, tons of places to eat and a lot of natural beauty behind it all.
If you do decide to do it we could meet up along the way and convoy in.
IP: Logged
PFF
System Bot
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-18-2012 02:12 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
why stop at one???? there are MI Fiero Club runs and show also all summer.

and Julian, as Chapter Members of the NIFE group we should attend a few of them, FireoRamma is over by Wayne to...
we could prolly book every weekend with Fiero related stuff to do......if so, i am Game
as long as i get to freshen up Mera X it will be a hoot.
i drive 100's of miles out of my way to the grocery store as is.

with the Trans Am fixed it will offer more variety for some Pontiac and beyond shows...........MetroBeach Criuse in Detroit.
Woodward cruise by Julian.....28th St cruise in GrandRapids in late summer.....all kind of places for you "RoadTrips" to end.

and speaking of my TransAm......
under 'er own power i got it backed out and turned around for the repair.
not sure what it is but its either a badly adjusted clutch doomahicky.....or a shot Transmission, but they put them in the Vipers and such so i dont think so.....soon!! very soon..........all 3 will be driveable

and how

[This message has been edited by batousai666 (edited 01-18-2012).]

IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post01-18-2012 05:28 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
You need to raise the exhaust tips on the T/A they never hung down that low from the factory. I should be an adjustment to the clamps holding the muffler. What is the problem with the transmission?
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-18-2012 11:38 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
sup Rick?? its more the clutch, when depressed it makes a horrible rattling sound.....while in gear and moving it goes away, but push in the clutch pedal and it starts again......horrible noise. i will try to get a video of it but its finally acting like winter up here SNOW!!!!!

got 13 inches of the white stuff over a 36 hour period, thats my "Pure Michigan" being MI in January

as far as the tips go i think the mount it broken......so i have to fix that,too........good eye

and speaking of a video.....whats this ticking noise i hear??
http://www.myspace.com/video/rid/110939494

D

[This message has been edited by batousai666 (edited 01-18-2012).]

IP: Logged
Wayne Wm. Peterson
Member
Posts: 378
From: Muskego, Wi, USA
Registered: Dec 2010


Feedback score: N/A
Leave feedback

Rate this member

Report this Post01-19-2012 10:26 AM Click Here to See the Profile for Wayne Wm. PetersonSend a Private Message to Wayne Wm. PetersonEdit/Delete MessageReply w/QuoteDirect Link to This Post


and speaking of a video.....whats this ticking noise i hear??
http://www.myspace.com/video/rid/110939494

D

[/QUOTE]

Ah.....your watch....your lifters.....your teeth (from the cold)....mice eating your wiring?
P.S. More snow coming your way Bud!
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-19-2012 12:35 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Wayne Wm. Peterson:

Ah.....your watch....your lifters.....your teeth (from the cold)....mice eating your wiring?
P.S. More snow coming your way Bud!


its funny when i woke up it said less than one inch.......well that was before the lake effect machine added 2 more

i dig the dig


IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post01-19-2012 01:19 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
We're pretty much stuck in the house, too--intense sunshine, but will brave the elements to go to Barrett-Jackson this afternoon. Maybe it will cloud up a little to ease the pain of the sun in our eyes.

------------------


Dick
Mera #8046
1987 GT - T-boned (RIP)

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-19-2012 09:38 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by reholmes:

We're pretty much stuck in the house, too--intense sunshine, but will brave the elements to go to Barrett-Jackson this afternoon. Maybe it will cloud up a little to ease the pain of the sun in our eyes.



ahahahaaa.....and Ye of 2 seasons, get to sift your cat box (yard) and play with wiggly, worms of poison.

see cold kills heat incubates.....you can have them critters......i will keep my 5 foot snow drifts, thankyou

have fun at Barrett-Jackson.....take a few thousand pictures, will ya??
IP: Logged
Julian
Member
Posts: 515
From: Ontario, Canada
Registered: Nov 2000


Feedback score: N/A
Leave feedback

Rate this member

Report this Post01-20-2012 12:52 PM Click Here to See the Profile for JulianSend a Private Message to JulianEdit/Delete MessageReply w/QuoteDirect Link to This Post
You guys kill me LOL

Where else can I have this much fun and still keep my clotes on?!?!?!

------------------
Julian - MERA #8071

IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post01-20-2012 05:20 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by batousai666:

sup Rick?? its more the clutch, when depressed it makes a horrible rattling sound.....while in gear and moving it goes away, but push in the clutch pedal and it starts again......horrible noise. i will try to get a video of it but its finally acting like winter up here SNOW!!!!!

got 13 inches of the white stuff over a 36 hour period, thats my "Pure Michigan" being MI in January

as far as the tips go i think the mount it broken......so i have to fix that,too........good eye

and speaking of a video.....whats this ticking noise i hear??
http://www.myspace.com/video/rid/110939494

D




If if makes noise when you depress the clutch, your hydraulic throw out bearing is bad, and will need to be replaced. The transmission will need to come out. At the same time I would replace the clutch disc and pressure plate. If the flywheel has "hot spots" you should remove it, and have it resurfaced. If it is too thin you should replace it. Button it back up and you will have years of dependable service.

By the way, it's sunny and 72 degrees here.

[This message has been edited by Rick 88 (edited 01-20-2012).]

IP: Logged
johnyrottin
Member
Posts: 5453
From: Northwest Florida
Registered: Oct 2007


Feedback score:    (8)
Leave feedback





Total ratings: 85
Rate this member

Report this Post01-20-2012 09:19 PM Click Here to See the Profile for johnyrottinSend a Private Message to johnyrottinEdit/Delete MessageReply w/QuoteDirect Link to This Post
Drove the MERA to 5 Guys for lunch today....lots of questions about it. Then after work I drove to the Acura dealer to look at a car for my firends kid...lots more questions there. Amazing how many people never heard of them.

[This message has been edited by johnyrottin (edited 01-20-2012).]

IP: Logged
PFF
System Bot
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-21-2012 09:16 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
THANKS RICK.....

i hope its not too bad but with having to drop the trans...that takes it out of my hands and in to a professionals.
damn.....that costs more.....well good news it that most people that have heard the Mera's Ticking believe its a lifter or something in the top end. coool.

so that is better than feared

as far as the Mera story goes....
i have found, that to have a copy of the sales brochure is handy when the words said, do not remove the look of disbelief and confusion off the guys faces car shows are the best cuz every body stops or says something under their breath and with good ears you can help fix that for them

knowledge is power!!!!get ya sum!!!

[This message has been edited by batousai666 (edited 01-21-2012).]

IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post01-21-2012 11:53 AM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
Dan, for some reason I cannot open you link to the engine noise. However if it is a lifter noise, it could be collapsed, or the rocker arm could have backed off. Worst case you might have bent a pushrod if you wound it too high. Can you isolate which bank the noise is on? If you are lucky and it's on the trunk side, it will be pretty easy to check out an fix. On the window side you will need to pull the upper and middle intake to make it easer to get to the rear valve cover. I had to do this when I installed my Comp Cam's 1.6 ratio steel roller rockers. With the right tools and patience, you can do this in a day.
IP: Logged
Wayne Wm. Peterson
Member
Posts: 378
From: Muskego, Wi, USA
Registered: Dec 2010


Feedback score: N/A
Leave feedback

Rate this member

Report this Post01-21-2012 01:58 PM Click Here to See the Profile for Wayne Wm. PetersonSend a Private Message to Wayne Wm. PetersonEdit/Delete MessageReply w/QuoteDirect Link to This Post
Dan, It looks like an expensive winter for you my friend. I would wish you more snow, to make more $$$ BUT...that would mean I would get it first!

Say, what do you think is harder to get rid of, sand, or snow? Maybe the "Litter Box League " like that gritty feeling in their; teeth, hair, ears & crouch ?

Remember: Snow goes, sand blows


P.S. I can't get anything from your link either.

[This message has been edited by Wayne Wm. Peterson (edited 01-21-2012).]

IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post01-21-2012 05:15 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
Hey, at least we don't have to put up with all that "yellow snow". The correct terminology isn't Litter Box League. It's Sandy Acres!

[This message has been edited by Rick 88 (edited 01-21-2012).]

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-21-2012 08:08 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
sorry guys i got nothing.....that link works for me on this end.
whats it do when you hit the link??
 
quote
Originally posted by Rick 88:

Dan, for some reason I cannot open you link to the engine noise. However if it is a lifter noise, it could be collapsed, or the rocker arm could have backed off. Worst case you might have bent a pushrod if you wound it too high. Can you isolate which bank the noise is on? If you are lucky and it's on the trunk side....



well then Rick i am in luck....it is the trunk side left of the oil cap

would a bent pushrod make the cars performance take a dive, too??

 
quote
Originally posted by Wayne Wm. Peterson:
Remember: Snow goes, sand blows
P.S. I can't get anything from your link either.



Wayne....thats too funny.

*edit*
how aboot this one??
http://www.myspace.com/vide...4973/noise/108482748

and or maybe this one??
http://www.myspace.com/522944973/videos

http://www.myspace.com/video/522944973/n...
nope^^^ but is this what ya'll see??

[This message has been edited by batousai666 (edited 01-21-2012).]

IP: Logged
Wayne Wm. Peterson
Member
Posts: 378
From: Muskego, Wi, USA
Registered: Dec 2010


Feedback score: N/A
Leave feedback

Rate this member

Report this Post01-22-2012 11:14 AM Click Here to See the Profile for Wayne Wm. PetersonSend a Private Message to Wayne Wm. PetersonEdit/Delete MessageReply w/QuoteDirect Link to This Post
No
No
No
Two black box's with no image in them AND:
A Sever Error.
I still think it's a MAC thing.
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-22-2012 06:35 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Wayne Wm. Peterson:

No
No
No
Two black box's with no image in them AND:
A Sever Error.
I still think it's a MAC thing.


i dont get it....i can see all links above (cept the last one) on this new computer.....But switch to the old one and all i get is clicks and frustrations......i give up.NOT!!!!

test!!!
http://www.myspace.com/vide...ay-21-2011/107884135

*edit*
i get browser unsupported....on this old XP computer but my WIN 7 works fine............smash smashsmashsmash!!!!!!

heres something....i cannot get on MySpace with this XP computer at all. "browser Unsupported" weird!!
again the WIN7 works fine...........and my space is the only site affected.

[This message has been edited by batousai666 (edited 01-22-2012).]

IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post01-22-2012 07:12 PM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by batousai666:
and speaking of a video.....whats this ticking noise i hear??
http://www.myspace.com/video/rid/110939494

D



Sounds like tappets to me. Pull that cover and take a look and feel.

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-22-2012 07:19 PM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by reholmes:


Sounds like tappets to me. Pull that cover and take a look and feel.


ahhh you wiggled right in ......wait Richard you can see the Link??
thats odd.....thats the first posted one, tooo hummmmmm........

[This message has been edited by batousai666 (edited 01-22-2012).]

IP: Logged
Wayne Wm. Peterson
Member
Posts: 378
From: Muskego, Wi, USA
Registered: Dec 2010


Feedback score: N/A
Leave feedback

Rate this member

Report this Post01-22-2012 08:01 PM Click Here to See the Profile for Wayne Wm. PetersonSend a Private Message to Wayne Wm. PetersonEdit/Delete MessageReply w/QuoteDirect Link to This Post
IP: Logged
PFF
System Bot
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-23-2012 09:35 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Wayne Wm. Peterson:

Here we go again guys!
http://cgi.ebay.com/ebaymot...&hash=item3cc12dc08a


or not! i would own the 328 ^^^ well before this monstrosity, egads and puke, even.
http://classiccars.com/list...ew-jersey-08831.html

but this one on the other hand!!! SD.....2.7L in Michigan!!! CRAAAAAAAAAAAPPPPPPPP!!!!!!
http://classiccars.com/list...-michigan-48083.html

this ones not tooo bad.....GTO anyone??
http://classiccars.com/list...-michigan-48083.html

[This message has been edited by batousai666 (edited 01-23-2012).]

IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-23-2012 11:34 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post

batousai666

4222 posts
Member since Jun 2009
i would sell a kid for this.........holly crap!
http://www.beebesmotors.com...2006-Noble-M400.aspx

and this is for Julian....check it bragh!!
http://classiccars.com/list...-michigan-48336.html
IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post01-23-2012 03:55 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
Dan, a bent pushrod would definitely make the engine run poorly. If you are lucky the rocker arm nut just backed off. Either way you need to remove that valve cover and take a look. If one of the rocker arms is off to the side, check the rocker nut, rocker arm and definitely the pushrod for any visible damage. You can roll the pushrod on flat surface to make sure it is not bent. Replace it if it is. If the rocker nut is loose, replace it with a new one. These are self locking nuts and will not hold if they are damaged. You will have had to really wing the motor to damage the rocker arm itself. After replacing the damaged parts, you will need to readjust the valve. If you get that far, we can help you with that too.
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-24-2012 08:03 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Rick 88:

Dan, a bent pushrod would definitely make the engine run poorly. If you are lucky the rocker arm nut just backed off. Either way you need to remove that valve cover and take a look. If one of the rocker arms is off to the side, check the rocker nut, rocker arm and definitely the pushrod for any visible damage. You can roll the pushrod on flat surface to make sure it is not bent. Replace it if it is. If the rocker nut is loose, replace it with a new one. These are self locking nuts and will not hold if they are damaged. You will have had to really wing the motor to damage the rocker arm itself. After replacing the damaged parts, you will need to readjust the valve. If you get that far, we can help you with that too.


thanks again Rick.....just waiting for it to warm up. i do not want to open something on the engine then be forced to work in the cold, so in late March will be the time. i also am looking for someone who will help me at my house. not too thrilled with letting the Mera go to a strangers house quite yet

i got some money saved for jackstands and tools i need. (swivel knuckles and 1/4 extentions, ect) so it will come, but not soon.
unless its continues to be above normal, temp wise. we had a ThunderStorm last night......that was weird. nice loud one too.....woke right up out of bed type, BOOM!!

[This message has been edited by batousai666 (edited 01-24-2012).]

IP: Logged
Rick 88
Member
Posts: 3914
From: El Paso, TX.
Registered: Aug 2001


Feedback score: (5)
Leave feedback

Rate this member

Report this Post01-24-2012 05:49 PM Click Here to See the Profile for Rick 88Send a Private Message to Rick 88Edit/Delete MessageReply w/QuoteDirect Link to This Post
Dan, if you have Harbor Freight Tools up there, they will save you money on tools. They are not the greatest tools but for what you are doing they should be more than adequate.
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-25-2012 09:39 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Rick 88:

Dan, if you have Harbor Freight Tools up there, they will save you money on tools. They are not the greatest tools but for what you are doing they should be more than adequate.


ha "great minds"......
I even have a coupon for 2@3 ton Jack stands $14.99. which are on sale at 24.99 this month to boot
also, looking at 1/4 torque wrench with swivel knuckels and a impact gun with socket.
I already have gotten the compressor and was holding out for later in the year for the warmth.
i thought i should consider a large generator (we lost power up here alot last year) but so far its been good, so that money is allocated for tools now

next i cancel the cable TV and get another $70/month for other nick-nacks along the way and to free up some time
kinda looking forward to it and i now you all are, too.haaaaaa!!!!

[This message has been edited by batousai666 (edited 01-25-2012).]

IP: Logged
reholmes
Member
Posts: 920
From: Phoenix, AZ, USA
Registered: Jul 2001


Feedback score: (1)
Leave feedback

Rate this member

Report this Post01-25-2012 11:13 AM Click Here to See the Profile for reholmesSend a Private Message to reholmesEdit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by batousai666:
1/4 torque wrench


I'm wondering how useful this would be--these usually only range up to about 15 ' #
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-26-2012 08:49 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by reholmes:


I'm wondering how useful this would be--these usually only range up to about 15 ' #


oh really?? i was going for the smaller size and profile for the tight spots......i have negociated recently with a friend for a 3/8's drive.
so i guess i will go with that only. Thanks Richard you saved me almost $20. atta-boy!!
IP: Logged
batousai666
Member
Posts: 4222
From: MI usa
Registered: Jun 2009


Feedback score: (3)
Leave feedback

Rate this member

Report this Post01-26-2012 09:27 AM Click Here to See the Profile for batousai666Send a Private Message to batousai666Edit/Delete MessageReply w/QuoteDirect Link to This Post

batousai666

4222 posts
Member since Jun 2009
 
quote
Originally posted by Wayne Wm. Peterson:

Here we go again guys!
http://cgi.ebay.com/ebaymot...&hash=item3cc12dc08a

http://cgi.ebay.com/ebaymot...&hash=item2318dcacf3
over $17,000 really!?? feels good to have a "maybe" Mera under $10,000 i guess. if this Testa' had a larger V6 or a V8, of course, but the 2.8?? uggg!
IP: Logged
Previous Page | Next Page

This topic is 178 pages long:  1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178 
next newest topic | next oldest topic

All times are ET (US)

Post New Topic  Post A Reply
Hop to:

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock