I do have them! How about I go pull one and get it out today (Friday) for 25.00 shipped? Thanks Pat
quote
Originally posted by oneinch:
I need one pair of headlight cover torsion springs. Will buy both pairs if necessary/available. My understanding these are universal 85-88. I have an 88.
[ Hey man, how's it going! Thanks for keeping me active, I try to get the parts and photos out to people and it seems like I have a never ending supply of things I continue to trip across. Let me know if you need anything else. Thanks Pat ]Originally posted by Shho13:
That now makes sense. Let's do this. Please check with Larry hubbert at lhubbert2@brighthouse.com He has a lot of 88 stuff and will most likely have all the bolts readily at hand. I do have quite an assortment of the bolts but it would take some time and digging to attempt to locate and verify that they are the specific bolts and washers that you need. If he does not then let me know and we can go from there. Thanks Pat
quote
Originally posted by Carver1:
I have an 88 that was converted to an earlier cradle. I'm putting it back and have most of the parts. I do believe it is 10 bolts total.
I am taking apart an 87 gt now so let me take a look tonight and get a couple of photos. Please email me at handymanpat926@yahoo.com if I have one it would be cheap probably 10.00 shipped. Thanks Pat
quote
Originally posted by WKDFIRO:
Back on top,
Looking for a V6 Clutch Slave Cylinder heat shield. 87 GT
I ha e a couple laying around. Please email me your address at handymanpat926@yahoo.com I did not realize you had written me until just now. Thanks Pat QUOTE]Originally posted by Raydar:
Pat... Do you have a prop for a front hood/trunk? Need the brackets, too. 30170. Thanks!
I spent the weekend sorting things into tubs. I have a huge tub of heat Shields so I may have the ones you need. Please send me a photo of the shields you need ( if you still need them) Thanks Pat QUOTE]Originally posted by Kitskaboodle:
Hi Pat, I’m looking for two items: 88 alternator heat shield bracket 86-88 GT coil shield /sheet metal piece. Thanks, Kit[/QUOTE]
I spent the weekend sorting parts into tubs and I now have a huge tub if heat shields. Please send me a photo of what you need and I will take a look. Thanks Pat
quote
Originally posted by WKDFIRO:
Back on top,
Looking for a V6 Clutch Slave Cylinder heat shield. 87 GT
Do you still need this part? I just tossed one into the trash can last weekend I am going back and reading some of the parts requests and just saw this post. Trash goes out Thursday morning. Thanks Pat
I have a huge tub of all kinds of brackets. Please send a photo of what brackets you need and I will dig one out for you! Thanks Pat QUOTE]Originally posted by Chaddiesel:
Do you happen to have the mounting brackets for an Isuzu 5 spd? [/QUOTE]
Hey man, it's been a while! How are you doing? I do have one or two but I would want to grab them and make sure if the condition they are in. Will you please email me at handymanoat926@yahoo.com so I can send you photos You should come on down to fieroland for another visit, I will send back a front air dam for Blake with you! Thanks Pat
Just wanted to say thanks to Pat for an easy quick place to get parts. Quick response and shipping! Some others on here dont even respond so a big Thank you Pat!
Pat also took care of me on an 88 cradle as I was headed west. A+ service !
So, Pat, I came back to north Louisiana after I picked up an 87 GT. We can talk about a non sunroof top later. But , do you have a engine hatch release servo assy ?
I do! How about 50.00 shipped? I can get it ready tonight and get it in the mail tomorrow on the way out of town. Thanks Pay
QUOTE]Originally posted by gatorfrey:
Pat also took care of me on an 88 cradle as I was headed west. A+ service !
So, Pat, I came back to north Louisiana after I picked up an 87 GT. We can talk about a non sunroof top later. But , do you have a engine hatch release servo assy ? [/QUOTE]
Thanks for people letting people know. I hate waiting and wondering and then when it finally does ship sometimes the parts come damaged or missing. (My last two purchases came that way) I try to make sure it goes out on a timely basis and arrives in good condition. Just like I would want my purchases to be handled. Thanks again, Pat
quote
Originally posted by shemdogg:
Just wanted to say thanks to Pat for an easy quick place to get parts. Quick response and shipping! Some others on here dont even respond so a big Thank you Pat!
Just wanted to say thanks to Pat for an easy quick place to get parts. Quick response and shipping! Some others on here dont even respond so a big Thank you Pat!
shem
[This message has been edited by handymanpat (edited 12-22-2021).]
