LOTS of parts from all years!

I probably do
What year car?
Thanks Pat

quote Originally posted by 0z: Do you have 2 sets of GT rear bumper reflectors?

------------------
pat moody

88 GT

quote Originally posted by handymanpat: I probably do What year car? Thanks Pat

65.00 shipped
I have the one set I will sell.
If that does not work maybe check with Larry Hubbert
Lhubbert2@brighthouse.com
Thanks Pat

quote Originally posted by 0z: 88 GT

[This message has been edited by handymanpat (edited 07-30-2021).]

Pm Sent

Pat!!!

Im looking for 87-88 Fiero 2.5 A/C Hose the one from the compressor to the car.
it has a bit of extra bracketry vs the pre 87

I'm looking for a pair of visors as in sun visors. They're going to be recovered so they don't have to be perfect

PM sent

BUMP for an awesome guy that's helped me many times, and hopefully again!

Sending a PM now!

------------------
"Discord"
Red 1988 GT under restoration!

Let's Go Mets!

( ͡° ͜ʖ ͡°)

I'm looking for rear sway bar and brackets for 1988.

Dr Xtreme

I asked my friend Larry Hubbert to get in touch with you, he has those parts.
Thanks Pat
QUOTE]Originally posted by DrXtreme:

I'm looking for rear sway bar and brackets for 1988.

Dr Xtreme[/QUOTE]

Hi Pat, I’m looking for two items:
88 alternator heat shield bracket
86-88 GT coil shield /sheet metal piece.
Thanks, Kit

I have some heat shields and can take a look for one
Can those brake calipers be bought new? I thought they could be.
Will you check your local auto parts store or eBay. I have some but they would need rebuilt, you could have one for just shipping costs.
It would be best to buy a new one if you can.
Please email me at handymanpat926@yahoo.com
Thanks Pat

Please send your cores to Russ Wormuth (Rwupholstery.com)
He will recover your old cores to look like new
Thanks Pat

quote Originally posted by davespades1970: I'm looking for a pair of visors as in sun visors. They're going to be recovered so they don't have to be perfect

Do you happen to have a 1988 rear passenger tail light housing. I need the black mounting piece. If you have one it would be going to 12835. Thanks

I do!
I sell them for 150.00 a set.
They are in excellent condition and have no broken or repaired tabs.
I would prefer to sell them as a set.
I am guessing shipping to be 25.00
Thanks Pat

I’m looking for a driver side door latch assembly. Car is an 88 not sure if that matters.

I have that stuff sitting around but can you please send me a photo of the specific assembly parts?
If I have what you need you can just have it.
I took a door or two apart and out all the guts in a couple of big Home Depot buckets
Please send you photos to handymanpat926@yahoo.com
Thanks Pat

quote Originally posted by Tappy350: I’m looking for a driver side door latch assembly. Car is an 88 not sure if that matters.

Hi, I'm looking for stock 88 fiero rear suspension parts.
the lateral/toe links, both the adjustable and non-adjustable ones.

Larry Hubbert has a ton of that stuff
Lhubbert2@brighthouse.com
I have some but he has lots!
Thanks Pat

I did have the photo.
Larry hasn't responded to my email, any chance you'd be willing to sell me a full set?
If so, let me know how much.

Let me dig them out tonight and get a photo and see what you think.
I talk with Larry quite often and send people to him all the time.
He did tell me he has some also so maybe take a look at both of ours and see which ones look the best for you.
I know he spends a lot of time having stuff sandblasted and cleaned so maybe he has some that are in better cosmetic condition.
Either way you go is fine with me.
Will you please email me so I can send you photos tonight
My email is handymanpat926@yahoo.com
Thanks Pat

Pm sent

Looking for Gen 1 headlight motors. Specifically passenger side.

Thanks!

I will check to see what I have
The motors would be untested if I do have any.
Thanks Pat
UOTE]Originally posted by dayv27:

Looking for Gen 1 headlight motors. Specifically passenger side.

Thanks![/QUOTE]

Hello!

I am looking for a good condition v6 thermostat housing, can you help me out?

I sent you a response to your pm
Thanks Pat

------------------
pat moody

Received parts ordered. Thanks Pat!

Thank you for the kind words.
I’m glad I was able to help out!
Thanks again
Pat

quote Originally posted by FormulaGT: Received parts ordered. Thanks Pat!

Anybody needing parts, Pat should be your go-to. Great to work with, stuff arrives packed with care and plenty of padding, pricing is reasonable and you may get more than you expected (bonus parts). I got my first shipment of parts from Pat yesterday, and I'm sure there will be many more to come.

Thanks for letting people know.
Your shipment really tested my packing skills, it was a real trick to package such a variety of very easily breakable parts and get it all to you in one piece!
Your next box will be MUCH easier!
Thanks Pat

------------------
pat moody

Do you have the horn contact parts for a 3 spoke steering wheel?

I do have that part but because it is so difficult to come by I would like to keep those with my columns and horn buttons
Maybe check with Larry Hubbert at lhubbert2@brighthouse.com
Thanks Pat

quote Originally posted by 87Fiero: Do you have the horn contact parts for a 3 spoke steering wheel?

------------------
pat moody

Hey Pat,

Do you have any front springs from 85-87 GT or WS6 code suspension? Also how much shipped to 92115?

Thanks,
Joe

Hey Pat - Do you have weatherstripping for an 88 GT T-top?

I need one pair of headlight cover torsion springs. Will buy both pairs if necessary/available. My understanding these are universal 85-88. I have an 88.

------------------
Stanton
'88 Formula, red on gray

I do!
It’s free (with the purchase of my t top project car)
It really would take me selling the entire car to let that stuff go!
Sorry about that.
Thanks Pat

quote Originally posted by decrawford1: Hey Pat - Do you have weatherstripping for an 88 GT T-top?

------------------
pat moody