Good to hear Tim, I have just been having trouble with UPS and there service. I have had two packages come apart and a third is missing at this point, they said it was tried to have it first del. and then was damaged. The guy here on the forum that is missing his said he lives in an apartment complex and they always leave a note or leave it at the main office. That didn't happen so I called them and they said it was damaged and they would call me back today, yet still haven't heard from them?
I am going to the machine shop tonight to see just how many of the second order is complete, rotors redrilled that is, all the brackets and the rings are done.
Also Iwan, your brackets and rings are getting shipped today. Via US Mail
Again guys, thanks for your support and I am just glad I was able to help you guys out since I needed them also. I am off work today but have all but returned back full time so my time is again limited other then nights. But I will do what is needed to finish this all up for you guys.
OK EVERYONE!!!!! If you didn't get an e-mail from me tonight and are wanting an 88 brake upgrade you need to e-mail me ASAP. Also please don't send anymore P.M.'s about the brake upgrade, just e-mail me so I only have to keep checking one place and its easier for me, that is if you guys don't mind, thanks!!!
As of tonight I have about half of the second order paid for from you guys, I am going to ship them tomorrow unless I get called into work. I did have some problems with the first order when they were shipped out, I have thought of a few ideas I am going to do that will fix those problems I hope, unless they have another truck roll over or something?
Anyway, I will e-mail tracking numbers when they do get shipped, I will do it Monday if I work tomorrow, Monday here looks like its going to be a really crappy cold rainy day, so I will most likely not work.
I am just letting you guys know I was called into work today it did not rain here yet, I think its still coming though so I may not work tomorrow, if not I will get some shipping done. I will then later that day e-mail you guys some tracking numbers. I am sorry, I am going to bed now I am so sleepy!!!!
Also, I did get all the e-mails returned that I had so if you sent one you got one back tonight.
I was gone over the weekend guys, I sent out most of the rotor orders on Friday and then e-mailed everyone the tracking numbers. If you didn't get a tracking number e-mail me. I did have 1 guy back out so I have a left over set of standard rotors already redrilled and ready to ship if anyone wants to buy them. Also I did have 1 rotor I got had a wrong number on it so it was shipped back last week and the right "new one" should be here soon.
I know there are two guys I talk to today....anyone else looking for a set? I do need to make one more small order here soon and its going to be the last one, so I guess you can say it is now last call on these from me!!!!
I have placed an order of 20 more rotors-5 sets and I am going to be done after that. 1 standard rotor set is also ready to ship right now. The 5 sets will be completed mid next. ------------------ Bobby from NW Indiana 93 Northstar and 5 speed Getrag 219customs@verizon.net My 86 GT build thread MY 88 Northstar build thread
[This message has been edited by GSXRBOBBY (edited 05-03-2005).]
IP: Logged
08:48 PM
GSXRBOBBY Member
Posts: 3122 From: Southern Indiana USA Registered: Aug 2003
No problem, well there was problems but we fixed them! I am just glad I was able to help everyone out that needed and/or wanted them!!!
So are these rotors zinc plated, heck I didn't know how to tell. Also, in the future if we need replacement rotors or what not, where can we get them, re-drill the bolt pattern, so forth. Just curious for me later on.
IP: Logged
01:31 AM
Tom Slick Member
Posts: 4342 From: Alvarado, TX Registered: May 2003
So are these rotors zinc plated, heck I didn't know how to tell. Also, in the future if we need replacement rotors or what not, where can we get them, re-drill the bolt pattern, so forth. Just curious for me later on.
Replacement rotors I don't really know. I guess I can try when that time comes to get replacement ones? Otherwise maybe WCF will have them by then? 95% of the rotors I just sold were cross drilled so I hope he see's how much of a demand they are!!!!!
Got mine today...what a great job Bobby has done for the forum. I know it was a lot of work, I hope that everyone is grateful for all of his hard work. THANKS!!!
IP: Logged
09:23 PM
May 6th, 2005
GSXRBOBBY Member
Posts: 3122 From: Southern Indiana USA Registered: Aug 2003
Your going to make me blush!!! No but really thanks for the kind words and I am glad I was able to help and that your happy.
I did have a few e-mails, I have had to add a small delay to a few people and I promise you guys will be taken care of Monday. Thanks guys for being understanding, I had a few wrong numbered part added to my last order and they have been fixed. Also I have one guy, "you know who you are" waiting on just brackets and rings, I sent you an e-mail. They will be shipped Monday as well.
Again guys I have had alot of kind words and thank you again for those...I am just glad to help. To me thats why I belong to the forum! E-mail Cliff and thank him for all of this...that is why what I was able to do was able to happen.
LAST CALL !!!!!!!! Saturday afternoon I am going to put in the last order of cross drilled rotors. I am getting 12 that are already sold at this point and if anybody wants a set you need to contact me ASAP!!!!! Standard rotors can be shipped within a few days, cross drilled take a week and half to get. I am also doing to the set of brackets and rings!!!!!!!
I am not going to be doing this again or doing anymore orders after this so speak up now!!!!!!
Thanks again for all the support I was given and I am really glad to see that things have workedout for everyone.
