Hello I was wondering if someone had a coolent plumbing diagram for the 3800sc that incorporates the heater core and if it is better to use the fiero t stat housing or the 3800 housing
Spoon
MAR 25, 08:54 PM
I don't have a diagram but here's a link that may help you. I like the Fiero t-stat housing because you can check or change the t-stat anytime without the use of tools and you can easily fill and bleed air from the cooling system.
------------------ "Kilgore Trout once wrote a short story which was a dialogue between two pieces of yeast. They were discussing the possible purposes of life as they ate sugar and suffocated in their own excrement. Because of their limited intelligence, they never came close to guessing that they were making champagne." - Kurt Vonnegut
Meatpiemonday
MAR 25, 09:12 PM
Thanks for the reply that link is perfect. One last question. The fiero t stat housing does it have to be modified due to its angle? Again thanks for the reply
Spoon
MAR 30, 07:26 PM
quote
Originally posted by Meatpiemonday:
Thanks for the reply that link is perfect. One last question. The fiero t stat housing does it have to be modified due to its angle? Again thanks for the reply
Yes it has to be cut, rotated and tilted to clear the boost diaphragm valve and point in the correct position for the coolant and heater hose.
Spoon
------------------ "Kilgore Trout once wrote a short story which was a dialogue between two pieces of yeast. They were discussing the possible purposes of life as they ate sugar and suffocated in their own excrement. Because of their limited intelligence, they never came close to guessing that they were making champagne." - Kurt Vonnegut
