I got a pair of Ausie fiberglass door rocker from a member here and I just wanted to know if any one has a pair laying around that maybe you don't want?
It's the fiberglass part for the doors that are fixed to the bottom of the door and taper to a smaller size near the front wheel. I've notice that most only use the Ausie side vent w/the stock side panels panels.
I got a pair I'm not using, if I read your post right, you are looking for a pair?
Rick
Yeah, your reading it right. Do you want to sell them? I have a second project I'm working on (hint, hint Exoticse) and I may need a second set for castroplasmic fx.
[This message has been edited by madcurl (edited 06-07-2004).]
Rick is at work until later tonight, but I'm sure we could work something out. It would be cool to have them go to good use instead of getting all dusty in the garage. I'll send you a pm with phone #'s to discuss it more if ya like. Rick will be off work Tues-Thur. this week.
I need to get my own user name!
Jennifer (Mrs. Rickady) lol
IP: Logged
madcurl Member
Posts: 21401 From: In a Van down by the Kern River Registered: Jul 2003
Yeah, your reading it right. Do you want to sell them? I have a second project I'm working on (hint, hint Exoticse) and I may need a second set for castroplasmic fx.
LOL i tell u what this guy does not waste any time !
Listen curls, I hear tthey just passed a new law out in California that you cannot have more than two bad a** cars per resident. Sooooooo it looks like you are gonna have to ship one of those babies out to me here in florida.
Any of the three amigos will do.
"castroplasmic " lmao,....i love it !
[This message has been edited by exoticse (edited 06-07-2004).]
IP: Logged
Philphine Member
Posts: 6133 From: louisville,ky. usa Registered: Feb 2000
Thanks Rickyaddy88Gt for the Ausie lower door rockers. I talked to V8Archie and I can now proceed. My glassman will jump on my "castroplasmic" pipe dream project soon. Although the idea is stuck in my head.......It will evenually ooozzz-out once I have time to draw it!
Oh yeah, If anyone has another one for sell.......PM me.
Thanks madcurl
[This message has been edited by madcurl (edited 06-15-2004).]
IP: Logged
Fie Ro Member
Posts: 3621 From: The Netherlands, Europe Registered: Sep 2001
Thanks Rickyaddy88Gt for the Ausie lower door rockers. I talked to V8Archie and I can now proceed. My glassman will jump on my "castroplasmic" pipe dream project soon. Although the idea is stuck in my head.......It will evenually ooozzz-out once I have time to draw it!
Oh yeah, If anyone has another one for sell.......PM me.
Thanks madcurl
Okay, anyone else? and it's a bump
IP: Logged
AusFiero Member
Posts: 11137 From: Dapto NSW Australia Registered: Feb 2001
It looks like we're at the stage we should guess what the Heck are you planning! I could think of a few things, seeing the redux...But I am not going to tell ya! Oh well....I have no clue
IP: Logged
exoticse Member
Posts: 7897 From: Orlando, Fl Registered: Jun 2003
It looks like we're at the stage we should guess what the Heck are you planning! I could think of a few things, seeing the redux...But I am not going to tell ya! Oh well....I have no clue
I was thinking maybe some sort of side "strake" or something?
IP: Logged
NotAFieroAnyLonger Member
Posts: 4413 From: 75762/Texas/USA Registered: Dec 2003
You planning on doin something like a testarrosa door with all those rockers. Space them one above the other and them meld them all into a scoop behind the door? Am I warm? Only reason I can see to need three sets of these......but I have a limited imagination.....hmmmmm ....curious......
IP: Logged
exoticse Member
Posts: 7897 From: Orlando, Fl Registered: Jun 2003
You planning on doin something like a testarrosa door with all those rockers. Space them one above the other and them meld them all into a scoop behind the door? Am I warm? Only reason I can see to need three sets of these......but I have a limited imagination.....hmmmmm ....curious......
Three sets on one car ??? Uhhhhh...... no.
IP: Logged
Fie Ro Member
Posts: 3621 From: The Netherlands, Europe Registered: Sep 2001
.....ehm what would I do...3 sets of 2 pieces right? I would put a piece in the middle on top of both two frontlid vents on the redux. put another 2 pieces (1set) in between on the plain frontlid, all 4 pieces evenly spaced horizontally...(like the frontlid on the chrysler Crossfire prototype) Then there's a set left to put on the engine decklid or to the lower rocker flares...
IP: Logged
madcurl Member
Posts: 21401 From: In a Van down by the Kern River Registered: Jul 2003
.....ehm what would I do...3 sets of 2 pieces right? I would put a piece in the middle on top of both two frontlid vents on the redux. put another 2 pieces (1set) in between on the plain frontlid, all 4 pieces evenly spaced horizontally...(like the frontlid on the chrysler Crossfire prototype) Then there's a set left to put on the engine decklid or to the lower rocker flares...
Your Way off. Hehehehehe. The only clue(s) are:
1. It's been done before so i take no credit for the idea. 2. You need to have the Ausie kit to actually see where "these" parts can be placed, and 3. It's a no brainer...once you see the end result.
Disclaimer: These are just "Pipe Dreams" and are only one paper drawings. Thanks Ausie.
IP: Logged
madcurl Member
Posts: 21401 From: In a Van down by the Kern River Registered: Jul 2003
You planning on doin something like a testarrosa door with all those rockers. Space them one above the other and them meld them all into a scoop behind the door? Am I warm? Only reason I can see to need three sets of these......but I have a limited imagination.....hmmmmm ....curious......
Huhhhhhh? Just like Exoticse said? Three on one car!!!!!!!!!!!!!!!? hehehehe.
The Testarrosa is and was a beutiful car while watching Miami Vice but that's 80's lets move on please. just about everyone has copied those lines. Give me a couple of weeks.....I'll send a pic. Warning: you may not like what you see. Hehehehe.
[This message has been edited by madcurl (edited 07-29-2004).]
IP: Logged
exoticse Member
Posts: 7897 From: Orlando, Fl Registered: Jun 2003
