Update System
  Pennock's Fiero Forum
  Totally O/T
  I'm just going to say it...

Post New Topic  Post A Reply
Email This Page to Someone! | Printable Version


next newest topic | next oldest topic

I'm just going to say it...

by 82-T/A [At Work]
Started on: 11-08-2026 04:33 PM
Replies: 7 (103 views)
Last post by: 82-T/A [At Work] on 11-15-2026 01:03 PM
82-T/A [At Work]
Member
Posts: 26580
From: Florida USA
Registered: Aug 2002


Feedback score: (1)
Leave feedback





Total ratings: 202
Rate this member

Report this Post Click Here to See the Profile for 82-T/A [At Work]Send a Private Message to 82-T/A [At Work]Edit/Delete MessageReply w/QuoteDirect Link to This Post
This engine, hooked up with a FAST EZ-EFI 2.0 or a FAST XFI 2.0 system would go awesome in a Porsche 944.

The entire LQ1 engine with accessories weighs about the same as a Porsche 944 motor with all the accessories.

Both engines would fit.


1984 Porsche 944, european spec, puts out 170hp at 140ft-lbs of torque... the US ones put out closer to 150hp. But the LQ1 3.4 puts out 215hp in standard trim. But with a good exhaust system, a modern engine management system with sequential port fuel injection like with the XFI 2.0... you'd be putting out closer to 250hp... and that thing would just SING in Porsche. I know people put LS motors in there... but that's just too much raw power. The 250hp from this 3.4 DOHC is very manageable, and perfectly positioned for a high-revving sports car.


https://www.ebay.com/itm/197934800515?
IP: Logged
PFF
System Bot
Valkrie9
Member
Posts: 2976
From: Toronto, Ontario, Canada.
Registered: Jan 2021


Feedback score: N/A
Leave feedback

Rate this member

Report this Post Click Here to See the Profile for Valkrie9Send a Private Message to Valkrie9Edit/Delete MessageReply w/QuoteDirect Link to This Post

' The blue outline is the Toyota 2JZ 3L iron block, but that's another layer. '
_
[ ' An unfortunate smelting accident ! ' ~ Goldmember ]
_
[ Porsche 944 LS Swap ]
_
[ Atlas Fitting ]
_
' So, you see Mr. Powers,
World Domination begins with far too much Power ! ' ~ Goldmember, the Flying Dutchman !


[This message has been edited by Valkrie9 (edited 11-08-2026).]

IP: Logged
82-T/A [At Work]
Member
Posts: 26580
From: Florida USA
Registered: Aug 2002


Feedback score: (1)
Leave feedback





Total ratings: 202
Rate this member

Report this Post Click Here to See the Profile for 82-T/A [At Work]Send a Private Message to 82-T/A [At Work]Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Valkrie9:


' The blue outline is the Toyota 2JZ 3L iron block, but that's another layer. '
' So, you see Mr. Powers,
World Domination begins with far too much Power ! ' ~ Goldmember, the Flying Dutchman !






It's cool, that's for sure... but I just feel like the 944 needs some DOHC love, and something that can handle slightly higher RPMs. I don't hate the 2.5 Porsche motor... I used to own an 84 944. But ... it's hard to explain. The 944 is a VERY tossable car. In my non-professional / highly emotional opinion about cars... I feel like an LS motor is just too much. The 944 was never built to be a drag strip car, and you don't really want it to be one. It's just not built for it and doesn't do a good job of it. It was built to be a car that handled really well. To this day, the 944 is one of the best handling cars Porsche has ever made. It even had it's own racing class if I'm not mistaken.

The 3.4 DOHC has excellent low-end torque, and because of the dual overhead cams, it produces excellent top-end power (for what it is). I feel (e.g. emotions) that the 3.4 DOHC is an excellent motor for both power, sound, and characteristics to match with the handling of the Porsche 944.

The Turbo 944 was a bit harsh because it kind of came on fast, and occasionally people would lose themselves in a turn because it was hard to modulate. They ended up coming up with the 944 S, which had dual overhead cams on the 2.5, and I think even upgraded to a 3.0 at one point. It's been a LONG time since I looked at this stuff (sold my 944 back in 2008).


One day I'd like to get one again. Interesting thing... I found a rare Middle-East spec Porsche 944 in the junkyard in South Florida many years ago. It had the rare Euro-spec bumpers, but made to US standards. In the 80s, the US required big ass bumpers, where as the European spec was far less regulated (both emissions and safety). So it produced more power, and had fiberglass bumpers in the front. The fiberglass bumpers had integrated fog lamps, with much smaller bumper pads. The US one was made of solid aluminum... heavy aluminum. The Middle-Eastern spec one was basically the Euro-Spec bumper, but instead of fiberglass, it was made of aluminum (a little bit thinner than the US spec). It also had the integrated fog lamps, and used the Euro-Spec bumper pads. They're really sought after. I have the bumper sitting inside the VW bus (which is in storage) next to the 160mph speedometer from the Euro-Spec.

One day, I'll buy another one... but I'll want a different engine. An LQ1 with an XFI 2.0 system giving it modern SFI control... would just be awesome.
IP: Logged
Valkrie9
Member
Posts: 2976
From: Toronto, Ontario, Canada.
Registered: Jan 2021


Feedback score: N/A
Leave feedback

Rate this member

Report this Post Click Here to See the Profile for Valkrie9Send a Private Message to Valkrie9Edit/Delete MessageReply w/QuoteDirect Link to This Post

Porsche 968 with an LQ1 swap, twin turbo, intercooled, methanol/water injection, yeah, sure, it would be very good indeed.
' Make more power for World Domination ! '

IP: Logged
82-T/A [At Work]
Member
Posts: 26580
From: Florida USA
Registered: Aug 2002


Feedback score: (1)
Leave feedback





Total ratings: 202
Rate this member

Report this Post Click Here to See the Profile for 82-T/A [At Work]Send a Private Message to 82-T/A [At Work]Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Valkrie9:
Porsche 968 with an LQ1 swap, twin turbo, intercooled, methanol/water injection, yeah, sure, it would be very good indeed.
' Make more power for World Domination ! '




I'm really particular about it too. That dash design is the 1988+ or 1987+, I can't remember... but I actually don't even like the new dash. I really actually prefer the super-simple... no **** 1984 and 1985 Porsche 944. I think I even prefer the 1984 even more than the others because it didn't have power steering, so it gave a much more attached feel to driving.
IP: Logged
Valkrie9
Member
Posts: 2976
From: Toronto, Ontario, Canada.
Registered: Jan 2021


Feedback score: N/A
Leave feedback

Rate this member

Report this Post Click Here to See the Profile for Valkrie9Send a Private Message to Valkrie9Edit/Delete MessageReply w/QuoteDirect Link to This Post
+MeToo !
Yeah, the early dash is preferred.
Gee, I wonder, can a late model be back-dated ?
What chopping and hacking would be necessary ?

onder:
IP: Logged
82-T/A [At Work]
Member
Posts: 26580
From: Florida USA
Registered: Aug 2002


Feedback score: (1)
Leave feedback





Total ratings: 202
Rate this member

Report this Post Click Here to See the Profile for 82-T/A [At Work]Send a Private Message to 82-T/A [At Work]Edit/Delete MessageReply w/QuoteDirect Link to This Post
 
quote
Originally posted by Valkrie9:

+MeToo !
Yeah, the early dash is preferred.
Gee, I wonder, can a late model be back-dated ?
What chopping and hacking would be necessary ?

onder:



This is from when I was restoring my 84 Porsche 944. The factory gauges are supposed to be yellow. It was supposed to look futuristic for 1984, but as a Pontiac person, I always preferred the red-needled gauges, with standard font, etc. So, the gauges I installed actually came from a special version of the Porsche 924. Speedometer is from a Porsche 924 Turbo, and the tachometer is from a Porsche 924S. In mid 1985 I think, Porsche upgraded the 944 with the newer dash, but the Porsche 924 at that point was called the 924S, and continued to use the older dash up until 1988 I believe. The "core" chassis of the 924/944/968 are all identical, so any dash from any year will fit into any one of those Porsches. The only thing that really changed was just fender flares and bumpers and such.




The big problem is finding a good dash. It kills me when I think about it, but back when I took this picture, I think the year was like... 2006 or something? Back then, these cars were all over the junkyard. I lived in South Florida, and of course, we have only the fanciest of cars in the junkyard. There were Maseratis, Porsches, V12 Jaguars, V12 Mercedes, and V10 BMWs all over the place. Like... all day long. Every week I'd go in there, I'd see a DOHC V8 Maserati Quattroporte from any one of the three generations.

Last time I went to that junkyard, it was all Buick egg SUVs and the most interesting thing I saw was a Porsche Boxster. But anyway, at the time... there were lots of Porsche 924s and 944s, so many of them. You name it... they had the part. But these things are rare as **** now, and parts are insane.
IP: Logged
82-T/A [At Work]
Member
Posts: 26580
From: Florida USA
Registered: Aug 2002


Feedback score: (1)
Leave feedback





Total ratings: 202
Rate this member

Report this Post Click Here to See the Profile for 82-T/A [At Work]Send a Private Message to 82-T/A [At Work]Edit/Delete MessageReply w/QuoteDirect Link to This Post
Sorry, what I meant to say is... if you do find a replacement dash, it's probably going to be totally shot. But, there are places who will wrap the entire dash in leather with stitching on the corners. This dash (in the image above) ... even though I had a dash pad on it, it was completely uncracked, unpainted, it was perfect. You just don't see those anymore.
IP: Logged

next newest topic | next oldest topic

All times are ET (US)

Post New Topic  Post A Reply
Hop to:

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Fiero Headlight Control Module
Fiero Related Auctions on eBay

Copyright (c) 1999, C. Pennock