I've been reading and searching about engine mounts for my series 2 sc swap into my '88 formula. I've hear Purple Rein were good, and then seen a few posts that said not. I emailed WCF and haven't gotten a reply back. It seems a lot of the info I am gathering is outdated, thus this post. Can someone turn me on to some decent already built mounts and possibly axles for the 4t65eHD. Thanks.

Fierox's mount are back up for sale. He sold his business to another guy but the shop that makes the mounts is the same. Just make sure he knows which version of the 4t65e you have: early or late.

quote Originally posted by don297: Fierox's mount are back up for sale. He sold his business to another guy but the shop that makes the mounts is the same. Just make sure he knows which version of the 4t65e you have: early or late.

Thanks, who do I contact to order?

quote Originally posted by TbirdMarc: Thanks, who do I contact to order?

Here is the thread where they are sold. Contact the OP.
https://www.fiero.nl/forum/Forum4/HTML/068018.html

It's not a mount, but I would strongly recommend these https://www.fiero.nl/forum/Forum4/HTML/064284.html We've seen a couple cradles torn, even with a 4-cylinder.

Don

quote Originally posted by craigsfiero2007: Here is the thread where they are sold. Contact the OP. https://www.fiero.nl/forum/Forum4/HTML/068018.html

Thanks, ordered a set today.

quote Originally posted by TbirdMarc: Thanks, ordered a set today.

Theae mounts work well with the stock auto Fiero DRV side axle and a built Pass side axle. I build the pass side axle if not looking to build urself.

quote Originally posted by MstangsBware: Theae mounts work well with the stock auto Fiero DRV side axle and a built Pass side axle. I build the pass side axle if not looking to build urself.

I thought the auto axle was too thin.. I would be interested in getting a pass axle from you.

quote Originally posted by TbirdMarc: Seems like a good idea, will def get a set of these.

Ordered, thanks for this info.

quote Originally posted by TbirdMarc: I thought the auto axle was too thin.. I would be interested in getting a pass axle from you.

Nope....Have ran one for the last 6 years and so have many others. When ur ready for a built Pass side axle send me a PM...

quote Originally posted by MstangsBware: Nope....Have ran one for the last 6 years and so have many others. When ur ready for a built Pass side axle send me a PM...

PM sent!

quote Originally posted by TbirdMarc: PM sent!

Relied to PM sent a few days ago but didn't get another PM besides that one..