Let's post our exhaust sound clips. Note what you have for engine and exhaust with the sound clip. Be nice to hear all kinds of swaps and stock too.
I have a Tweeked injected ZZ4 5.7 V8 with sanderson stainless headers flowing through dual 2.5" custom mandrel pipe, magnaflow mufflers out corsa tips.
The first part is outside the car about 20' from the rear and the second part is inside the car, hope you like. Snapperhead Sound Clip
Vince
------------------ Hop Till You Drop!! www.worldwidefieros.com "Uniting Fiero Owners Worldwide" Add Your VIN's to the Worldwide Fieros Registry!! Add Your Car Shows to the Worldwide Fieros Show Dates!!
86 GT " Snapperhead" .. Lambo Doors, ZZ4 FI 350, 5sp, Car pc, Laser Blue 87 GT "Whipersnapper" .. 2.8, Auto.. Planning a LS4 Conversion 88 Formula.. 2.8, Auto, Stock, White... Wife Ride 85 Gt Black, 2.8, 4sp, Lowered and ready for paint. 99 K2500 Suburban, 454, 4X4, The Tow Rig 04 Trailblazer, 4x4, Green, Wife Ride
[This message has been edited by Snapperhead (edited 05-04-2010).]
IP: Logged
06:57 PM
PFF
System Bot
fieroguru Member
Posts: 12128 From: Champaign, IL Registered: Aug 2003
Didn't we do one of these threads recently? Anyway...
It's a GM 3.4 V6 crate engine with the SSI Stage 3 camshaft, Trueleo intake & exhaust manifolds, Buick GN throttle body, and Ocelot cat-back exhaust. It also has 19 lb/hr injectors, the Fidanza aluminum flywheel, and GM 1227730 ECM.
IP: Logged
12:42 PM
PFF
System Bot
Fiero Thomas Member
Posts: 4668 From: Round Lake Beach, IL Registered: Jul 2005
Engine details are 355 SBC w/ProComp Heads Stage 2 port/polish, Extreme Energy Cam, Hilborn Injection, Sanderson cc90 headers to 3" collector, to modified FlowMaster, out stock tips. This dyno run sound file is with bad cam and only pulling up to 5,500 rpm, but it's the only file I have right now.
Since engine was rebuilt it now pulls to 7,500 rpm with no sweat (would pull more but I won't go there). Naturally engine sounds a lot better now that first shops errors were fixed, will do another recording after final fine tune is done.The idle sound file was made yesterday, rebuild engine fully broken in, and you notice this Hilborn setup idle nicely between 6-700 rpm, which will surprise a lot of people !!! Picture of Tach taken as same time recording was made.
[This message has been edited by Snapperhead (edited 05-04-2010).]
IP: Logged
08:23 AM
PFF
System Bot
LitebulbwithaFiero Member
Posts: 3378 From: LaSalle, Michigan Registered: Jun 2008
Originally posted by Hockaday: Meh mecham...i've been thinking about them but they wont restock them at fieroaddiction.com not sure if anyone really runs that site anymore.
He's no longer doing anything Fiero related. So if you're waiting for them to show up there, you'll be waiting a very long time.