Nothing special here but my Fiero does have original paint but a very non-original 3800SC series III
Most of the mods make this car a sleeper, engine, suspension, trans. The only accessories are Progressive Wheels, Mr Mikes Upholstery, a Glovebox, Wood Dash kit and a few gauges.
------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, 3.4" Pulley, N* TB, LS1 MAF, Flotech Exhaust Autolite 104's Custom CAI 4T65eHD w. custom axles, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
IP: Logged
10:58 AM
Fiero Thomas Member
Posts: 4669 From: Round Lake Beach, IL Registered: Jul 2005
The next major project is to chop the top. Probably this winter. I'm presently shopping for some new wheels. I got a PM asking about the seats.. They're out of a Cadillac Catera and yeah, they're power.
[This message has been edited by Doni Hagan (edited 05-18-2009).]
This was actually last fall, as you can tell. I haven't done anything more to the exterior since then a air/water intercooler to the 3800sc, ZZP headers and fabricated new 3" exhaust.
IP: Logged
12:50 PM
Rolling Thunder Member
Posts: 1244 From: College Station, TX Registered: Aug 2008
Well RollinRedGT is alive and back on the streets for another season! So far so good haven't been on the tow truck yet!! But I'm keepin the number handy!! These were taken today at a friends place after we changed the dogbone bushings.
------------------ 1985 Fiero GT
IP: Logged
11:22 PM
May 18th, 2009
wolf63 Member
Posts: 265 From: Brighton Colorado Registered: Aug 2007
Well RollinRedGT is alive and back on the streets for another season! So far so good haven't been on the tow truck yet!! But I'm keepin the number handy!! These were taken today at a friends place after we changed the dogbone bushings.
This is my '84 SE after I removed the body and replace it with an '86 GT Body. I was thinking of replacing the SE wheels with the GT ones, but I like this look. The baby blue pin stripe around the bottom I am not 2 fond of. I bought the quarter windows from modernman on ebay, they are alright, but are pretty thin. I need to find a stonger double sided tape, I used the 3m and it is not holding very well. Some of the panels still need to be aligned but I am getting there. These cars are great to work on.
Here is one taken with my new cell phone this past weekend. NOTE: Besides the side scoop, the rest of the paint on the car is the original 1986 factory paint.
------------------ Happiness isn't around the corner... Happiness IS the corner. ZZ4 Powered !!
[This message has been edited by Oreif (edited 05-22-2009).]
Nothing special here but my Fiero does have original paint but a very non-original 3800SC series III
Most of the mods make this car a sleeper, engine, suspension, trans. The only accessories are Progressive Wheels, Mr Mikes Upholstery, a Glovebox, Wood Dash kit and a few gauges.
Dennis,
I really like your wheel choice. What are they? I have searched all over for Mille Miglia Spider wheels and unfortunately they are no longer imported into the US so I settled on Eagle 192s. They are nice but not really the look I wanted. The other issue is rim width, none of them come wider than 7.5". Just curious.