Why is this?? There are no more PM switches available anywheres. I e-mailed The Fiero Store and they have no plans on re-manafactururing them. I find this stupid....they got other stuff / parts that are less a priority than this PM switch. Plus, I check at GM for one and they are dis-continued, plus they sold for 70$. Like I mean that's overpriced for a switch. I always happens when you need then they are always gone.
Some one on here know where to find one??
As for TFS, FieroWarehouse, The Fiero Factory, none....already been there.
------------------ fierogt28
88 GT, loaded, 5-speed
IP: Logged
08:29 PM
PFF
System Bot
avengador1 Member
Posts: 35468 From: Orlando, Florida Registered: Oct 2001
Can find one from a Camaro and "make it fit" its not too much work, or you can take the guts out and put it in the Fiero one if the clips arent broken.
IP: Logged
08:36 PM
winger1955 Member
Posts: 579 From: toledo-ohio-usa Registered: Jan 2008
I tried many times to contact Kick-Hill but never any answer. It doesn't seem that they want business.
Like if you buy something and its the wrong part, imagine how hard it will be to speak to someone to serve you to regulate the problem. I'm not flaming the business, I just never get an answer.
------------------ fierogt28
88 GT, loaded, 5-speed
IP: Logged
10:12 PM
fierogt28 Member
Posts: 2962 From: New-Brunswick, Canada. Registered: Feb 2005
Can find one from a Camaro and "make it fit" its not too much work, or you can take the guts out and put it in the Fiero one if the clips arent broken.
That could be a possibilty, but there are very small pieces that are hard to reassemble. My switch tabs that screw into the PM & PW plate are solid. The internals are corroded and burnt.
I tried finding a re-built thread on here for this PM switch rebuilding, but know success. That would be nice.
------------------ fierogt28
88 GT, loaded, 5-speed
IP: Logged
10:17 PM
Max The Chainsaw Member
Posts: 1141 From: Danville, IL Registered: Oct 2000
Hmm, if there is enough interest, maybe Rodney could get some made. On my GT, the passenger side doesn't work, but I know the problem. When I had the center console out, I had a hard time plugging in the connection..a real tight fit, and I didn't make a good connection, I didn't try it out and put the console back in. It is a PITA (IMHO) to open it all back up just to redo that connection.
Would one from a 84 SE fit .are they the same switch as the 86 to 88 ? . Anyway if you think it would fit or make two out of one , You can have this one if you like whit the power window switch for free
Would one from a 84 SE fit .are they the same switch as the 86 to 88 ? . Anyway if you think it would fit or make two out of one , You can have this one if you like whit the power window switch for free
if he dosent take it ill but it off you iv been looking for the black switches.
