Page 2... MINE MINE MINE...

quote Originally posted by 88GTFormula: k... heres a few... you see where its going kinda... and a hood that will open near identical to this...

Good Luck, Remember we have seen some of your bodywork...

------------------

Choptopped WideBody GT 1 of 1

[This message has been edited by NotAFieroAnyLonger (edited 04-09-2005).]

GRR, you had to steal page 2 eh...?

Yea, I was in a hurry on that.. im taking my time now.. kinda

quote Originally posted by 88GTFormula: GRR, you had to steal page 2 eh...? Yea, I was in a hurry on that.. im taking my time now.. kinda

Yep!!
ALWAYS take your time!

quote Originally posted by NotAFieroAnyLonger: Yep!! ALWAYS take your time!

Got less than a month till carlisle, I'd like to get the basic wide rear and front end minimum done by then... And the entire body primered

Started work on the original scoop today to bring it closer to the FieRo/Yellowstone scoop specs....
The old scoop turned out ok untill the dark winter came and I used the headlights a lot. The tension of the headlight door springs caused some cracks in my vent, marked red on this side. The first scoop was put together mostly with fiberglass putty/kittyhair, forgot to think about flexing of the hood caused by these headlight door springs. I will add some fiberglass reinforcements (green) to make some kind of bracing...first I did some sanding and cutting before doing the reinforcements.

first layer of fiberglass

This will make it even more efficient...:

...playing "dentist" on the other side...

..Yellowstone, did you got some more work done?

No, I was busy today with replacing one rear tire (screw srewed it up) and with doing my front brakes (installing SS brake hoses and rebuilding calipers). One of the bleeder screws ripped off and now I have to find a new caliper QUICK. Drilling and tapping didn't work out. I have an appointment on Wednesday to get my wheels finally legal so Fiero needs to get back on the street...

quote Originally posted by Fie Ro: ..Yellowstone, did you got some more work done?

left or right front caliper?.....I still have the fronts of my old 86 if I am right....

Left, but I just found one 10 km from here... Thanks anyways!

quote Originally posted by Fie Ro: left or right front caliper?.....I still have the fronts of my old 86 if I am right....

Bump... Oh, I've made a little progress myself

pulling the shape of the vent etc. off mine to attempt and sell them... hehe

~Tim

All of this fiberglass work has gotten to me. I just went out and bought some mat, resin, hardener, bondo, spreader, sandpaper. I'm going to attempt to make a custom side scoop that fits where the original driver side black grill thing is. I thought I might as well start off small and do something I can "add" on without ruining anything.

Thanks for motivating me