Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  passanger side park lights dont work

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


passanger side park lights dont work by drebinpk
Started on: 07-31-2011 06:04 PM
Replies: 5
Last post by: solotwo on 07-31-2011 10:49 PM
drebinpk
Member
Posts: 577
From: bridgeton mo
Registered: Apr 2009


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-31-2011 06:04 PM Click Here to See the Profile for drebinpkSend a Private Message to drebinpkDirect Link to This Post
ok so i have replaced all my bulbs and still my front passenger side marker and turnsignal light dont work as park lights however they do work as turn signals anyone have an idea what it could be?
IP: Logged
PFF
System Bot
Gall757
Member
Posts: 10938
From: Holland, MI
Registered: Jun 2010


Feedback score: N/A
Leave feedback





Total ratings: 90
Rate this member

Report this Post07-31-2011 09:22 PM Click Here to See the Profile for Gall757Send a Private Message to Gall757Direct Link to This Post
IP: Logged
drebinpk
Member
Posts: 577
From: bridgeton mo
Registered: Apr 2009


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-31-2011 10:04 PM Click Here to See the Profile for drebinpkSend a Private Message to drebinpkDirect Link to This Post
already tried changing the bulbs and that didnt fix it
IP: Logged
Gall757
Member
Posts: 10938
From: Holland, MI
Registered: Jun 2010


Feedback score: N/A
Leave feedback





Total ratings: 90
Rate this member

Report this Post07-31-2011 10:14 PM Click Here to See the Profile for Gall757Send a Private Message to Gall757Direct Link to This Post
Bad ground or the spring contacts in the socket don't work...broken wire.....wrong bulb.....

I got a bad bulb one time where the filaments were crossed..... can you check for power in the socket?
IP: Logged
drebinpk
Member
Posts: 577
From: bridgeton mo
Registered: Apr 2009


Feedback score: N/A
Leave feedback

Rate this member

Report this Post07-31-2011 10:25 PM Click Here to See the Profile for drebinpkSend a Private Message to drebinpkDirect Link to This Post
where would the ground be? and i have tested the bulb in the other turn signal so i know its good
IP: Logged
solotwo
Member
Posts: 5379
From: Grand Rapids, MI. USA
Registered: Jun 2002


Feedback score:    (9)
Leave feedback





Total ratings: 62
Rate this member

Report this Post07-31-2011 10:49 PM Click Here to See the Profile for solotwoSend a Private Message to solotwoDirect Link to This Post
I just did this on the other side. I had a bad ground inside the socket. Got a new socket from napa. Be careful when installing the bulb in the napa socket. If you continue to twist the bulb it will continue to turn in the socket and the contacts on the bottom of the bulb will be on the wrong strip in the socket. Dont ask how I know. LOL.


Steve W.
NE Grand Rapids, MI
88 Coupe

[This message has been edited by solotwo (edited 07-31-2011).]

IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock