Just don't try and run this setup without a dogbone. It's very destructive to do so.
When you get the tune right, you're going to love it! I did this swap on my 89 GP 5 speed a few years back and I loved it.
Which injectors/fuel rail did you use? The engine I used was a 2001 and it used a higher pressure regulator on the rail. The injectors were something funny too, so I stuck some older AL head 2.8 injectors in. With the higher pressure the 2.8 injectors were close enough to be driveable on a stock .bin from a 2.8/3.1
[This message has been edited by KurtAKX (edited 05-30-2008).]
