Personalized decklid vents and other things (Page 16/49)
Danyel JAN 07, 04:13 PM
Send Paypal addy and total please THX
Danyel JAN 08, 12:15 AM
Rich PM replied
Danyel JAN 08, 02:40 AM
You have been Paypal'd THANKS

------------------

My Build Thread
Tylers Toy
My LED Marker Kits for sale

silver 85 sc JAN 08, 07:01 PM
Got lucky this week. Grabbed a drop of 18 ga stainless 2b 16" wide X 120" long. I should be able to get a few parts out of that one.

Rich
taps JAN 09, 06:01 PM
how much would it be for the dash, stereo, shifter surround and also the map pocket replacement?
carnut122 JAN 09, 07:13 PM
 
quote
Originally posted by silver 85 sc:


(Daneele When you get pictures I would love to post one here along with Tyler's Dream I did for Jay.)



The Pontiac Fiero "disc" runs $16.00 Key chains not included

Special rockers (look below the door):


What are the dimensions on the disc? How much extra to ship to 30183?

[This message has been edited by carnut122 (edited 01-09-2012).]

carnut122 JAN 09, 07:16 PM
Oops!

[This message has been edited by carnut122 (edited 01-09-2012).]

silver 85 sc JAN 09, 10:34 PM
[QUOTE]Originally posted by carnut122:

[QUOTE]Originally posted by silver 85 sc:


(Daneele When you get pictures I would love to post one here along with Tyler's Dream I did for Jay.)



The Pontiac Fiero "disc" runs $16.00 Key chains not included

Special rockers (look below the door):


What are the dimensions on the disc? How much extra to ship to 30183?



I can make it any size you want. I don't have any on hand.

Rich
silver 85 sc JAN 09, 11:11 PM
Time to refresh the pricing. Lots of people have been asking.

notch or GT vents $50.00 per set 16 ga or 14 ga stainless customizing add $30.00 depending on material availability

Badges $15.00 (2.5" -4" tall) 16 ga stainless

Gauge cluster $15.00 18 ga stainless

Aux ga $5.00 18 ga stainless

Radio surround $10.00 18 ga stainless

Shifter surround $10.00 18 ga stainless specify manual or auto. Can do with or without ashtrays.

Rocker cover $65.00 16 ga stainless if I have drop pieces Price will be $100.00 if I have to cut it out of a full sheet Shipping has been running $49.00 per set several drop pieces are currently available. Images extra

Key chains $7.00 18 ga stainless Can do custom for additional cost

Wind chime circle only $16.00 16 ga stainless use keychains to fill 6"-10" in diameter if larger contact me for qoute

"Pontiac" for rear bumpers $6.00 16 or 18 ga stainless will need to puchase adhesive

Door sills $25.00 per set 18 ga or 16 ga stainless can do any lettering if I have the font; images add $25.00 per set can be combined with vents if need be.

Shifter surround pod $65.00. Not perfect yet, but really close. I have the latest revision ready to bend. 18 ga stainless

The map piece shown in the thread was at $10.00 18 ga or 16 ga depending on material availability

If I am missing anything that has been seen on other cars let me know and I will get pricing posted.

I currently have some odd run key chains on hand I cut them a little to big. I also have some of the finalized key chains on hand check a head for specific availability ie. Forumula, GT, and plain Fiero.

If you are interested in the cookie cutters I have made check with Paul Vargyas at NIFE. He owns the dies. http://www.fierofocus.com/

If you are interested in the Lambo door hinges that I am linked to you need to contact Jesse (88lambofiero) http://www.fiero.nl/forum/Forum1/HTML/078049.html

And of course I have to plug DIYstu's dew wipes. I make the felt and mirror tabs. http://www.fiero.nl/forum/Forum4/HTML/043801.html

Stainless can be painted or powdercoated with out any problem.

I have suspended the fuel tank project due to funds and an available car to fit one. There is no way my wife will let me keep a car up on blocks to iron them out.

I am looking into the center console and radio surround. Have had several requests on these. I may start the drafting process this month.

Another project on the drawing board is trunk lid dress ups I have them drawn, however have not checked fit yet.

GT sail panels are also drawn. I lucked out a work we have a hexagon punch that would work perfect for a GT sail panel with honeycomb where the clear area would be. Then the Pegasus would be laser cut and spot welded where the black would be behind the door post. I hope to have these in the $75-$85/set range.

Currently I am open to other suggestions. Preferably easy ones since I have been putting in close to 60 hours a week.

Rich
carnut122 JAN 09, 11:51 PM

quote
Originally posted by silver 85 sc:


I can make it any size you want. I don't have any on hand.

Rich



I'm thinking of making a clock face out of it. Can I get the 12 holes around the perimeter too? Do you do non-Fiero (as in a Ford oval in thicker steel)? I can provide a tracing of it.

[This message has been edited by carnut122 (edited 01-09-2012).]