 
     |
| Clip for holding throttle cable on 4.9L swap needed. P/N? (Page 1/1) |
|
Dennis LaGrua
|
MAY 11, 10:18 PM
|
|
|
My 4.9L swap is finally finished was started today and it sounds awesome. Time to make a custom throttle bracket and adapt the Fiero V6 throttle cable. I just need to find the clip that holds the throttle cable to the throttle body pulley. When I bought that 61K mile powertrain, the clip was missing. . Does anyone have a HELPS part number? That stupid clip is the only thing that I need t make the car road worthy. Any and all tips are appreciated. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|
Shho13
|
MAY 12, 02:03 AM
|
|
Hey Dennis!
I plan on doing this technique to modify my v6 cable to work on my swap.
Edit: Misread your post... Blech. Sorry this won't help your problem! My bad!
------------------
"Discord"
Red 1988 GT under restoration!
Let's Go Mets!
( ͡° ͜ʖ ͡°)[This message has been edited by Shho13 (edited 05-12-2019).]
|
|
|
|
Cajun
|
MAY 12, 07:38 AM
|
|
Dennis, not sure if this will be of any help? When I swapped the 2.8 for a 3.4 I ended up miss placing the clip. I tried several sources but none panned out. I ended up going to a hardware store and purchasing several "C-clips". One did fit and has been in place several years now.
|
|
|
|
phonedawgz
|
MAY 12, 03:06 PM
|
|
I have a nice pick and pull yard next to my work. Lots of 4.9s sitting in there if you need me to get a clip.
http://www.google.com/maps/...2FAF1QipOYyIXDrLCjks wZ5At0o5wQHXCRsRNRUf57Gdh-%3Dw284-h160-k-no!5sgibsons%20auto%20-%20Google%20Search!15sCAQ&imagekey=!1e10!2sAF1QipOYyIXDrLCjkswZ5At0o5wQHXCRsRNRUf57Gdh-&sa=X&ved=2ahUKEwi4nqDz15biAhVBX60KHW_tDkoQoiowD3oECA0QBg
|
|
|
|
Dennis LaGrua
|
MAY 15, 03:09 PM
|
|
| quote | Originally posted by phonedawgz:
I have a nice pick and pull yard next to my work. Lots of 4.9s sitting in there if you need me to get a clip.
[URL=http://www.google.com/maps/uv?hl=en&pb=!1s0x8803c705b97604f7%3A0xa0f2e5174f0d363d!2m22!2m2!1i80!2i80!3m1!2i20!16m16!1b1!2m2!1m1!1e1!2m2!1m1!1e3!2m2!1m1!1e5!2m2!1m1!1e4!2m2!1m1!1e6!3m1!7e115!4shttps%3A%2F%2Flh5.googleusercontent.com%2Fp%2FAF1QipOYyIXDr LCjks]http://www.google.com/maps/...2FAF1QipOYyIXDrLCjks[/URL] wZ5At0o5wQHXCRsRNRUf57Gdh-%3Dw284-h160-k-no!5sgibsons%20auto%20-%20Google%20Search!15sCAQ&imagekey=!1e10!2sAF1QipOYyIXDrLCjkswZ5At0o5wQHXCRsRNRUf57Gdh-&sa=X&ved=2ahUKEwi4nqDz15biAhVBX60KHW_tDkoQoiowD3oECA0QBg |
|
Wow that's some large pick and pull yard. Thanks for the kind gesture but if I have to bother you there would have to be a better reason.. I might as well head out to my local boneyard and solve the problem. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|