 
     |
| The Blue Car: A 3800/L67 how-to (VIDEO) build diary (Page 4/5) |
|
LostNotForgotton
|
JAN 23, 09:56 PM
|
|
This Video will go through the steps on removing the fuel tank, removing the sending unit and replacing the fuel pump. My Fiero is already up on stands and I am swapping in a bigger fuel pump for my 3800 swap. Check it out and let me know what other videos you'd like to see. Below are links to stock fuel pumps as well as the fuel pump I am using for my supercharged 3800 swap and a sending unit if you need them
3800 Fuel Pump
(V6) Sending Unit
https://www.fierostore.com/...px?s=60912&d=240&p=1
[This message has been edited by LostNotForgotton (edited 01-23-2019).]
|
|
|
|
LostNotForgotton
|
JAN 23, 09:57 PM
|
|
|
|
|
LostNotForgotton
|
JAN 23, 09:58 PM
|
|
In this video I attached the transmission shift cable arm and bracket as well as hooking up the SpinTech exhaust system. After that I FINALLY get the opportunity to do a pre-installation of the engine and test start it. Now that I know I have a good running engine I am ready to do the final hookups and finish up this project. Please check back soon for the LAST video in my 3800 install video series. The content seen in this video is for reference use only. Every engine/transmission will be unique in various ways. Please confirm the proper setup needed for your particular engine and transmission. I’m hoping to eventually be a one stop shop for most of your 3800 Installation and parts information. These 3800 installation videos will be broken down into different build segments so keep checking back for new videos.
Fix your Automatic Transmission Cable:
http://rodneydickman.com/ca...h=28&products_id=338
Exhaust Flange:
https://www.amazon.com/Fel-...61009+Exhaust+Flange
http://spintechmufflers.com/
|
|
|
|
LostNotForgotton
|
JAN 23, 10:00 PM
|
|
This is the final video in my 3800 build. This shows that everything done in my previous videos has gotten me a running and driving supercharged 3800 Fiero. If you need to have your PCM re-tuned you can get more information and contact Ryan Gick via e-mail at sp1@gmtuners.com or visit his website
www.gmtuners.com
------------------
87 Fiero GT 3.4 Pushrod with 7730 ECM & DIS
88 MERA #8013
85 Fiero SE with 3.1 pushrod
86 Fiero SE 2.8 stock
www.youtube.com/LostNotForgotton
 [This message has been edited by LostNotForgotton (edited 01-23-2019).]
|
|
|
cam-a-lot
|
JAN 30, 07:29 PM
|
|
Great work, well organized and helpful. Thank you for the time and effort you put into posting this info.
|
|
|
|
N3M3S1S
|
JAN 30, 09:29 PM
|
|
|
Man, I don't stop by much since I don't own my Formula(really getting the Fiero itch again though) but it's really cool to see another Delawarean kicking around. Chances are I've seen you scooting around in a Fiero or two. Going to have to go through and check out all your videos too! Just gave you a sub on YouTube.
|
|
|
|
Dennis LaGrua
|
FEB 06, 09:51 AM
|
|
This was an excellent thread and it was great that the OP decided to make some great videos and share his build with all of us. The only extra that might be beneficial is a separate video on another thread showing how to measure up for the custom CV axles that are often needed.
In this build he was able to use certain Fiero and GTP parts but on some builds, depending on the design of mounts used, it becomes necessary to measure up and have axles made. All and all still the best detailed 3800SC build video that I've seen. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|
sourmash
|
FEB 06, 08:16 PM
|
|
|
I agree. Thanks for the videos and details.
|
|
|
|
wgpierce
|
FEB 14, 11:02 PM
|
|
Thank you, we all watch your videos all the time. Great reference source! 
|
|
|
|
robert1234
|
FEB 17, 09:56 PM
|
|
I watch all your videos and view all your posts.....outstanding !!!
Thanks to all you do !
|
|
|
