 
     |
| My 88 Fiero GT 14k miles (Page 165/194) |
|
Justinbart
|
AUG 24, 03:09 PM
|
|
If you're really worried about it then get the Super clamp plate. The damage is already done and it doesn't appear to be leaking so as long as it's not out of balance you could just leave it.
What flywheel bolts are those? ------------------
Turbo 3800 E85 F23 5spd spec5
11.17@132.6
|
|
|
|
mattwa
|
AUG 24, 05:00 PM
|
|
I had that exact same interference problem with the 3800/F23 I built, same pressure plate. That is why I just used a stock 282 pressure plate so I didn't have to grind a section of the case for clearance.
Those flywheel looks like Grade 8 bolts, just like the ones Justin had snap on him. I would suggest ARP. 
|
|
|
|
BV MotorSports
|
AUG 24, 05:15 PM
|
|
This came out of my Whodumbass engine.
I do need to get some correct flywheel bolts. I couldn't believe I found hardware store bolts. As for the clutch, I cant say that I trust it. It didn't feel like it slipped when I drove it, but I never got to launch it either.
|
|
|
|
88lambofiero
|
AUG 24, 06:59 PM
|
|
|
That is whats holding my buddy's clutch to the flywheel and flywheel to motor. It worked great he beat the hell out of it but he blew the input shaft seal out. Now we need the pull the tranny. [This message has been edited by 88lambofiero (edited 08-24-2013).]
|
|
|
|
BV MotorSports
|
AUG 29, 10:59 PM
|
|
Engine & trans are back together and mounted on the cradle. Hopefully I'll get the damn thing running this weekend and then I am pretty sure I am going to put the stock wheels on it and list it on ebay. 
On a side note, angle cut Reactive exhaust tips are RAZOR sharp. I have a really bad cut on my right shin now.  Rolled tips for this guy from now on.
Oh yeah.. sorry about the pics.. first time I ever hit the 10gb monthly limit on photobucket. Normal service should resume on the 1st.[This message has been edited by BV MotorSports (edited 08-29-2013).]
|
|
|
|
nosrac
|
AUG 30, 03:23 PM
|
|
| quote | Originally posted by BV MotorSports:
Engine & trans are back together and mounted on the cradle. Hopefully I'll get the damn thing running this weekend and then I am pretty sure I am going to put the stock wheels on it and list it on ebay.
|
|
LoL..... I may do that too.
|
|
|
|
BV MotorSports
|
AUG 30, 04:22 PM
|
|
| quote | Originally posted by nosrac:
LoL..... I may do that too. |
|
LOL the wheels, not the car.
|
|
|
|
Formula
|
AUG 31, 11:24 AM
|
|
| quote | Originally posted by BV MotorSports:
Engine & trans are back together and mounted on the cradle. Hopefully I'll get the damn thing running this weekend and then I am pretty sure I am going to put the stock wheels on it and list it on ebay.
On a side note, angle cut Reactive exhaust tips are RAZOR sharp. I have a really bad cut on my right shin now. Rolled tips for this guy from now on.
Oh yeah.. sorry about the pics.. first time I ever hit the 10gb monthly limit on photobucket. Normal service should resume on the 1st.
|
|
the stock wheels are great for drag radials
|
|
|
|
BV MotorSports
|
AUG 31, 05:24 PM
|
|
| quote | Originally posted by Formula:
the stock wheels are great for drag radials
|
|
Exactly, I like the way you think.
Edit: drivetrain is back in the car. Too tired to button it up.[This message has been edited by BV MotorSports (edited 08-31-2013).]
|
|
|
|
BV MotorSports
|
SEP 01, 07:48 PM
|
|
|
|
