ok fiero owners myself and rob decided we are starting a used fiero parts store. we have MANY fieros here and buy all we can find. we are going to warehouse these parts and strip cars weekly. we will have a wide range of good used fiero parts at a good price. theirs 6 cars sitting here ready to strip and warehouse the parts. we will be selling all fiero parts from engines and trannys down to bolts.interior & exterior parts...right now we only have notchie body parts but are looking into a few fastbacks... let us help you with your fiero parts. we would be glad to earn your business. im a very reptical seller and person as you can see in my feedback here on pennocks and ebay. we will be accepting paypal , personal checks and money orders as forms of payment. please give us the chance to earn your fiero used parts business.. you can post the parts you need here or email me at my email address provided in my profile.we will respond asap to all .. thank you kindly ... gary m "86blackse"
[This message has been edited by 86blackse (edited 01-20-2008).]
IP: Logged
06:52 PM
PFF
System Bot
thismanyfieros Member
Posts: 3468 From: Red Deer, alberta,canada Registered: Dec 2002
i would love to get my hands on a fastback rear bumper.. but i know shipping to canada is a pain in the ass...let me know via pm what kind of price you are asking for that bumper...thanks tim
IP: Logged
07:06 PM
josef644 Member
Posts: 6939 From: Dickinson, Texas USA Registered: Nov 2006
(You might want to add a message to not post anymore requests there as it will not be checked any more. Otherwise you will have two threads to check and respond to several times a day. Just a thought.)
Gary or Rob, I want to price the rear half of a drivers side coolant pipe from 6" forward of the rear pipe mount to the thermostat hose connection. I can cut mine and splice it back on in front of the rear pipe mount. I don't want you to ship it to me Gary till I can pay you for it, around the end of the month. I can take a picture if you need one. Think it would be much easier to send , rather than trying to ship the whole pipe.
Mine was mashed almost closed up. I cut out the ruined section right at the drain plug. It now sags down at the back. It also pulls on the hose. It just looks bad. If I replace the section and make the splice between the two mounts it will not sag, as the mount will hold it up.
LMK
Thanks Joe Crawford Texas
[This message has been edited by josef644 (edited 01-18-2008).]
I need the pin with spring that goes in the GT style 3 prong steering wheel with center horn button. The pin activiates the horn when the button is pressed. The 4 prong SE style steering wheel with the paddles will not fit.
IP: Logged
04:31 AM
Daleford Member
Posts: 370 From: P E I - Canada Registered: Dec 2000
I need a pair of excellant tan sunvisors for a kitcar project. Hard to find good used ones. Possibly one of your cars has a pair that has been replaced recently????
IP: Logged
07:54 AM
86blackse Member
Posts: 1778 From: Ga-TN state line Registered: Nov 2006
I need the pin with spring that goes in the GT style 3 prong steering wheel with center horn button. The pin activiates the horn when the button is pressed. The 4 prong SE style steering wheel with the paddles will not fit.
pm sent
IP: Logged
08:57 AM
86blackse Member
Posts: 1778 From: Ga-TN state line Registered: Nov 2006
I need a pair of excellant tan sunvisors for a kitcar project. Hard to find good used ones. Possibly one of your cars has a pair that has been replaced recently????
i have a set of tan visors but they are not show quility, that will be a hard find on a parts car. i can get you a few pics of the ones i have if you'd like
IP: Logged
08:59 AM
White Spyder Member
Posts: 1047 From: Gluckstadt USA Registered: Sep 2007
100 miles noth of atlanta ga.. im trying to buy a 88 fastback now that has good tail lights and a red spoiler on it but it will be thursday before i can get over there to get it
As of right now we're down to just 84's and 86's notchbacks. But we do have connections with some other parts car owners that do own 87 fastback parts.
IP: Logged
06:18 PM
86blackse Member
Posts: 1778 From: Ga-TN state line Registered: Nov 2006
Gary or Rob, I want to price the rear half of a drivers side coolant pipe from 6" forward of the rear pipe mount to the thermostat hose connection. I can cut mine and splice it back on in front of the rear pipe mount. I don't want you to ship it to me Gary till I can pay you for it, around the end of the month. I can take a picture if you need one. Think it would be much easier to send , rather than trying to ship the whole pipe.
Mine was mashed almost closed up. I cut out the ruined section right at the drain plug. It now sags down at the back. It also pulls on the hose. It just looks bad. If I replace the section and make the splice between the two mounts it will not sag, as the mount will hold it up.
LMK
Thanks Joe Crawford Texas
A picture would be great to make sure I send you the right part.
IP: Logged
08:48 AM
josef644 Member
Posts: 6939 From: Dickinson, Texas USA Registered: Nov 2006
I will get you a picture first thing in the morning Rob. Mine says Formula on the doors, but it is just a plain Jane 4 cly base coupe. Joe Here ya go. You can see the sagging repair that is in behind the rear tube mounting, and the forward mounting up near the front wheel
Just measure about 6 inches in front of this mount and cut. It will be easy to cut of you remove both of the cooling tube mounts. The rear mounting is right there where the jacking location is. This way the mounting will keep the coolant tube raised. Thanks Shipped to 77364 Joe Crawford Texas
[This message has been edited by josef644 (edited 01-24-2008).]
IP: Logged
12:24 PM
Robs Fieros Member
Posts: 723 From: Athens, Tennessee Registered: Oct 2004
