Looking for a set of the Centerline wheels used on the Huffaker GTU / GT2 along with some Indy and widebody cars. Getting our GT2 restoration ready to test (have "other" race wheels), but looking for a "correct" set to use (at least) for display. Condition not critical (I have a good wheel shop). Let me know if you have a set / pair / etc.

Thank you!

The rims on the Huffaker GTU / GT2 are not the same bolt pattern as regular Fieros and they are much wider. I have a set that was actually used on a Huffaker race car
When I have time this weekend I will take a picture for you so you can see the diff

quote Originally posted by Quad GT: The fronts are 10.5x23.5x16(width/height/rim diam.) and the rears were 12.5x25.5x16 The bolt pattern is 5x4.5

Good information - thanks! I have the original part number, but no specs other than diameter and width. Yes, those are the tire sizes on the car. There were lots of variations done once people started building "clones". My car is a clone built off the full size plans and has some revised geometry in the front suspension. The car was a successful SCCA GT2 car regionally (and some nationals). This particular car currently is running 5x100 (rear) and 5x120 (front) mixed bolt pattern wheels. I am looking to modify this as time goes on and am just starting to gather parts.

Of course the follow up question is, "Are you interested in selling them?", and at what price?

Thanks!

[This message has been edited by Craig71188 (edited 04-11-2024).]