I am looking for replacement cylinder heads for my stock 86 SE fiero.

Unfortunately RockAuto doesn't sell them anymore.

Does anyone know where I could find a compatible one?

Much appreciated!

I can only find this cylinder head from AutoZone but just wanted confirmation from you guru's on fitment and any other thoughts yall might have on it

https://www.autozone.com/ex...head-2c85/992852_0_0

Thanks!!

are your rebuildable, if not are you local to tx as i have a couple of sets of used ones in good shape. Text if interested at 817 202 7258

quote Originally posted by wannav8: are your rebuildable, if not are you local to tx as i have a couple of sets of used ones in good shape. Text if interested at 817 202 7258

I am not local to texas and am not entirely sure they are rebuildable. Some of the holes that the exhaust manifold bolts into are broken, exposing the inner threads.

I would prefer to get something like I posted above from AutoZone if at all possible.

You and I have messaged before but I forgot, are you on the east coast or west coast?

East coast, North Carolina

It looks like these guys have one for $200. Cylinder Heads International

Make sure you get the big valve (high perf) heads. They all use the same couple of casting numbers, but some heads have bigger valves. (You want heads that came from an EFI 2.8, 3.1 or F-body 3.4.)
Most carb heads had smaller valves.

PM sent

I have a set here in upstate N.Y. ready to bolt on and go. $200 plus shipping. Can send pictures if interested.