Pennock's Fiero Forum
  The Mall
  88 suspension, misc, and 3800 parts

Post New Topic  Post A Reply
Email This Page to Someone! | Printable Version


next newest topic | next oldest topic
88 suspension, misc, and 3800 parts by Jay-ID
Started on: 04-18-2021 03:08 PM
Replies: 6 (283 views)
Last post by: Jay-ID on 05-06-2021 04:05 PM
Jay-ID
Member
Posts: 369
From: Boise, ID, USA
Registered: Dec 2001


Feedback score: (3)
Leave feedback

Rate this member

Report this Post04-18-2021 03:08 PM Click Here to See the Profile for Jay-IDClick Here to Email Jay-IDSend a Private Message to Jay-IDEdit/Delete MessageReply w/QuoteDirect Link to This Post
My 88 base coupe has gradually evolved into an autocross car with a 3800 SC, F23 transmission, and upgraded suspension. I have a lot of spare parts from this journey. I'm mainly looking to clear out space so I hope these prices are a deal. If not, please make an offer. Buyer to pay shipping charges as calculated by UPS (https://www.theupsstore.com/tools/estimate-shipping-cost) from zip 83709. The package dimensions and weights are below. I can take Paypal, Venmo, and CashApp. I'm not great about checking PMs so please email me at daehkcuf@hotmail.com

(SOLD) 88 rear sway bar with Fierostore end links. I added this to my car ~18 years ago and I assume it is from an 88 GT. Rubber is in decent shape on the frame brackets. The strut mounts are not included. $80 + shipping. Box would be 47"x16"x5" at 13 lbs.



Gen III Eaton M90 supercharger from Series II 3800 (L67) engines. Includes the throttle body and all sensors shown. I can separate the two if desired. The engine reportedly had 27,000 miles when I bought it. I added 2,000 more before pulling this supercharger. No slop in the bearings. The rotors look good with ~95% of their coating. Stock pulley. $80 + shipping. Box would be 24"x11"x9" at 39 lbs.




88 5-speed Isuzu shift and select cables. Taken off my car at 72,000 miles. Lubricated a couple years ago. In good shape. $70 + shipping. Box would be 20"x20"x5" at 4 lbs.



(SOLD) Alternator mount from Series II 3800 (L67) engines. Has one channel blocked off with a welded bolt for Fiero applications (reversible). $10 + shipping. Box would be 13"x8"x8" at 5 lbs. Picture below.

(SOLD) Power steering delete pulley for Series II 3800 (L67) engines. Required if you want to use the stock belt lengths. $5 + shipping. Box would be 6"x6"x6" at 2 lbs.


Coilover springs for the common rear DIY coilover conversion. The Summit Racing part number is SUM-102-5300 (newer part number is SUM-72-10-300). These are 300 lbs/in, 10" long, 2.5" inner diameter. I only used these for a couple years so they should perform as new. $45 + shipping. Box would be 11"x7"x7" at 5 lbs.


(SOLD) Stock 88 front springs from a base coupe. Taken off my car at 72,000 miles. These are 12.25" long with an outer diameter of 4.375". These have plenty of life left. $20 + shipping. Box would be 13"x9"x9" at 10 lbs.


Monroe shock absorbers (5821) for the front of an 88. The is the OESpectrum line. Only used for a year so nearly new. $20 + shipping. Box would be 17"x5"x5" at 4 lbs.


Used McLeod sintered iron clutch (larger 9 11/16 disc) and pressure plate. This is an odd one, but someone could get a great deal if you're willing to take a risk. I stopped using this clutch when my Isuzu ate 2nd gear. The clutch has about 2,000 miles. It never slipped on me but would chatter when taking off from a stop. The pressure plate (#24573141) has some heat patterns but isn't warped or grooved. The clutch friction material thickness is 0.30". This is meant for the Getrag 5-speed but will fit Isuzus with a little clearancing. $40 + shipping. Box would be 13"x13"x5" at 15 lbs.



[This message has been edited by Jay-ID (edited 04-20-2021).]

IP: Logged
PFF
System Bot
BassClefJeff
Member
Posts: 37
From: Salem, IN
Registered: Jul 2011


Feedback score: (3)
Leave feedback

Rate this member

Report this Post04-18-2021 07:57 PM Click Here to See the Profile for BassClefJeffSend a Private Message to BassClefJeffEdit/Delete MessageReply w/QuoteDirect Link to This Post
I'd like the front springs please. I'll PM my shipping info for total cost.

Jeff
IP: Logged
Spadesluck
Member
Posts: 1827
From: New Mexico
Registered: Jul 2016


Feedback score:    (6)
Leave feedback

Rate this member

Report this Post04-18-2021 09:37 PM Click Here to See the Profile for SpadesluckSend a Private Message to SpadesluckEdit/Delete MessageReply w/QuoteDirect Link to This Post
I will take that swaybar. PM sent
IP: Logged
Jay-ID
Member
Posts: 369
From: Boise, ID, USA
Registered: Dec 2001


Feedback score: (3)
Leave feedback

Rate this member

Report this Post04-18-2021 10:07 PM Click Here to See the Profile for Jay-IDClick Here to Email Jay-IDSend a Private Message to Jay-IDEdit/Delete MessageReply w/QuoteDirect Link to This Post
PM replied to. Post updated accordingly.
IP: Logged
Jay-ID
Member
Posts: 369
From: Boise, ID, USA
Registered: Dec 2001


Feedback score: (3)
Leave feedback

Rate this member

Report this Post04-20-2021 11:49 AM Click Here to See the Profile for Jay-IDClick Here to Email Jay-IDSend a Private Message to Jay-IDEdit/Delete MessageReply w/QuoteDirect Link to This Post
Sway bar and 88 springs have been shipped. Plenty more to sell so please ask if interested.
IP: Logged
BassClefJeff
Member
Posts: 37
From: Salem, IN
Registered: Jul 2011


Feedback score: (3)
Leave feedback

Rate this member

Report this Post04-27-2021 08:53 AM Click Here to See the Profile for BassClefJeffSend a Private Message to BassClefJeffEdit/Delete MessageReply w/QuoteDirect Link to This Post
Got the springs yesterday. Thanks Jay. Bump for you.
IP: Logged
Jay-ID
Member
Posts: 369
From: Boise, ID, USA
Registered: Dec 2001


Feedback score: (3)
Leave feedback

Rate this member

Report this Post05-06-2021 04:05 PM Click Here to See the Profile for Jay-IDClick Here to Email Jay-IDSend a Private Message to Jay-IDEdit/Delete MessageReply w/QuoteDirect Link to This Post
Bump. Prices are flexible so feel free to make an offer.
IP: Logged

next newest topic | next oldest topic

All times are ET (US)

Post New Topic  Post A Reply
Hop to:

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock