FOR SALE 1988 Fiero GT heavily modified
-Odometer mileage 142,512
-3.8L series II Super Charged Engine
-Magnecor R-100 10mm Pure Silicone Racing Wires
-Custom Ceramic Coated Headers (West Coast Fiero)
-Borla Stainless Steel Exhaust (sounds mean but is not too loud at all)
-High Flow Cat Converter
-Height Adjustable Rear Koni Coil-Over adjustable struts with 325# Springs (Held Motorsports)
-Height Adjustable Custom Front Carrera Coil-Over shocks with 7” 300# Springs (RCC specialties)
-wheel bearings on all 4 wheels (Rodney Dickman)
-Upper and Lower Ball Joints
-rack and pinion bushing and bearing (Rodney Dickman)
-All New Steering tie Rods (inner and outer)
-Professional Powder coating of all suspension components, roll bars, engine cradle, and front brakes
-Complete Urethane Bushings of all suspension Components and transmission mounts
(rubber engine mount used to help reduce vibration rather than all urethane)
-Transmission Bearings, Inside and Out
-Phantom Grip Limited Slip Differential (works great- much better grip from both tires- unlike stock)
-Cold Air Intake with K&N Air Filter
-Stock Corvette Fuel Pump
-Stainless Steel Braided Brake Lines (Fiero Store)
-Custom Engine Bay Heat Shielding
-Complete Dynamat under carpet of drivers side compartment and door
-GT-One Honda NSX headlights
-IMSA front wide body Kit
-Mad Curls rear wide body Kit
-Axis Matrix wheels
Rear: 20x10.5/+35mm offset, 5x114.3 BP. (Nissan 350Z)
-Wheel Spacers (pair for rear wheels and made in USA)
6061-T6 Aluminum Alloy Construction
3/4" (19.05mm) thick.
5x100/57.1mm center to 5x114.3/73.1 mm center.
Hubcentric on both sides.
-Toyo T1-R tires
-5 Speed Getrag Transmission
-Mazda RX8 mirrors
-C4 Rotor Adapters (on all four wheels)
for OEM Fiero calipers
-Corvette C4 Slotted rotors
-Leather MOMO Competizione steering wheel w/ NRG quick release hub
-Front battery relocation tray
-Car is running.
-AC need recharge.
-Alternator, belt and pulley needs to be replaced.
- Much more not listed. More information and build thread:http://centralfloridafieros...ch6kvnrsu1&topic=3.0
Asking $17,500 (USD) OBO or will accept Bitcoin (BTC) too. Any question please PM.
Car located in Alachua, FL (North Gainesville)
I live out of state. Fiero is stored at a family members garage. I will ask someone take pictures (and/or video) this week. Build status: exterior body is over 95% complete and in primer. I've spent over $40k on this project and don't have the time or interest to complete the project. She needs to go to a good home. This project was worked by v8 Archie (shop), Whodeanies (shop) and Blacktree (PFF member).
Added rear wheel spacer info & Front battery relocation tray to list.
Added 5 Speed Getrag Transmission to list.
Added: Vin # and odometer mileage
pics not displaying.
Changed postimg.org to postimag.cc.
[This message has been edited by FierociousGT (edited 04-13-2018).]