These brackets allow the use of 88-95 C4 12" rotors and 88 Fiero calipers on your 84-87 fiero. You will need 16" wheels at the min but I have heard of people getting the stock 15" wheel over them on 88's. People have been doing this swap on 88's for years, it is very well balanced, lightweight and affordable. Using the 88 Fiero caliper allows you to have an e-brake, nothing needs to be done to the cables or the calipers. The fronts are a bolt on and will require a hub made to install the new rotor onto. I have these available here-https://www.fiero.nl/forum/Forum4/HTML/071647.html When you install the rear calipers you will need to swap sides, Driverside on the pass side and pass side on the driverside. This will put the bleeder facing down requiring you to bleed the calipers off the car, I have done it several times and it isn't hard to do. Also the Threaded holes that hold the bracket to the knuckle will need to be drilled out and tapped with a M12x1.75 tap, I will include the required drill bit and Tap with each set of brackets.

All parts are available from Rockauto-

Front parts-

Power Stop drilled and slotted rotors, AR8240XPR $44.79ea
ACDelco 1988 Fiero left front caliper, 18FR722 $39.79 ea. That includes the $8.00 core
ACDelco 1988 Fiero Right front caliper, 18FR721 $39.79 ea. That includes the $8.00 core

REAR parts-

Power Stop Drilled and slotted rotors, AR8241XPR $41.79 ea
Centric1988 Fiero Left Rear caliper, w/ all brackets and hardware- 14162533 $126.79ea That includes the $70 core
Centric1988 Fiero Right Rear caliper, w/ all brackets and hardware- 14162534 $126.79ea That includes the $70 core

Front brackets-

$95 Shipped will get you 2 front brackets, milled from 7075 Aluminum and powder coated black, 2-6061 Aluminum rotor centering rings and the required bolts to mount the brackets to the knuckle.

Rear brackets-

$140 shipped will get you 2 rear brackets, milled from 7075 Aluminum and powder coated black, 2-6061 aluminum rotor centering rings, the required M12x1.75 mounting bolts and the Drill and M12x1.75mm tap. You can knock $10 off that price if you don't need the drill and tap.

$210shipped if you buy both a front and rear set together.

PayPal for a set of rear? No tap or drill needed

quote Originally posted by topcat: PayPal for a set of rear? No tap or drill needed

PM sent with paypal info

Paypal sent.

Thanks

Paypal sent for a set of 2 rear brackets, 2-6061 aluminum rotor centering rings, the required M12x1.75 mounting bolts and the Drill and M12x1.75mm tap.

Regards,

Freeman

How much to ship the lot to me i'm in 2074 NSW Australia.

quote Originally posted by Australian: How much to ship the lot to me i'm in 2074 NSW Australia.

I will get you a quote and PM you at total.

My brackets came in yesterday. They look great, and I am looking forward to the install. Next weekend is my weekend off, so I will work on them then.

Thanks again!

I need a set of front, rear, and a set of hubs.

Regards,

Freeman

Payment sent.

Parts received, thanks!

I would like both fromt and rear plus a pair of hubs.

Rolland

quote Originally posted by 87convert: I would like both fromt and rear plus a pair of hubs. Rolland

I sent you a pm regarding this.

Parts received. Feedback left.

Paypal payment sent. Looking forward to these parts since the 88 parts you sent in June worked great.

Thanks;
Rolland

Pm sent re: cost to ship a front set north of the border.

Any redrilling of the rotor necessary to fit the lug pattern?

PM Sent.

Lord. Yes you have to drill the fiero pattern into the rotors. A drill press, plus old rear hub with studs removed will do the job.

Mine just arrived. They look great! Thanks

is this a better upgrade than the lebaron rotor, s10 truck caliper swap???

if so put me down for a front set will get rears when I do my swap.

Pm'd

Pm sent

pm sent to you.....

quote Originally posted by 90turbo1: pm sent to you.....

I replied to your PM.

parts received! thanks!

i need a front and rear set with front rotor hubs. please contact. ty...

PM sent.

Would this setup fit over Cheviot 15 inch dia wheels of 7 inch and 8 inch width?

Thanks

SLUPPY ROCKS, GREAT BRACKETS AND THE GUY REALLY HAS IT DOWN GOOD FOR A WONDERFUL BRAKE SYSTEM. THANK YOU SO MUCH. HE'S YOUR MAN FOR THE UPGRADE !!!!!!!

PM'd

PM'd.

PM'd

Are you the same guy that was making the short hood struts that mount beside the headlights?

PM'd

Is there any chance you are still selling these in 2022? I need some!

quote Originally posted by 86GT405: Is there any chance you are still selling these in 2022? I need some!

?

These are still available for purchase. I don't stock them but machine them as purchased.

I would be interested in brackets and hubs. Sent you a PM.

Are these still available, front and rear?