I need to buy a hood release cable. what happened is this, I opened the hood one day and when I went to close it it would not latch, when I looked at the handle the plastic containing both cables was broken and the cables were showing. I checked the actual latch and it was fine no blockage and it moved back and forth fine but, the handle had no pullback pressure on it anymore. The hood does latch if i push the cables manually back far enough and if i pull on the cable it does release the hood but not if i pull on the handle. I was told to find and replace the entire hood release cables and their plastic encasing. If i should be doing something else please anyone that knows feel free to enlighten me.