With express permission of Darth Fiero (Ryan Gick) and Gwain (Marc J. Fisher) the Georgia Fiero Club is proud to offer a Digital EGR Adapter Kit for use on the stock Fiero V6 “Y” pipe EGR flange. The EGR Adapter is being produced from Darth Fiero’s design. The kit includes necessary gaskets and bolts to mount the Digital EGR Valve to the Adapter Plate. You must reuse your original EGR nuts to attach the adapter plate to the stock EGR flange.
The Digital EGR Valve is a popular and beneficial modification when converting to the 7730 ECM for use on the Fiero 2.8 or 3.4 V6 engines.
You may place your order through the Georgia Fiero Club website in the Club Merchandise section. PayPal, personal check, or postal money order is accepted. The kits are priced at $65.00, USD and includes USPS Flat Rate shipping to any of the 50 United States.
Prices slightly higher for outside Continental US orders. Those orders will be shipped by special arrangement, only. Contact us at GeorgiaFieroClub(at)Gmail(dot)com subject: “EGR Adapter Plate Kit” for arrangements International Rates or to arrange for payment by Personal Check or Postal Money Order.
The initial run was 12 units. I think 6 are already spoken for. We may have more made if the demand is high.
[This message has been edited by TopNotch (edited 05-15-2020).]
This is sold as a kit only. We have provided the necessary gaskets and bolts to install the digital EGR valve to your stock Fiero EGR valve and tube base. The new gaskets are provided to assure a good seal between all mating surfaces. Thank you all for being so patient.
------------------ Two yeast spent their entire life "about 2 days" discussing what the purpose of life could be and not once did they even come close to the fact that they were making champagne. Quoted by: Unknown
We still have a few left. We're considering a second run, but there may be a short delay between the last of the current run and the first of the next run. If you expect to need one to get your conversion back on the road, please place your order. The faster these go, the quicker we will start new production.
There have been questions about the 7730 conversion passing California emissions. I have received information that vehicles with this conversion have passed without problems.
Chris, we just sold the last 3 but will be discussing another production run at our business meeting this Saturday. If anyone would like to pre-pay and reserve one for a planned conversion, go to the links above on the Georgia Fiero Club website.
Thanks, for placing the order. The instructions we provide inside the kit are for mounting the Adapter Plate to the Fiero Crossover Pipe and the Digital EGR Valve to the Adapter Plate. Bolts and Gaskets are provided for that purpose. You must reuse the original nuts that held the Vacuum EGR valve to the crossover pipe flange.
Conversion pinouts and wiring instructions for the 7730 ECM and Digital EGR Valve can probably be obtained from the Sinister Performance website, aka DarthFiero. Darth can also program your 7730 to accommodate the specifics of your engine. He can also build your harness if needed. Phonedawgz is another source of harnesses.
Georgia Fieros has a cross reference chart of vehicles equipped with a compatible Digital EGR Valve. It can be found in the Message Board > New Forum > The Market > Digital EGR Adapter Plate Kits.
Of course, if you have any questions, please email us at GeorgiaFieroClub@Gmail.Com We will try to answer your questions, or direct you to someone we feel can help.
Thanks everyone. This production run disappeared in a week's time. We only have one left. If there's enough current demand, we'll make another run. You can place an advance order and we should be able to ship to you within a week. No less than 2 weeks. We will also have some available at the Daytona show.