The good news is, that it's $20,000 in Canadian funds. Works out to about $14,333 in US dollars.

The bad news is, just about everything else.

quote Kit car , Not completely finished, running and running 🏃‍♂️stops and drives.

Needs just a bit of work. I suspect the fella believes this project is worth a tad more than it really is.

No, I'm not going to provide a link to this ad. It's from Facebook Marketplace, and I don't want the guy identified and harassed.

Knock yourself out.

I'm not the type to beat up people for stuff that they post for sale. I just quietly keep scrolling, unless it's an obvious scam.

I'm guessing the hardest part is going to be finding / obtaining glass that will fit those windows. The back window is probably no problem... just a flat panel... but the doors and windshield... I wouldn't even know where to start.

quote Originally posted by Raydar: I'm not the type to beat up people for stuff that they post for sale.

Oh come on Raydar, I'm hardly beating the guy up here. I was just rather surprised that someone would describe their project vehicle as "not completely finished" when it's no where even near being completed... and yet, still asking a premium dollar for it. And with this kit car being based on a Fiero chassis, I thought people here at a Fiero forum might possibly have some interest in the photos from the ad.

If I truly wanted to beat on someone, I'd return to P&R and express a few opinions.

To be honest, there is no way to finish that kit. It looks like his Fiero is stretched but he bought a standard non-stretch body kit.

quote Originally posted by IMSA GT: It looks like his Fiero is stretched but he bought a standard non-stretch body kit.

I suspect it's this photo that's given rise to your observation. Is there a chance that it's simply the angle the photo was taken at (with a deeply recessed wheel/tire) that makes it look like the front wheel/tire possibly isn't centered in the wheel well?

quote Originally posted by Patrick: I suspect it's this photo that's given rise to your observation. Is there a chance that it's simply the angle the photo was taken at (with a deeply recessed wheel/tire) that makes it look like the front wheel/tire possibly isn't centered in the wheel well?

It's possible. Now that I look at it, that's not the right front end for a Countach kit. That looks like a Diablo front end. What a mixed up kit.

Looks like a failed project that IMO is not worth much. I'd be very surprised if this un-assembled kit vehicle sells .The seller has every right to ask what he wants but I think he's way off on this one.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

[This message has been edited by Dennis LaGrua (edited 05-24-2025).]

quote Originally posted by Dennis LaGrua: I'd be very surprised if this un-assembled kit vehicle sells.

Especially at the price he's asking. It's been listed for (at least)16 weeks so far.

I liked his vision.