I have read a lot of posts on here about lambo doors and I am still wanting to know if anyone knows who sells a set that is bolt on without any welding or cutting.I can do basic stuff and could do this if is not to detailed.If anyone could point me in the right direction it would be greatly appreciated. Thanks
I'm in a great mood tonight. ...and this was the perfect thread to mention it.
A few weeks ago, I won a "used" set of Autoloc Lambo hinges on eBay for $26 (sorry if anyone here was bidding ). It was supposed to be just the used hinges, with no hardware or instructions. Just got them today and they must have sent the wrong box. The set they sent is brand new, and everything is there; all hardware including shocks! This kit normally retails for more than $1000...
I'm in a great mood tonight. ...and this was the perfect thread to mention it.
A few weeks ago, I won a "used" set of Autoloc Lambo hinges on eBay for $26 (sorry if anyone here was bidding ). It was supposed to be just the used hinges, with no hardware or instructions. Just got them today and they must have sent the wrong box. The set they sent is brand new, and everything is there; all hardware including shocks! This kit normally retails for more than $1000...
Can you post pics here .. would like to see if they can be modded for a fiero regards Danyel
I think they should work for a Fiero since they have the smaller footprint at the frame. My installation is completely custom so not really an issue for me...it'll get welded on one way or another.
A little word of advice..... before you start the install ... I chose to do mine and this is what I have to live with. regards and good luck on the install Danyel
Wow, Haven't looked at that video in a long time. As painful as the video is to watch, it's no where nears as painful as trying to fix it.
Archie
quote
Originally posted by Danyel:
A little word of advice..... before you start the install ... I chose to do mine and this is what I have to live with. regards and good luck on the install Danyel
[This message has been edited by Archie (edited 09-17-2015).]
Since mine is for a Lamborghini replica...it's kinda required One difference with my setup though. They will only be moving up and down, not out first and then up. This makes for a more solid setup.