I'm making a repair kit for those that have broken off a screw or two for the side covers on the 87/88 headlight actuators. I've had this idea for more than a few years now. Finally getting around to making them. I'll have some made this next week. If anyone wants to try one N/C for R&D let me know. You will need to have the headlight actuator out of the car.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
All new web page!:www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

I have one that's broken, but I have no idea how to fix it, I could send it to you for R&D

Is this the 3 side screws? If so, I'd like to replace mine. I'd also like to replace the 2 screws that hold the motor on.

Rodney, I have a couple under the bench that could use this if you still need a tester.

I made a couple prototypes. Working on getting some made:

http://rodneydickman.com/ca...h=32&products_id=359

Might take a few three weeks.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
All new web page!:www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575