This is the V8 setup that I put in my Lambo Diablo Roadster when I built it. The engine casting number is 14093638, factory roller cam, one piece oil pan gasket. This engine I got new as a crate engine and it has less than 2500 total miles on it. Comes with chrome electric water pump, polished Hurricane intake, Holley 670 vac secondarys, ect. Runs GREAT! Other than the intake and carb the engine is factory/crate stock. It has chrome valve covers, oil pan, timing chain cover but are not pretty. This drivetrain has been sitting in my garage for 7 months collecting dust so it does need a good cleaning. The only thing that Im aware of that this engine needs is- It had a very small oil leak on the remote oil filter adapter (almost all of them do at one point) just needs to taken off, cleaned and resealed.
Complete V8 Archie kit, not sure if I still have the A/C mount. The Isuzu transmission that is on there now only has about 700 miles on it since I installed it after the Getrag went out. I works/shifts great. Comes with axles, shifter, cables plus alot of extras...
Im including everything that went with this drivetrain. I pulled this sbc drivetrain out and replaced it with a LS4 drivetrain so what ever that went with the sbc is included. For example- Fuel pump, after market regulator, oil cooler, custom headers, motor mounts, remote oil filter, starter,ect - No alternator is included. You might only need a few nuts and bolts, hose clamps, ect to have everything you need to install this on your cradle. Im not sure if the headers will fit a normal Fiero since they were fitted for my Diablo, I do know that the A/C compressor wouldnt fit in the factory spot with these headers. But they are included if you want as they are still connected. I will also include the 3" exhaust system (minus tips) but again I dont know how it will fit a stock Fiero.
My garage could easily be on one of those hoarder shows on tv, I got to get it cleaned out. Hence the super low price for this complete drivetrain. The engine is located in Austin Texas, pick up is prefered. I will work with a shipper but you will be responcable for crating expenses. I might be interested in trades but the trade value would have to be worth more than $950.00 cash, No junk, I have plently...... Any questions or interest just PM me.....
My garage could easily be on one of those hoarder shows on tv, I got to get it cleaned out. Hence the super low price for this complete drivetrain. The engine is located in Austin Texas, pick up is prefered. I will work with a shipper but you will be responcable for crating expenses. I might be interested in trades but the trade value would have to be worth more than $950.00 cash, No junk, I have plently...... Any questions or interest just PM me.....
IP: Logged
11:06 PM
Aug 3rd, 2013
gtxbullet Member
Posts: 4181 From: Pewaukee, Wisconsin, USA Registered: Apr 2008
