Here are parts that are seldom requested but I would like to buy them. If the car is an automatic , I would like to buy both the trans cooling lines to the radiator with the hangars. I also need the heater return hose (metal line) that runs to the heater core , and the line hangars but not sure if these will fit my 87GT. As you are close by I can pick up .Let me know
------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Flotech Afterburner Exhaust, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
IP: Logged
06:42 PM
NightMare Cruiser Member
Posts: 2036 From: Edison, NJ USA Registered: Aug 2009
Here are parts that are seldom requested but I would like to buy them. If the car is an automatic , I would like to buy both the trans cooling lines to the radiator with the hangars. I also need the heater return hose (metal line) that runs to the heater core , and the line hangars but not sure if these will fit my 87GT. As you are close by I can pick up .Let me know
No gas tube/ pipes. Not sure what the trans lines look like. Pictures would help me. I have all the wire harness's front fenders, most inreior pieces light grey,
IP: Logged
06:47 PM
Donster Member
Posts: 437 From: Weinheim, Germany Registered: Jan 2011
Anyone who wants to pick up a Starter or Altenator. FREE!! Just found these two. Here in NJ 08837 Edison. Before they get dropped off at Pep Boys, I rather give them away to somebody for a spare.
IP: Logged
06:28 AM
NightMare Cruiser Member
Posts: 2036 From: Edison, NJ USA Registered: Aug 2009
Here are parts that are seldom requested but I would like to buy them. If the car is an automatic , I would like to buy both the trans cooling lines to the radiator with the hangars. I also need the heater return hose (metal line) that runs to the heater core , and the line hangars but not sure if these will fit my 87GT. As you are close by I can pick up .Let me know
Make a offer. Able to meet and sell on Sunday.
IP: Logged
02:18 AM
NightMare Cruiser Member
Posts: 2036 From: Edison, NJ USA Registered: Aug 2009
Parts I dug out today. I realizeFiero parts are widely availble on here. I rather have these picked up then send, Heavy or bulky: All out of a 1985 6cyl: Altenator $? A/C compressor with hoses $? Starter$? Engine fan $? Air filter canister no rust $?
Trans lines $? heater pipes $?
coolant pipes $? A/c condesor and pipes $?
Wiper motor $? rear light wire harness $? Front compartment Wire Harness $? Door lock openers (both sides) $? Smooth trim see pic $?
As with everyone else I'm trying to raise cash for my current project (3800 sc swap) please no low balling.
IP: Logged
02:52 AM
Apr 23rd, 2012
John Miller Member
Posts: 344 From: Freemansburg,Pa USA Registered: Dec 2002
The second is a 2002 Regal SC engine. It has a spun bearing. I will be taking it out of my car as soon as I get my replacement engine. The engine will be missing the SUPERCHARGER, acc's, wires, oil pan gasket ( i just bought it 200 miles ago, they run about $45). It will need these parts plus either machined crank or a new crank. engine is said to have 70k on it
IP: Logged
07:58 AM
Jan 12th, 2014
NightMare Cruiser Member
Posts: 2036 From: Edison, NJ USA Registered: Aug 2009
Do you have to exhaust pipe section for an 85 GT v6 the piece that goes from the coat to the muffler inlet? Thanks, pm me if you have this please, Louis
------------------ Louis Duet Baldwin, Long Island, NY "Blue" <= '85 GT "Gettin' There"
IP: Logged
07:18 AM
Lou and Blue Member
Posts: 1349 From: Baldwin,NY,USA Registered: Dec 2013
How much are you aking for the '85 notchback drivers side tailight? Can you post pics as well? Interested as mine is cracked badly. I'm in Baldwin on Long Island. Thanks!
------------------ Louis Duet Baldwin, Long Island, NY "Blue" <= '85 GT "Gettin' There"
IP: Logged
07:26 AM
NightMare Cruiser Member
Posts: 2036 From: Edison, NJ USA Registered: Aug 2009
Do you have to exhaust pipe section for an 85 GT v6 the piece that goes from the coat to the muffler inlet? Thanks, pm me if you have this please, Louis
Sorry gone.
IP: Logged
10:48 AM
NightMare Cruiser Member
Posts: 2036 From: Edison, NJ USA Registered: Aug 2009
How much are you aking for the '85 notchback drivers side tailight? Can you post pics as well? Interested as mine is cracked badly. I'm in Baldwin on Long Island. Thanks!
I will get pictures later on today. PM me your email address.
