PM replied

Steve

anybody else need anything?

Steve

I'm looking to convert my 88 formula front end to the gt aero style nose so I am looking for a few parts that I will need to convert it.

Along the lines of front GT inner wheel liners,GT lower air dam,GT absorber under bumper cover,GT front marker lights,inner GT brackets and trim.

I figure the SE/GT parts are pretty much the same, not positive though. If anyone has any input feel free to speak up!

Need a few things for my '86.
Right door mirror, no power.
Bracket that holds the little light under the front hood. Have light & wiring, need bracket & screws.
Bolt that holds the jack to the jack bracket.
Driver's side seat hinge cover (grey?)
Passenger side windshield washer squirter nozzle & bracket (missing, so might be all one piece, don't know)
Hood release cable.
Let me know what you have and price shipped to ZIP 26041
Thanks,
Greg
mbjeeper@aol.com

I don't know if the wheel well liners are the same? The lower air dam I will have to check. The bumper cover absorber is still on the car and don't know how good it is. Side markers are sold. What do you mean by inner gt brackets and trim?

Steve

quote Originally posted by 1988holleyformula: I'm looking to convert my 88 formula front end to the gt aero style nose so I am looking for a few parts that I will need to convert it. Along the lines of front GT inner wheel liners,GT lower air dam,GT absorber under bumper cover,GT front marker lights,inner GT brackets and trim. I figure the SE/GT parts are pretty much the same, not positive though. If anyone has any input feel free to speak up!

I need the rear upper Aero ground effects piece for both sides. It's the piece just above the rocker just in front of the rear wheel. For a picture of it please look at this this thread. https://www.fiero.nl/forum/Forum4/HTML/050025.html. Also looking for the right side cover for for T-top. It's the panel right behind the T-top and covers the T-top channel. About 14" or so long and about 2" wide. Any help would be appreciated. I need price shipped to Saskatoon, Saskatchewan, Canada.

------------------

87 GT w/T-Tops
If you like what I am contributing, please vote.

im in need of a stock set of injectors on the rail how much to ky 40740
thanks kris

quote Originally posted by 86soon3.4: Have everything but the seat hinge cover. Will make sure of the rest for sure. Steve

OK, let me know what you want for it. Hopefully we can make a deal
You can email me the total at the address below.
Thanks,
Greg
mbjeeper#@aol.com

mbjeeper PM sent.

Steve

I could use the 4-speed trans but you are all the way up past Green Bay. Any chance of you heading down to southern WI anytime?

jefrysuko, I hadn't planned on going south, I could meet you half way. The tranny is still in the car in a snow bank and no way to move it. Do you have time to wait for removal?

Steve

quote Originally posted by Jefrysuko: I could use the 4-speed trans but you are all the way up past Green Bay. Any chance of you heading down to southern WI anytime?

quote Originally posted by 86soon3.4: jefrysuko, I hadn't planned on going south, I could meet you half way. The tranny is still in the car in a snow bank and no way to move it. Do you have time to wait for removal? Steve

Yep, I have plenty of time. It could even wait till an event like the Fierorama if you go to that. It would just be to have as a spare.

What would you want money wise and how many miles are on it?

The 4-speed tranny is in a car I never drove. The engine is tore apart and the car is being scrapped. I cannot guarantee it is any good. The PO said he bought the car from a guy that drove it daily till it spun a rod bearing. That was 4 years ago...

Steve

I'm looking for a spare (clutch slave cylinder "BRACKET ONLY") from the 4 speed Fiero. Check real good for cracks.
My offer $12.00 plus shipping. Willing to dicker a little on price but wont bend over. Zip 19320.

PM me with your payment info. Thanks.

Spoon

------------------
Two yeast spent their entire life "about 2 days" discussing what the purpose of life could be and not once did they even come close to the fact that they were making champagne. Quoted by: Unknown

parts sent and pm's replied

Steve

Hello, I'm looking for both a driver and passenger door, metal frame structure only. I don't need or want anything but the metal frame, and I only really need the top quarter of each door. Let me know if you can help me out and how much if you have them available. thanks, chris

to the top


Steve

How many miles are on that 4 speed?

Tan non sunroof headliner. Not broken. $20.00 pick up only



Passenger side door panel. $10.00 plus shipping


Driver and passenger visors. $20.00 shipped



Notchy clip. Center hole tore out. Gas tank filler bolt hole tore. make offer. Pick up only




86 red notch engine cover. make offer. pick up only


86 notchy nose moulding $5.00 plus shipping



Aux gauge cover $5.00 plus shipping



I have more stuff. Let me know what you need?

Steve

bump

PM Sent

pm replied

Steve

Front drivers inner fender? And I might snag the visors...o, and do you have a solid center console? The part behind the switches. I'm sure I'll think of more little bits

TommyRocker, I have a drivers inner fender, I will have to see what shape it's in.

What do you mean by a solid center console? This? C-pic


Steve

Sorry...I meant the armrest part of the console thingy, shoulda just said that, wasn't thinkin. I see a pic of it on page one but I'm on my phone so its too small to tell if its ripped. Btw, where are you located?

do ya have a gray center console..the part that is under the shifter. the square soft vinyl part. mine is warped really bad. need it for a 88gt. i can paint it if need be..

Do you happen to have a four speed shifter surround bezel and ash tray unit, I basically need everything that goes around the shifter and down to the tranny tunnel for my car as mine is in bad shape. I am also interested in the aux guage bezel. I am at 37803.... Thanks and peace oh yeah mine is grey and black...

Rocker~The tan one I have the vinyl is pulling off of it and the glove box door. 15 min north of Green Bay.

Winger~no gray center console.

Pete~I may have the surround, don't remember the condition.


Steve

Would you be willing to ship the silver drivers side outer door skin to Iowa?

[This message has been edited by JLCustomizing (edited 03-23-2010).]

I need one of the short 10mm 12-point bolts from the top of the plenum. These are the ones that hold the throttle cable bracket to the plenum. I only need one but I'd take both if you could part with them (just in case). $1 a piece plus shipping and PayPal?

Jonathan

I need a v6 oil pan (I have an 86 4-speed if it makes any difference).

Shipping to 47201

Thanks!

if the door hinges are the same as an 87 GT i need the drivers side. LMK and shipping to 07980.

Thanks
Ryan

PM sent.

BUMP

Got any of the round smooth front marker lights left? I need drivers and passengers sides. Thanks

pm sent

PM sent!

Thanks!

pm replied

Steve