Yep,time has come...with a heavy heart what must be done is getting done. Its like pulling the drain plug..I'm shipping stuff as fast as my little hands can go...The white 3.4 was cut up and sold off in pieces. A nice guy in Mass bought the drivetrain.
drepinpk...I have lots of pieces...What do you need??
IP: Logged
01:00 PM
Brint Member
Posts: 175 From: Manchester MO USA Registered: May 2006
Any chance you have an intact rear bumper for an 88 coupe? Color makes no difference... the car needs paint anyway.
Also, not a major need, but do you have any intact console skeletons?
Thanks alot man!!!
------------------ Petty Officer Michael C Casaceli Aircraft Electronics Technician Second Class AIMD Brunswick (2007-present) Patrol Squadron Ten (2003-2007) United States Navy
[This message has been edited by fieroturbo (edited 06-25-2009).]
I am looking for a set of the copper benzel as well as silver set both must be in great condition or close to it and a 88 Engine Cradle
Thanks Tim
***also need a tan driver's side door panel (power) as well as 2 tan map pockets***
Hello Mark,
1. Is price you gave me for the copper and silver face plates. Is that for all three pieces? 2. Sorry for the mix-up I am looking for a beachwood driver side door panel (power) and two beachwood map pockets. 3. As far as the the cradle, can I get a pricture and price on shipping and that will be a go. 4. I also need a pair of 88 vent brackets
Thanks Tim
[This message has been edited by BMTFIERO (edited 06-28-2009).]
IP: Logged
10:55 AM
josef644 Member
Posts: 6939 From: Dickinson, Texas USA Registered: Nov 2006
Looking for a three spoke tan steering wheel, not a GT wheel with the slimmy mushy leather. Horn button and springy thingie thing for the horn also. I can put a Wheelskin on it if the surface coloring is thin and worn. Shipping to 77364. I have a PayPal account. This is the gray one in my 86 Coupe I am looking for in Tan. Thanks Joe Crawford
Windshield surround/roof piece w/ Sunroof cutout. Not sure if these are different between models, so it's for an 86 fastback GT. Preferably in white, if you have it. Price + Shipping to 33764.
IP: Logged
04:30 PM
Fierosmith Member
Posts: 568 From: East Texas, USA Registered: Jun 2007
Looking for a shifter phase plate for a auto from a 84 to gray in great condition . if happen to have ashtrays door is ok but if not its alright also .Thats if happen to ship in Canada
Thx Rob
[This message has been edited by Newbfiero (edited 07-05-2009).]
IP: Logged
07:44 AM
IVANNATINKLE Member
Posts: 913 From: Kansas United states Registered: Jun 2009
Hey guys/gals. Been away for the Fourth..I will catch up with all later,and get out the few stray packages that are waiting. Thank you so much to everyone so far. I'm glad to be able to help all with our fun cars.
