is that the housing, cap, and thermostat? and if so are they all good non-leaking parts? Also how much to 43611?

if the therma. is still in the car you can have it also,, no leaking at all... 20.00 shipped sound ok?

yeah sounds great. PM me where to send the money

pm sent

bump on my parts,, i still have tons of parts, if you dont see what you need in the pics, pm me i probaly got what you need

PM sent we'll discuss pics being needed or not ... i'll take your word for their quality.

Hey 86blackse, I've been pm'in you but I'm not sure that they are going through. PM me to see about payment. Thanks,
Mike.

pm returned to all,, sorry about that i been sick..

PM sent

pm sent

how much for the deck vent grates shipped?

how about 20.00 shipped

Are they GT style or the old 84 style? I see both on your photos. If they are the GT style I'll take them.

[This message has been edited by timgray (edited 08-24-2007).]

their solid top ones off the 84.. rob might have a set he will sale off a gt... how bout it rob?

I'm looking for the console trim that surrounds the shifter.

My interior is Gray. The photo below shows the part I need. Would like to find one not warped.


(Photo is not from my car, but this is the part I need.)

I still need some directions. Thanks, Scott

Do you have good light gray sun visors?

pm sent

scotty,, im out of town for a few days, i'll call you when i get home

All I have are the vents for an SE.

Still looking for a 88 rack.

joe, your part is own its way to you

spanky, your part has been shipped

mr pbody,,,im waiting on a address to ship
anne....no 88 parts left, sorry

[This message has been edited by 86blackse (edited 08-27-2007).]

quote Originally posted by 86blackse: NEED ANY PARTS ,,,I PROBALY GOT WHAT YOU NEED,, if you dont see it ask me i got it 100's off parts, if you dont see what you need in the pics ask im sure we have what your looking for, just went and pulled a truck load of parts today,, get them while their here

Would you have a passenger side GT quarter window or a driver's side GT taillight lens?
Thanks.

sure dont those parts go fast

all parts shipped yesterday,, you guys should get it this week.. thanks for your biz..

Would you happen to have a working Fuel sending unit that would work in an 85 2m4?

do you have a 1 1/2" rubber fuel fill hose at the fuel tank (86 v6)? also i need a thermostat housing for a v6 engine. thanks

Can I get a Bracket, that goes to the Shifter Cables, it has to go to a 5 speed Getreg. It bolts on top of the Tranny and it the nearest one to you if you are standing behind the car. Can you tell me how much it would cost, shipping and all. Can you also send me a picture when you pull it out of the car. I will be able to tell you if it the right bracket or not. I have a picture of the one that's in my car. It's not that good of a picture. Thanks

i have no getrag part at all left,, try wheels1 chris,, he might have what your needing, how bout it chris can you help him out

if all the wires are still attached and the wiper is still touching the coil I'd assume it's good. A way to check would be with an ohm meter or by pluging it into a fiero and move the float to different positions while having someone make sure the gauge is full(or close) at when the float is all the way up, and empty(or close) when it's all the way down. Testing or not is up to you. But uhh how much to the same address as last time?

in need of a shifter assembly for a 5 speed

Tony

quote Originally posted by 86blackse: NEED ANY PARTS ,,,I PROBALY GOT WHAT YOU NEED,, if you dont see it ask me i got it complete v6 4 spd engine harness 4 spd shifter with both shifter cables 100's off parts, if you dont see what you need in the pics ask im sure we have what your looking for, just went and pulled a truck load of parts today,, get them while their here

Would you have the coil bracket for an 88 gt.

sorry guys,my computer crashed and i lost all my info, if you need a part let me know i probaly have what you need

i need a header/exhuast manifold....i need the one that is closest to the rear window....it can be used, but needs to be in perfect condition (no cracks, welding done to it, bolts not threaded, ect)

In the picture of the tranny, i see that the bracket for the shift and select cables is still there, would you consider selling that,or are you going to sell it with the tranny only? I you will sell it seperately, i would be interested in that.

quote Originally posted by shermdizzle: i need a header/exhuast manifold....i need the one that is closest to the rear window....it can be used, but needs to be in perfect condition (no cracks, welding done to it, bolts not threaded, ect)

i have the one closest to the trunk but not the back one next to the rear window

pm sent