Ok I'm not looking for much as these require modifcations to fit. I'll buy rocker bolts as these don't have them currently. You're probably asking what it takes to fit? well below is what it'll take. Mine hit on the pushrods so I decided to make it easy and purchase 1.8's
1) modify the pedestal guide notches for the pushrods are opened up a little bit. They can use the old ones as a reference.
2) make sure they install the rocker correctly and use NEW bolts. The part on the rocker where the bolt goes thru must have the stepped end UP (the bolt head sits in this recessed area).
3) remove the casting flash from the cylinder head itself, so the pushrod cannot contact the head (must check clearances on their heads with parts installed).
Ok my rambling is over
just want to make sure people don't mess up and have issues down the road. I would really like to see what I'm asking below. These aren't Gen 3 rockers, but the price for Gen 3's would run you $380-400 brand new. I bought them for $400 2 years ago on clubgp with 1500 miles and I slapped another 2000 miles. Total 3500 miles on them. I will get pics up in a few hours.
like I said I'd really like to see the price I'm asking, but I will take offers. I don't need these sitting around collecting dust
I don't know what company these were but I believe Intense. I've searched high and low over clubgp trying to find the make.
Price: $130-150 plus shipping
------------------
http://formula.cryptnix.com