Has anyone ever seen this done? I have an 86 firebird and don't care for the stock wing on it and love the look think a fiero spoiler would look better. If anyone has any pictures of one on a similar year firebird or trans am could you post it here.

I also need the measurements of a fiero spoiler from end-to-end and between the center of the spoiler mounts.

the firebird spoiler measurements are:
60 3/8" (end-to-end. Measured from the front points)
39 3/8" (between center of spoiler mounts)

Thanks in advance,
-Caleb

------------------

[This message has been edited by BH2OFiero (edited 03-23-2007).]

I had a 3rd Gen 87 Camaro in high school that I put a fiero wing on. I actually had to weld the exsisting holes shut and then add the holes in for the Fiero wing. I did back up the wing to where it hung over the tail lights and it looked really good. It hung over the sides a bit but looked like it was built that way.
I will try and look for some pictures of it.

quote Originally posted by Fastkx: I had a 3rd Gen 87 Camaro in high school that I put a fiero wing on. ...It hung over the sides a bit but looked like it was built that way.

The Fiero wing should look good on the Firebird.
FWIW... Even though they use the same decklids (hatches?) the Firebird fenders don't seem to taper in quite as much at the top as the Camaro's, so the overhang at the tips should be even less.
I put a 92 Z28 wing (the tall, outrageous one) on my 88 Firebird. It would have been perfect if it had been an inch wider.

------------------
Raydar
88 4.9 Formula IMSA Fasback..........................88 3.4 coupe................................................

Read Nealz Nuze! Praise the Lowered!

bump...just in case any other firebird/trans am owners missed it.

quote Originally posted by BH2OFiero: I still could use the measurements of a fiero spoiler though. The guy on the firebird forum hasn't had time to take them yet.

Give me till daylight.

Sorry BH2OFiero I have looked and looked for pictures and have had no luck, my wife tends to think I didn't take anymore pics of the car after I put the wing on the car. I am real sorry I thought I had taken pic just before I sold it.

quote Originally posted by BH2OFiero: I also need the measurements of a fiero spoiler from end-to-end and between the center of the spoiler mounts.

59 1/2 end to end, 27 inches between.
(note) The end to end measurements are on forward side of the spoiler. The Fiero spoiler curves slightly inward on the rearward edge. I could not get an exact measurement but it is right at 58 inches.

I put a Firebird wing on a Fiero once, does that count?

------------------
Beware the beast "man" for he is the devil's pawn. Alone among God's primates, he kills for sport....or lust....or greed. Yeah, he will murder his brother to possess his brother's land. Let him not breed in great numbers, for he will make a desert of his home....and yours. Shun him....for he is the harbinger of death!

quote Originally posted by cliffw: 59 1/2 end to end, 27 inches between. (note) The end to end measurements are on forward side of the spoiler. The Fiero spoiler curves slightly inward on the rearward edge. I could not get an exact measurement but it is right at 58 inches.

I measured from the forward side as well. That's not too much of a difference.

27" from center to center of the mounts. looks like I'll be filling and drilling some holes.

------------------

thats pretty sweet. i worked with a guy who put a fiero spoiler on his 79 mustang hatchback

That does look preety good.

Doesn't look to bad at all. I like the way you hung over the back end a bit. Good job!