for a 1998 thru 2001 4WD Chevy Blazor or 4WD GMC Jimmy or 4WD Olds Bravada?? Does it need to go to the dealer??

I know my saturn is to put the key in the car and in run position with the car off. Press and hold both the lock and unlock buttton untill the lights flash or locks go up, cant remember which.

Just my guess.

It is usually in the owners manual if you have it

KIN

Google helps with that. Don't pay the stealer to do it, obviously.

On my Mazda it involved a series of putting the key into the acc position and opening and closing the drivers door 3 times (or just pushing the button )
Then I had to press the lock button on each remote I wanted to program.

Also check in with car forums for that make and model car, or email an ebay seller and ask, maybe you'll strike luck there.

-M

Try here, we have a lot of GM owners on here.

http://www.chevysuburbanclub.com/

Mazda is not anything like GM.

I don't know anything about the dam things but I know a lot of guys on there have them.

Or here,

http://www.programyourremote.com/

They have the instructions for just about all of them.

------------------
Technology is great when it works,
and one big pain in the ass when it doesn't.
Detroit iron rules all the rest are just toys.

[This message has been edited by 84fiero123 (edited 03-20-2007).]

Close all doors.
Insert key into lock cylinder.
Press and hold door unlock switch.
While holding door unlock, cycle ignition ON, OFF, ON and then OFF.
Release unlock. Doors will lock and unlock to confirm "Program Mode".
Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of 15secs., the doors will lock/unlock to confirm programming.
Repeat previous step for up to 4 transmitters.
Turn ignition to RUN position in order to exit Keyless Entry transmitter mode.

------------------
AIM:Onefast2M8
03 Xtreme 4.3 5 speed
02 Jetta 1.8t

thanks guys for the help and quickness very much appricated

MMM, I had to pay the dealer to do my Lumina minivan. They took out the glove box to access the computer. I have no idea what they did, but watched them for 20 mins and it cost me $100.

Anyone have a "key dance" to set the keyless remote for my '97 Dodge Avenger???

just for reference, on fords you turn the key from off to run (not starting) 7 times. when the lights start flashing hold the unlock button on the key fab and it programs it. also the push pad entry on the handles, the code is located on a sticker on top of the ecm. its five digits. on explorers its located on the drivers side rear wheel well where you acess the jack.

These car manufactures really have a sense of humor. Makes you wonder why they lead you around the barn "or car in this case" just to program a remote.

quote Originally posted by Spoon: These car manufactures really have a sense of humor. Makes you wonder why they lead you around the barn "or car in this case" just to program a remote.

oh i forgot, you have to pat your head and rub your belly while saying the alphabet backwards to get it to work.