We have several things to cover for activities, which I will run down below, for those that may not be able to make the meetings:
1) regular club meeting on April 27, but I propose a post lunch meeting activity... make our way to some cinema to catch a matinee of Pain & Gain, the new Mark Wahlberg and Rock movie that has more than a few '88 Formula scenes!
2) AER Show has been announced for May 4th. Satisfy that desire to do the large car show scene and win a tall trophy! We've had years of association with this show, it would be nice to continue this relationship with the NTMC. Only $20, you get a shirt, and is tax deductible! http://aermanufacturing.com/events/index.html
3) regular club meeting at Pappas BBQ: May 25th, 1100-- whenever!
We have had some great events recently from Spring Fun Run, Spring Fling, and AAFO Round-Up. captions and and fun pics following our adventures can be found on Twitter! Follow us @ northtexasfiero
------------------ <---- did you buy Cliff a beer? ......................................................www.northtexasfieroclub.org
[This message has been edited by blakeinspace (edited 05-29-2013).]
IP: Logged
04:33 PM
PFF
System Bot
Fierosmith Member
Posts: 568 From: East Texas, USA Registered: Jun 2007
It looks like we have several interested in going to Pain & Gain!... cool... hopefully the movie is not terrible. Michael Bay just apologized for even making Armaggedon.... that can't bode well.
Anyway... the movie is playing near Pappas at the Cinemark on Webb Chapel. I think a good showtime to shoot for is the 1415 showing. The freeway is under construction in the area... so I googled us something that looks like a promising easy path from Pappas. http://goo.gl/maps/3FsNO
Hope to see y'all tomo!
[This message has been edited by blakeinspace (edited 04-26-2013).]
IP: Logged
10:19 AM
fieroseblack Member
Posts: 1047 From: Flint, Texas USA Registered: Apr 2002
I'm sure there will late comers again, since its on the same day as Cars & Coffee. Too bad it's not Cars & Coffee & Pie. I'll be there when I get there.
IP: Logged
11:36 AM
TXOPIE Member
Posts: 2734 From: Leonard, TX, USA Registered: Mar 2012
I heard about the tornadoes in and around Granbury...Ft Worth. Blake, I know you live scary close to there. Is the "cliffw suite" undamaged ? No, seriously, is everything ok up there ?
IP: Logged
07:38 AM
Tom Slick Member
Posts: 4342 From: Alvarado, TX Registered: May 2003
Originally posted by cliffw: I heard about the tornadoes in and around Granbury...Ft Worth. Blake, I know you live scary close to there. Is the "cliffw suite" undamaged ? No, seriously, is everything ok up there ?
Blake is out of town this week living it up in the great northwest. He texted me last night as the storms where traveling thru our part of N.Texas. From all the radar images I saw it looked like his place got a lot of rain and the tornados where just a few miles south of him. It also looked like Cleburne got hit with some bad weather too, Blake texted DIY_Stu since he lives in Cleburne but didn't hear anything back. Hopefully he's ok.
[This message has been edited by Tom Slick (edited 05-16-2013).]
IP: Logged
08:40 AM
cliffw Member
Posts: 37916 From: Bandera, Texas, USA Registered: Jun 2003
Arlington, TX to Texarkana, AR FROM UTA TURN RIGHT OUT OF PARKING LOT ONTO DOUG RUSSELL RD 0.2 mi Turn Left onto Cooper 3.9 mi I-20 East / Dallas (stay left for 1-20) 31.8 mi Continue on I-20 East / Shreveport 49.7 mi Exit 498 – Terrell. Left at end of ramp on FTM-148 North 51.9 mi Turn Right on US-80 East / W. Moore Ave. Follow 80 East toward Mineola 100.3 mi Turn Left on US-69 N./N. Pacific St in Mineola. (US-69 will turn into TX-37 N.) 109.9 mi Turn Right to continue on TX-37N (in Quitman) 110.3 mi Turn Left to continue on TX-37N (in Quitman) 125.7 mi Turn Right on TX-11 East (in Winnsboro). Follow TX-11 East toward Pittsburg 146.9 mi Turn Left to continue on TX-11 East (in Pittsburg). Follow to Linden. 169.6 mi Turn Left to continue on TX-11 East 184.5 mi Turn Left on US-59 N. (after driving through Linden) toward Atlanta. 196.7 mi Turn Left to continue on US-59 N. (Atlanta) 218.0 mi Turn Right on Frontage Rd/E Wallace Dr 218.3 mi Bear Left for TX-151 Loop East 221.5 mi Continue on AR-245 East 227.8 mi Exit Arkansas Blvd – Left at Light 230.3 mi Turn at first Right to continue of AR-245 231.2 mi ARRIVE @ FOUR STATES FAIRGROUNDS
IP: Logged
07:53 AM
May 25th, 2013
Tom Slick Member
Posts: 4342 From: Alvarado, TX Registered: May 2003
Guys need a little assistance, not always the best with names. I need to know who is circled in red below:
He stated at the show that he had a friend with a machine shop.
I need BMWguru's brackets made up out of aluminum: Once the rear bracket has been milled, I will need to weld a quarter-inch thick, one inch square with a centered hole to each end of it. The front bracket drawing is complete and can be milled as one piece. These are saved as .EMS files for eMachineShop CAD Design File (eMachineShop)
Please PM me if this is you or if you know who that is...thanks!
[This message has been edited by TXOPIE (edited 05-28-2013).]
IP: Logged
02:32 AM
josef644 Member
Posts: 6939 From: Dickinson, Texas USA Registered: Nov 2006
Guys need a little assistance, not always the best with names. I need to know who is circled in red below:
He stated at the show that he had a friend with a machine shop.
I need BMWguru's brackets made up out of aluminum: Once the rear bracket has been milled, I will need to weld a quarter-inch thick, one inch square with a centered hole to each end of it. The front bracket drawing is complete and can be milled as one piece. These are saved as .EMS files for eMachineShop CAD Design File (eMachineShop)
Please PM me if this is you or if you know who that is...thanks!
<---- did you buy Cliff a beer? 
