so i have a set of 18 inch spyn Mod 5 on my car right now they no longer make these wheels in 5 by 100, i will be selling them with rubber if the forum can find something similar but better, So put your choices here and i will take a look i am not interested in black wheels and the must be deep dish 5 by 100 and fit my 88 fiero help me find a new set of shoes!!!
i have seen a black 88 Gt with 19s looks sweeeeeT !!


here is what i have, just got board of them need to upgrade !!

Forgelines

Style - SP3P



http://www.forgeline.com/pr...ier-series/sp3p.html

unboundmo has the forgelines on his fiero !



Vellano

Style - VSH



http://vellanowheels.com/collection/VSH/vsh.htm

saw them on a ferrari at an exotic car rally a week ago and drooled all over myself





There is one more set that i might recommend, looks very simlair, but i am saving that one for me hehehe

[This message has been edited by exoticse (edited 09-08-2011).]

Oh Boy the VSH looks sweeeeet !! keep them comming please

Price range? Or open to any suggestions?

What are the offsets for '88's?

i belive my wheels i have now a 35 offset front and back 18 by 7.5 front and 18 by 8.5 rear if i went with new 18s i would like the same if 19s not sure what offset i need, price range wont matter once i see something i like as long as it will work on my car

i would say this wheel is going to be in the 500 each range but this is the idea i want ,anyone got photo shop !!

[This message has been edited by RULOOKIN (edited 09-08-2011).]

RULOOKIN,

Both sets of wheels are 3 piece custom wheels, that you can basically have built to whatever bolt pattern, offset, size, width, and lip that you want. The down side is they are a bit pricey.

Depending on the size, expect to pay "at least " around $800 (each) or more for 19's and up.

Wheels, to me, pretty much make the car so i guess it depends on what people are willing to spend. Some might pass out at those prices, while others just save a little longer and get what they really want.

[This message has been edited by exoticse (edited 09-09-2011).]

Fikse Profil 5S.



God knows what price, but like the other three-piece wheels that Exoticse posted, you can have them custom-made to fit like a glove. And damn do they look good on that NSX!

[This message has been edited by Carcenomy (edited 09-09-2011).]

Boze makes any wheel that you want in any size. You are correct in that they range from $450-$500 per wheel. The last time I called them, basically the "Boze" wheels were $450 each. The "ZE Forged" were true 3 piece wheels and are priced at the $500 level.
http://bozeforged.com/wheels.html

RULOOKIN PM sent

------------------

My build Thread
http://www.tylerstoy.com

http://forums.vwvortex.com/...f6073be33228413ed65d

Don't know if you'd consider used, but these are gorgeous and a steal at that price, which I'm sure is negotiable. Hell, I'd even help arrange getting these to you since he's somewhat local to me.

Personally I love the Chrome HRE's that MadCurl has on Choptop #20. they just look SOO sharp to me.

quote Originally posted by Syn: Personally I love the Chrome HRE's that MadCurl has on Choptop #20. they just look SOO sharp to me.

Actually that would be my first choice, buuuuuut they don't make them anymore. I was crushed when i found out.

Instead i think i will be going with these instead (look nearly identical to the HRE wheels),..i-forged classics !

http://iforged.com/us/wheels_detail.php?WhID=17

[This message has been edited by exoticse (edited 09-09-2011).]

If your bored with them, get something different. Every wheel I see here looks like variations of the same thing. Theyre all just 5 spokes with splits.

quote Originally posted by rogergarrison: If your bored with them, get something different. Every wheel I see here looks like variations of the same thing. Theyre all just 5 spokes with splits.

He said he wants something similar, to what he has, but better and with a deeper dish.

[This message has been edited by exoticse (edited 09-09-2011).]

quote Originally posted by exoticse: Actually that would be my first choice, buuuuuut they don't make them anymore. I was crushed when i found out. Instead i think i will be going with these instead (look nearly identical to the HRE wheels),..i-forged classics ! http://iforged.com/us/wheels_detail.php?WhID=17

THEY DON'T! NO!!!! ohh well those look FANTASTIC! thanks for the info! I know what rim I'MMMMMM GETTING!

Please! Let me know should you decide to sell those SPYN's! I'm confident we can find a number that will make us both happy!

Cheers,
Rich

quote Originally posted by sabooo: Please! Let me know should you decide to sell those SPYN's! I'm confident we can find a number that will make us both happy! Cheers, Rich

will do!,
if i find something resonable in the 450 to 500 a peice range, if i stay 18 inch i will get same offset as what i have now but realy trying to get a deeper dish on the rear if i need to go coil overs i do it, but i also do not want the wheels outer edge sticking out too much, the wheels i have on my rear now if alingment is set flat they stick out a bit with negitve 1 on the camber i think (strut) they look prefect .
fronts wont be an issue ordering its the rears that become a problem ! if i went 9 inch wide 18s on rear (with coilovers) what specs do i give the rim manufacturer to give me a good offset deep dish but not sticking out ?
I thought about 45 offset but i think it will stick out

A set of HRE 540 19x8.5, 5x100, 32mm-off set sold this week for $925 and week before that another HRE, but were 18s. Seriously, you guys need to start looking around.

------------------



"Friends don't let their friends drive stock."

quote Originally posted by madcurl: A set of HRE 540 19x8.5, 5x100, 32mm-off set sold this week for $925 and week before that another HRE, but were 18s. Seriously, you guys need to start looking around.

send a link for the ebay on thoes wheels
I have been looking around and i was even thinking going 18 front 19 rear any one have pics of off size wheels on a fiero

[This message has been edited by RULOOKIN (edited 09-10-2011).]

quote Originally posted by madcurl: A set of HRE 540 19x8.5, 5x100, 32mm-off set sold this week for $925 and week before that another HRE, but were 18s. Seriously, you guys need to start looking around.

Curly got the first set, and i almost purchased the second set but got outbid at the very end. I could have purchased them outright, but they were not my first choice in style so i just took a chance and it was not meant to be.

quote Originally posted by RULOOKIN: send a link for the ebay on thoes wheels I have been looking around and i was even thinking going 18 front 19 rear any one have pics of off size wheels on a fiero

The HREs are all sold. However, there's several other options using the 5x100, 35, 57.1 bore.

http://cgi.ebay.com/ebaymot...&hash=item19c884d629


http://cgi.ebay.com/ebaymot...&hash=item5d302c14b0

And several more here:

http://stores.ebay.com/BuyW..._sasi=1&_sop=2&_vc=1

You must make sure that the hub bore is the same as the Fiero.

[This message has been edited by madcurl (edited 09-10-2011).]

i was loooking at the 19s by 19 by 8 inch on the front is going to stick out too much need 19 by 7.5, 19 by 8 is finr for the rear
was looking at these wheels nice but i am not a big fan of black rims but these are not bad
http://cgi.ebay.com/ebaymot...&hash=item53e7b366f8

[This message has been edited by RULOOKIN (edited 09-10-2011).]

Here was set on Ebay;

http://cgi.ebay.com/ebaymot...geName=STRK:MEWAX:IT

Email the owner for I don't think he actually sold the rims.

[This message has been edited by madcurl (edited 09-11-2011).]

How much would you sell yours for once you gott some new shoes. Would those fit an 86 gt?