Pennock's Fiero Forum
  General Fiero Chat - Archive
  Picking up another Fiero this week

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


Picking up another Fiero this week by thumper_64735
Started on: 06-21-2010 07:24 PM
Replies: 8
Last post by: DefEddie on 06-27-2010 09:34 AM
thumper_64735
Member
Posts: 704
From: Lebanon, MO, USA
Registered: Sep 2006


Feedback score: N/A
Leave feedback

Rate this member

Report this Post06-21-2010 07:24 PM Click Here to See the Profile for thumper_64735Send a Private Message to thumper_64735Direct Link to This Post
Well, I made a deal with a fellow Fiero owner here in KC. He needs his 2000 Taurus fixed so he can get back and forth to work, and can't afford both cars. The Fiero is a white 84 that a PO started to turn into an Indy clone. It needs a little work, is an automatic, and has all the power options. I am going over to assess it tomorrow evening after work, and I'll get some pics of it then. All it is going to cost me is labor to change a power steering line and some tie rod ends. Not a bad trade I don't think.
IP: Logged
PFF
System Bot
Boonch
Member
Posts: 157
From: Hohenwald, Tennessee
Registered: Aug 2004


Feedback score: N/A
Leave feedback

Rate this member

Report this Post06-21-2010 11:24 PM Click Here to See the Profile for BoonchSend a Private Message to BoonchDirect Link to This Post
ok so he is going to Fix the taurus and ditch the Fiero ?!?, personally i would send the taurus to the crusher and drive the fiero , but glad to hear about your nearly free car, im not a ford fan at all if you can tell LoL


---Tim---
IP: Logged
thumper_64735
Member
Posts: 704
From: Lebanon, MO, USA
Registered: Sep 2006


Feedback score: N/A
Leave feedback

Rate this member

Report this Post06-22-2010 12:03 AM Click Here to See the Profile for thumper_64735Send a Private Message to thumper_64735Direct Link to This Post
Neither am I, but any time I can trade a little work for a Fiero, I'll jump on it. This will make number 3 in the stable.
IP: Logged
DefEddie
Member
Posts: 1252
From: SALLISAW,OK
Registered: Jul 2009


Feedback score: (1)
Leave feedback

Rate this member

Report this Post06-22-2010 01:49 AM Click Here to See the Profile for DefEddieSend a Private Message to DefEddieDirect Link to This Post
Both jobs are simple on a taurus,I would do it for simply a parts car myself.
If it runs or close to it that's a steal.
IP: Logged
thumper_64735
Member
Posts: 704
From: Lebanon, MO, USA
Registered: Sep 2006


Feedback score: N/A
Leave feedback

Rate this member

Report this Post06-22-2010 01:26 PM Click Here to See the Profile for thumper_64735Send a Private Message to thumper_64735Direct Link to This Post
Thats just it, the car does run and drive. Needs very minor work to make it a nice car from the sounds of it. I will know more when I make it over to look at it after work this eveing.
IP: Logged
thumper_64735
Member
Posts: 704
From: Lebanon, MO, USA
Registered: Sep 2006


Feedback score: N/A
Leave feedback

Rate this member

Report this Post06-22-2010 09:19 PM Click Here to See the Profile for thumper_64735Send a Private Message to thumper_64735Direct Link to This Post

thumper_64735

704 posts
Member since Sep 2006
A few pics of the new Fiero. She is an 84, a little rough, but she does run and drive. She's a perfect candidate for the wife's 3800 SC swap.









Just look at those glass sail panels, lol. Almost makes up for the shape of the seats, lol

[This message has been edited by thumper_64735 (edited 06-23-2010).]

IP: Logged
DefEddie
Member
Posts: 1252
From: SALLISAW,OK
Registered: Jul 2009


Feedback score: (1)
Leave feedback

Rate this member

Report this Post06-26-2010 04:24 PM Click Here to See the Profile for DefEddieSend a Private Message to DefEddieDirect Link to This Post
I have friend looking for an 84 duke motor.
When ya pulling it?
IP: Logged
thumper_64735
Member
Posts: 704
From: Lebanon, MO, USA
Registered: Sep 2006


Feedback score: N/A
Leave feedback

Rate this member

Report this Post06-27-2010 12:40 AM Click Here to See the Profile for thumper_64735Send a Private Message to thumper_64735Direct Link to This Post
Not sure. This one may need a rebuild, as it does sound like it might have some lower end noise. If things work out right, I will be pulling it in about 3 weeks or so. Let me know if he wants it or not, as I would let it go pretty cheap.
IP: Logged
DefEddie
Member
Posts: 1252
From: SALLISAW,OK
Registered: Jul 2009


Feedback score: (1)
Leave feedback

Rate this member

Report this Post06-27-2010 09:34 AM Click Here to See the Profile for DefEddieSend a Private Message to DefEddieDirect Link to This Post
I linked here from a local forum so he could check it out,he's on here also.
He'll probrably post up if he's interested.
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery | Ogre's Cave
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock