I just saw a Notchie in our area with tail lights done by Driven Visions. I tried drivenvisions.com and their old tel number...both no longer there. Does anybody know if they are still in business and where? I am looking for a set of their tail lights. Here is the last contact info:
Driven Visions, Duluth Joe Ophoven and Jenny O'Konek 6205 Grand Avenue Duluth MN 55807 218-628-3748
Jim
------------------ Jim 86 SE 355 Body Kit w/3.1 Auto (Sold) 87 T-Top Coupe 2.8/5 Speed new project
IP: Logged
10:26 AM
PFF
System Bot
Dennis LaGrua Member
Posts: 15887 From: Hillsborough, NJ U.S.A. Registered: May 2000
Sadly Joe of Driven Visons passed away at a very early age last year. I don't believe that anyone has continued the business. Joes legacy is that he designed and built what was in the opinion of many, the nicest rear light treatment ever offered for notchbacks.
------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, 3.4" Pulley, N* TB, LS1 MAF, Flotech Exhaust Autolite 104's Custom CAI 4T65eHD w. custom axles, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
I was wondering why my emails were getting returned from Driven. I was emailing him the pictures of mine after installing the wiper cowl and extractor hood. I think he was the only one who made the wiper cowl too.
IP: Logged
10:18 PM
IMSA GT Member
Posts: 10678 From: California Registered: Aug 2007
Sadly Driven Visions is history. I can't that nobody lives close enough to the business to see if there's a way to get a hold all of the Fiero molds.
Try Kahines fiberglass Fiero parts. He had something close to what you're looking for your car. Try emailing him and see what happens. LMK.
i know the building is up for sale where his shop used to be. Im not sure what the family did with all the molds or anything.its too bad, Joe was a very nice guy.
i acutally have a hood scoop/vent that i purchased from them a little while back...must have been right before he passed away.. it's not been installed yet and i don't have any pictures....it's the same one used in this thread...it's that only other one i've seen like it
This looks like an exact duplicate of the Driven Visions style.
------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, 3.4" Pulley, N* TB, LS1 MAF, Flotech Exhaust Autolite 104's Custom CAI 4T65eHD w. custom axles, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
