Pennock's Fiero Forum
  General Fiero Chat - Archive
  Looking for someone to install a set of V-6 vacuum lines and take pictures

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


Looking for someone to install a set of V-6 vacuum lines and take pictures by Rodney
Started on: 10-16-2009 04:53 PM
Replies: 11
Last post by: Fieromaniac on 10-18-2009 01:48 PM
Rodney
Member
Posts: 4715
From: Caledonia, WI USA
Registered: Feb 2000


Feedback score: (4)
Leave feedback





Total ratings: 267
Rate this member

Report this Post10-16-2009 04:53 PM Click Here to See the Profile for RodneyClick Here to visit Rodney's HomePageSend a Private Message to RodneyDirect Link to This Post
I'm offering a set of my stainless steel V-6 vacuum lines for $50 (includes shipping). I am looking for someone that has an excellent condition V-6 engine or is restoring a V-6 engine. There is no hurry for this. If it takes a few months I am OK with that. I am looking for some pictures of these vacuum lines installed on the 2.8 (or 3.4) for my web page. I'm looking for someone that is looking to make their engine show car clean or just very clean. I would prefer someone that has their valve covers and intake in the OEM color or close to it. I would prefer someone who has an engine that is somewhat close to stock. Someone that can take their time installing them and take pictures etc.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

IP: Logged
PFF
System Bot
Tony Kania
Member
Posts: 20794
From: The Inland Northwest
Registered: Dec 2008


Feedback score:    (7)
Leave feedback





Total ratings: 305
User Banned

Report this Post10-16-2009 04:58 PM Click Here to See the Profile for Tony KaniaSend a Private Message to Tony KaniaDirect Link to This Post
Have you a pic of them. I may be interested. This is my engine. If it is not what you are looking for, I would not be offended.



Tony
IP: Logged
labbe001
Member
Posts: 814
From: Alabaster, AL
Registered: Jun 2008


Feedback score:    (6)
Leave feedback

Rate this member

Report this Post10-16-2009 05:18 PM Click Here to See the Profile for labbe001Send a Private Message to labbe001Direct Link to This Post
hey rodney...i'm in the middle of restoring my blue 87GT..planning a complete restoration in time for the fiero factory swap meet in the early spring..i'm keeping it primarily stock with few modifications...i'm doing the 7730 swap so i'll have the digital egr that you can see in the engine bay....i'll also be deleting the tb heater lines and a few other things....all in all, it will look fairly stock....i will be getting the intake powder coated w/ the upper being the ruby red (not exactly stock but close...very clean look)....i currenty have the engine out and will be repainting the bay....i could send you a pic but like i said,i'm in the middle of restoration so it won't be pretty...haha...just let me know
IP: Logged
MooCow
Member
Posts: 2263
From: Charlotte, NC
Registered: Sep 1999


Feedback score:    (22)
Leave feedback

Rate this member

Report this Post10-16-2009 06:36 PM Click Here to See the Profile for MooCowSend a Private Message to MooCowDirect Link to This Post
Hi Rodney,

Here is a pic of my engine. I actually just took it out to replace/paint a few more items on it. I would love to help you out. I plan to put the engine back in before the end of next month. Everything on the car is stock looking, and will stay that way, just cleaner.



Thanks,

Ken~
IP: Logged
Richjk21
Member
Posts: 2228
From: Central Square NY, USA
Registered: Feb 2006


Feedback score:    (9)
Leave feedback

Rate this member

Report this Post10-16-2009 09:40 PM Click Here to See the Profile for Richjk21Send a Private Message to Richjk21Direct Link to This Post
 
quote
Originally posted by MooCow:

Hi Rodney,

Here is a pic of my engine. I actually just took it out to replace/paint a few more items on it. I would love to help you out. I plan to put the engine back in before the end of next month. Everything on the car is stock looking, and will stay that way, just cleaner.



Thanks,

Ken~


lol .... I saw your red EGR cap, and thought for a moment that was my engine compartment But then I noticed the Fiero emblem wasn't there



Rich
IP: Logged
Foxy Fiero13
Member
Posts: 1496
From: racine,wisconsin,usa
Registered: Mar 2008


Feedback score:    (12)
Leave feedback

Rate this member

Report this Post10-16-2009 09:54 PM Click Here to See the Profile for Foxy Fiero13Send a Private Message to Foxy Fiero13Direct Link to This Post
rodney u could have posted this like a week ago i just bought a new engine and im taking the vaccum lines off to replace mine im only like 10 miles from ur house too =( well let me know
IP: Logged
MRBLUE87
Member
Posts: 294
From: Winnebago Illinois USA
Registered: Jan 2003


Feedback score: (5)
Leave feedback

Rate this member

Report this Post10-16-2009 10:04 PM Click Here to See the Profile for MRBLUE87Send a Private Message to MRBLUE87Direct Link to This Post
Rodney. My son Eric and I will be taking the plenum off his 3.4 1987 GT showcar this winter to put on a big bore throttle body and freshly stock orange powder coated valve covers. You might recognize his car from the Dells and Fierorama as the silver GT with two black stripes that has lived through two floods. the engine is stock appearing with stock colors. Only non stock item is tube headers which should not show in photos of the vacuum line area. Would be happy to document the installation for you. Ray Dyreson
IP: Logged
randye
Member
Posts: 14219
From: Florida
Registered: Mar 2006


Feedback score: (1)
Leave feedback





Total ratings: 204
Rate this member

Report this Post10-16-2009 10:06 PM Click Here to See the Profile for randyeClick Here to visit randye's HomePageSend a Private Message to randyeDirect Link to This Post
Rodney,
I just received the new set of vaccuum lines I ordered from you this week.
You have a PM....
IP: Logged
yellowstone
Member
Posts: 9299
From: Düsseldorf/Germany
Registered: Jun 2003


Feedback score: N/A
Leave feedback





Total ratings: 250
Rate this member

Report this Post10-17-2009 02:35 AM Click Here to See the Profile for yellowstoneSend a Private Message to yellowstoneDirect Link to This Post
These are pix when I first installed your vacuum lines in 2005:










Here they are going into the rebuilt engine:



IP: Logged
unboundmo
Member
Posts: 2242
From: California
Registered: Sep 2006


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-18-2009 02:22 AM Click Here to See the Profile for unboundmoSend a Private Message to unboundmoDirect Link to This Post
I got yah Rodney.. Nothing but greatness from you......



This one is full res for close ups if you want

This images is larger than 153600 bytes. Click to view.




Can't really tell on the next pic... but it look good for reference anyway




Here's your old style dog bone






Here's my finished 3.4L P/R built , 30 over with Ross forged pistons, ARI forged rods, chrome moly push rods, 1.6 crane gold rockers, running a 260 comp cam.

This images is larger than 153600 bytes. Click to view.


sorry, I had to throw the car pic in too.



IP: Logged
unboundmo
Member
Posts: 2242
From: California
Registered: Sep 2006


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-18-2009 02:26 AM Click Here to See the Profile for unboundmoSend a Private Message to unboundmoDirect Link to This Post

unboundmo

2242 posts
Member since Sep 2006
This one catches the other side.. I left it a big res for close up cropping.

This images is larger than 153600 bytes. Click to view.


I forgot to mention in reference to the modified A/C bracket... Works great for the 3.4L

[This message has been edited by unboundmo (edited 10-18-2009).]

IP: Logged
PFF
System Bot
Fieromaniac
Member
Posts: 980
From: Hamburg, Germany
Registered: Nov 2006


Feedback score: N/A
Leave feedback

Rate this member

Report this Post10-18-2009 01:48 PM Click Here to See the Profile for FieromaniacClick Here to visit Fieromaniac's HomePageSend a Private Message to FieromaniacDirect Link to This Post
here the install of your stainless steel vacuum lines on a 88 formula

http://www.format-service.de/tips_15.htm

------------------
1984 Fiero Sport
1987 Fiero
1984 Fiero SE
1999 Chrysler Grand Voyager 3.3 LX LPG
SKYPE: Fieromaniac
*** nuclear winter cures global warming ***

IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock