I concider it a tribute to the Fiero. He could've chosen pretty much anything to put onto his drag car, or to make a drag car out of. He probably could've chosen a lot of things that would have been cheaper or more aerodynamic than the Fiero. But he didn't.
There are two things I do not like. TOO much sticking out of the front hood, and the rear is too narrow compared to the front.
I like this one better. But I definitely would buy the red one too. Any idea what he wanted for it?
------------------ 1988 Purple Fiero GTw/SC3800 conversion Best ET with 3.0 pulley,XPHOT cam, SS I/C and 105lb Valve springs: 12.38@110mph Best 60 Foot ever: 1.699
IP: Logged
07:22 PM
proff Member
Posts: 7401 From: The bottom of the world Registered: Oct 2004
Looks pretty much stock, to me... the headlight switch, that is . Very nice... one more to add to my list of "wouldn't want to do that, myself, but I admire the workmanship and uniqueness," vehicles.
IP: Logged
12:37 AM
Will Member
Posts: 14303 From: Where you least expect me Registered: Jun 2000
I find it hard to believe that it's simply Fiero body panels on a Camaro frame considering the wheel base and size of the Fiero compared to the longer F-bodys, plus the mounting points and the thousands of other problems you would have to overcome.
IP: Logged
08:16 PM
Boomtastic Member
Posts: 2359 From: Athens, Alabama Registered: May 2000
Fiero Brick - That's fine, but it's still sort of torn apart engine-wise so you can't hear it run just yet. (see below) You can go to my website and see it there running, but that was with the old fuel injection setup (which sucked).
Will - The engine is in the process of being rebuilt with a new cam/heads/intake/fuel injection setup/44# injectors/headers/etc etc. It doesn't run anything right now as everything is all torn apart.
IP: Logged
10:47 PM
Jermz238 Member
Posts: 1637 From: Newark, California Registered: Jan 2006
I find it hard to believe that it's simply Fiero body panels on a Camaro frame considering the wheel base and size of the Fiero compared to the longer F-bodys, plus the mounting points and the thousands of other problems you would have to overcome.
i dont think he meant it was literally a camaro rebody into a fiero, but in essence it has become a fiero-shaped camarobird. im okay with that