I bought some MrMikes lower door panels and am in the process of installing them. I would like to get some leather door pockets but MrMike does not make them anymore. I have conscidered reattaching the ones I already have like they are. Another other option is to have them done locally. Another is to not have them at all. Finally, are there any modern cars that have door pockets that would look as good or better that bolt on?
Keep them?
Leave them off?
I don't know what would look the best.
How they attach if you are interested. Six washer thin nuts on the back side that you can't really get a tool to grip on to. It is officially in the, "Harder than it needs to be category".
------------------ 87 Fiero SE
[This message has been edited by RACE (edited 06-03-2005).]
Wow speakers are a great idea, can that be done on a door with pre-existing door pockets without leaving old door pocket mounting holes to look unsightly?
IP: Logged
02:04 PM
KissMySSFiero Member
Posts: 5550 From: Tarpon Springs, FL USA Registered: Nov 2000
you could also find some Vinyl fiero pockets and Paint them with SEM paint. I wont have a fiero without pockets. You get used to having them.
DITTO, what he said. I would paint some vinyl pockets. I couldn't be without pockets in a stock Fiero. In in the Firebird interior Fiero where I have a center console I like having the door pockets, (and they are a lot bigger than stock Fiero pockets.).
IP: Logged
03:20 PM
Russ544 Member
Posts: 2136 From: S.W. Oregon Registered: Jun 2003
How they attach if you are interested. Six washer thin nuts on the back side that you can't really get a tool to grip on to. It is officially in the, "Harder than it needs to be category".
Actually those are nuts on the back. a nut driver takes them off easily.
IP: Logged
06:21 PM
edzards Member
Posts: 174 From: Omaha,Nebraska,USA Registered: Jun 2002
We recently put new carpet on our door panels. We used net map pockets from a BMW. We used black carpet and the net pockets are black. They turned out real nice.
IP: Logged
10:48 PM
RACE Member
Posts: 4842 From: Des Moines IA Registered: Dec 2002
I don't know. Is everything else (seats) Mr. Mikes? I would think if that is the only cloth, it would look a bit out of place. I like the vynil map pocket idea.
IP: Logged
11:21 PM
jscott1 Member
Posts: 21676 From: Houston, TX , USA Registered: Dec 2001
It's handy to have the pockets, but if you're going to show the car, I'd probably skip the pockets and shoot for the clean look. Door speakers would be nice also if they're done well. So my vote would be 1) skip the pockets 2) install speakers 3) door pockets. You could also have a local upholster shop make a set for you, maybe have a custom expanding set made possibly with a flap that folds over with Velcro to keep it clean and sharper looking.
[This message has been edited by F-I-E-R-O (edited 06-04-2005).]
IP: Logged
01:50 AM
Gokart Member
Posts: 4635 From: Mashpee, Ma. USA Registered: May 99
Yea, too bad Mr. Mike doesn't make the pockets anymore. I like mine with the embroidered logo...
------------------ www.yellowfiero.com/fiero.html 17" DEZENT T wheels with 215/40 tires front and 235/45 rear, KONI shocks, EIBACH lowering springs, drilled/slotted rotors, SS brake hoses. PU dog bone, all bushings and engine mounts, K&N air and oil filters, OZELOT exhaust, Mercedes SLK yellow paintjob, Mr. Mikes leather seats, door skins, shift and e-brake boots. MP3 deck and custom subwoofer behind passenger seat, F355 style front. Fiero Store rear swaybar, strut tower brace, black carpet, air intake. Rodney Dickman's competition short shifter, SS vacuum lines and deck lid strut. Billet aluminum dash kit from Kitcarman.
[This message has been edited by yellowstone (edited 06-04-2005).]
IP: Logged
05:12 AM
Master Tuner Akimoto Member
Posts: 2267 From: South Florida,USA Registered: Jul 2003
I think that I will leave them off for now. I really don't want to put painted vynal into the car since I have gone through the expense to make everything leather. I may try to have them recovered in leather locally.
Yellowstone, could you take some close up photos of your door pockets? I would like to see how they are stitched.
The speaker idea is good. I would have to get a new radio to go with them. I still have the factory stock unit.
IP: Logged
09:42 AM
jscott1 Member
Posts: 21676 From: Houston, TX , USA Registered: Dec 2001
Wow speakers are a great idea, can that be done on a door with pre-existing door pockets without leaving old door pocket mounting holes to look unsightly?
Speaker pods for the doors from AusFiero
------------------
IP: Logged
02:02 PM
FieroBUZZ Member
Posts: 3320 From: Ontario, Canada Registered: Feb 2001
The map pockets belong here. That way nothing falls out and gets lost on the ground. They are sort of hidden behind the seat so are not too obvious for crooks.
IP: Logged
04:09 PM
jscott1 Member
Posts: 21676 From: Houston, TX , USA Registered: Dec 2001
Behind the seat is a novel idea, but my seat is jammed up against the firewall as far as it will go. That pocket would be squished like nobodies buisiness.
IP: Logged
04:28 PM
F-I-E-R-O Member
Posts: 8410 From: Endwell, NY Registered: Jan 2005
I agree 100% I like the more moder pocket, though it seems it shoud be called something else but I can't think what. And the pods that Aus posted are exactly what I was thinking of. Thanks for saving me having to do a search.