ive tried appyin tint on my own didnt work out so good so i god to get some money to have it done,as far as lowering it well i want to but my muffler drags in my drive way as it is so im afraid to thank you all
IP: Logged
02:08 PM
jaskispyder Member
Posts: 21510 From: Northern MI Registered: Jun 2002
clear front signals with sylvania blue bulbs (they light orange) not sure if its lowered yet gap in the back looks like mine before the springs. I imagine you're running the same side wall tire as me 40's?
Originally quoted by Tinton Go frack yourself stimpy, its a message board you jackass. You post something I'm free to say whatever the hell I want, you're not a moderator. If you want to control what people post in "your" threads then go make your own forum, let's see if anyone actually joins it. Oh yeah, you wanna hear the truth? Really I don't give a **** if you live or die. I probably wouldn't have noticed, and no one on the forum would notice for at least a few months until a "Where is Stimpy" thread popped up. By that time you'd be long underground *******.
IP: Logged
02:14 PM
fierosrule Member
Posts: 301 From: Gainesboro,TN Registered: May 2005
im runnin 205/40zr17 right now roof wing what is that
inside joke (guy had a roof wing and quite a few people ripped on him then he took it off) I'm sure someone might post a pic, but I'll leave that one alone.
IP: Logged
02:27 PM
fierosrule Member
Posts: 301 From: Gainesboro,TN Registered: May 2005
That is a very nice color paint and looks like its in great condition, please don't mess with it (that's my favorite color blue ). I'd say go with AusFiero's scoops, chop the top, and cut a hole in the decklid and put in a window, then do a LS1 or LT1 engine swap and get a Corvette version of those engines, you know, the ones that say Corvette on top of them. I bet it'd freak some people out to look at your engine and see "Corvette" on top of it . The car could also use some lowering.
Get new seats.. or just remove those covers.. Making me sick.. lol jk. I would suggest to lower it as well, maybe a nice spoiler on the rear. Looks good so far!
------------------ Fiero 2MCUSTOM - 3.4 Pushrod swap in progress....
IP: Logged
10:35 PM
Jun 2nd, 2005
Kitskaboodle Member
Posts: 3232 From: San Jose, Ca. Registered: Nov 2004
Painting the inner fender wells satin or semi-gloss black will make the wheels and the car itself stand out better. (especially if your car is not lowered and you can see a lot of wheel well while parked).
Kit (86 GT)
IP: Logged
01:28 AM
Chewy_bjj Member
Posts: 256 From: Louisville,KY, USA Registered: Jan 2005
Put side scoops. I am putting side scoops on mine and a hood vent from fibersmith. Um other than that really only thing would be something like turning it into a wide body or something.
Painting the inner fender wells satin or semi-gloss black will make the wheels and the car itself stand out better. (especially if your car is not lowered and you can see a lot of wheel well while parked).
Kit (86 GT)
hmmmmm I may have to try this now.
------------------ ------------------ 87 Fiero GT Fastback for Sale $3,000 or B/O https://www.fiero.nl/forum/Forum4/HTML/026668.html Remanufactured 3.1 w/ 15k miles on it now,5 speed getrag with about 80k on it, 180k on the cars body http://www.cardomain.com/memberpage/858400
IP: Logged
08:27 AM
Frizlefrak Member
Posts: 2921 From: El Paso, Texas Registered: Aug 2003
)
not sure if its lowered yet gap in the back looks like mine before the springs. I imagine you're running the same side wall tire as me 40's?
). I'd say go with AusFiero's scoops, chop the top, and cut a hole in the decklid and put in a window, then do a LS1 or LT1 engine swap and get a Corvette version of those engines, you know, the ones that say Corvette on top of them. I bet it'd freak some people out to look at your engine and see "Corvette" on top of it 
. The car could also use some lowering.
