I hope you got my PM but if you didn't Thats ok. I would like to have some dark burl wood grain or something industrial (metal) looking for my GT but Only if you have time and its not a problem. I understand the responce was overwelming. If you do still have some and let me know how much for shipping and handeling and I will get it to you asap. It is good to see people who are willing to share their resorces.
You don't have any of the laminate style/color featured here, do you? https://www.fiero.nl/forum/Forum4/HTML/020021.html I just needed a few pieces to complete the set. I have a set identical to these, but am missing the GT gauges section and the shifter section is damaged. I looked all around for the correct color, but I couldn't find it anywhere. Please send me an E-mail if you have it. Thanks!
Thanks.
Hard to say without a better picture. If you have a scanner, scan a pic and email it to me. I don't need to see the whole bezel, just need to see a straight-on closeup, at least 2" X 2" actual size to get a comparison with our stock samples. It looks a little like honey maple, but I don't think it has the dark swirls I see in those pics.
I won't be fillling any new requests until the folowing are filled 1st. (Listed in no particular order) Revin (I'll check on the plexi mirror stock tomorrow. I know we have smoked mirror-not sure about regular mirror. I think it's 3/16) Silver86E-tinted plexi-ready to mail. Songman-tinted plexi-ready to mail.-tan wooddgrain(I'll send some sample pics) swirl-maybe tomorrow. Spiff-alumasteel-hopefully tomorrow. sthtxfiero (need mailing address)-alumasteel-hope to cut tomorrow. Taedir-alumasteel-will cut tomorrow I hope. Earl-dark burl wood or industrial metal (Need a better description of Dark burl wood grain-what exactly is burl?) FastIndy-acyrlic-ready to mail Fieroman87-navaho red and sunflower yellow-cut today goyal99-alumasteel headhunta-crushed alum or straight brushed alum (I'll check on the crush alum) Jake_Dragon-Graphite (on hold till I hear back from ya. ) Kento-natural pear and or victorian mahogany-cut today LITEDAZE-rosewood (I'll email you some choices) MikeShaffer-brushed pewter or outrageous metalic(cut pewter today-will do some more tomorrow) Monkeyman-dark grey lam and tinted plexi. Rich-alumasteel-hopefully tomorrow. Shop_Rat45-alumasteel-hopefully tomorrow. Synthesis-Alumasteel-again-I will try to cut all the alumasteel tomorrow. Silver86E-tinted plexi-ready to mail. Doublec4-brushed alum dash parts. notafieroanylonger-tinted plexi & alumasteel-plexi is ready-aluma steel tomorow hopefully. Fieropimp-need an address & you need to pm me a choice of color, type etc. (woodgrain-solid color-metallic etc)
If you pm'd me weekend before last, , and your name is not listed, please pm me again. I had so many pm's Saturday morning, that the PM program automatically began deleting the older ones everytime I opened my PM box. You can only keep so many in your inbox at one time.
Calif Kid-yep, we have the jellybean stuff too, but it is a current inventory item & I can't dispose of any of it.
The next thing I am going to be offering is .060" black plastic. The trade name is Kydex. That's a little thick for dash trim, but I feel it will be perfect to make replacements for the splashguards around the lower part of the engine bay. It is shiny on one side, and matte textured on the other. You will not be able to push it up out of the way like you do your oem splashguard tho-it's too stiff. It is about the stiffness of a mudflap you see in the autoparts stores. If you can cut it to fit, and make it removable, i think it will work well. I will also have some 3/16" rubber material for the same purpose, that is a light gray, with some darker spleckling. We call it eco surf, and it is made from recycled rubber. This material is very flexible, durable, and holds up to weather and cold well. It does weigh quite a bit tho, probably 1/2 lb/sq ft, so if you are worried about adding a few lbs to your car, better pass on this. You can see this stuff at Lowes, in the dishwasher displays that look like big doghouses. (we make those displays) . I'll be asking for someone to post some sample pics of these materials. If there's no interest, I'll not bring any home, as my apt is getting a little messy right now. Will also have some 1/16" clear lexan soon, if anyone ha any use for any. Not sure what size it will be tho, as we are just starting a run of this material.
[This message has been edited by maryjane (edited 05-20-2004).]
The next thing I am going to be offering is .060" black plastic. The trade name is Kydex. That's a little thick for dash trim, but I feel it will be perfect to make replacements for the splashguards around the lower part of the engine bay. It is shiny on one side, and matte textured on the other. You will not be able to push it up out of the way like you do your oem splashguard tho-it's too stiff. It is about the stiffness of a mudflap you see in the autoparts stores. If you can cut it to fit, and make it removable, i think it will work well. I will also have some 3/16" rubber material for the same purpose, that is a light gray, with some darker spleckling. We call it eco surf, and it is made from recycled rubber. This material is very flexible, durable, and holds up to weather and cold well. It does weigh quite a bit tho, probably 1/2 lb/sq ft, so if you are worried about adding a few lbs to your car, better pass on this. You can see this stuff at Lowes, in the dishwasher displays that look like big doghouses. (we make those displays) . I'll be asking for someone to post some sample pics of these materials. If there's no interest, I'll not bring any home, as my apt is getting a little messy right now. Will also have some 1/16" clear lexan soon, if anyone ha any use for any. Not sure what size it will be tho, as we are just starting a run of this material.
That Kydex stuff sounds like something I could use. If you still need someone to post pictures, let me know.
IP: Logged
01:55 AM
donk316 Member
Posts: 1952 From: Red Deer, Alberta, Canada Registered: Mar 2003
Hard to say without a better picture. If you have a scanner, scan a pic and email it to me. I don't need to see the whole bezel, just need to see a straight-on closeup, at least 2" X 2" actual size to get a comparison with our stock samples. It looks a little like honey maple, but I don't think it has the dark swirls I see in those pics.
I won't be fillling any new requests until the folowing are filled 1st. (Listed in no particular order) Revin (I'll check on the plexi mirror stock tomorrow. I know we have smoked mirror-not sure about regular mirror. I think it's 3/16) Silver86E-tinted plexi-ready to mail. Songman-tinted plexi-ready to mail.-tan wooddgrain(I'll send some sample pics) swirl-maybe tomorrow. Spiff-alumasteel-hopefully tomorrow. sthtxfiero (need mailing address)-alumasteel-hope to cut tomorrow. Taedir-alumasteel-will cut tomorrow I hope. Earl-dark burl wood or industrial metal (Need a better description of Dark burl wood grain-what exactly is burl?) FastIndy-acyrlic-ready to mail Fieroman87-navaho red and sunflower yellow-cut today goyal99-alumasteel headhunta-crushed alum or straight brushed alum (I'll check on the crush alum) Jake_Dragon-Graphite (on hold till I hear back from ya. ) Kento-natural pear and or victorian mahogany-cut today LITEDAZE-rosewood (I'll email you some choices) MikeShaffer-brushed pewter or outrageous metalic(cut pewter today-will do some more tomorrow) Monkeyman-dark grey lam and tinted plexi. Rich-alumasteel-hopefully tomorrow. Shop_Rat45-alumasteel-hopefully tomorrow. Synthesis-Alumasteel-again-I will try to cut all the alumasteel tomorrow. Silver86E-tinted plexi-ready to mail. Doublec4-brushed alum dash parts. notafieroanylonger-tinted plexi & alumasteel-plexi is ready-aluma steel tomorow hopefully. Fieropimp-need an address & you need to pm me a choice of color, type etc. (woodgrain-solid color-metallic etc)
If you pm'd me weekend before last, , and your name is not listed, please pm me again. I had so many pm's Saturday morning, that the PM program automatically began deleting the older ones everytime I opened my PM box. You can only keep so many in your inbox at one time.
Calif Kid-yep, we have the jellybean stuff too, but it is a current inventory item & I can't dispose of any of it.
Anyone gotten anything yet..?? Just trying tokeep this on top...
IP: Logged
06:43 AM
fieropimp Member
Posts: 422 From: Port Huron, Mi Registered: May 2004
Sorry this is taking so long. My immediate supervisor has gone into convulsions twice in the last 2 weeks, and is now out for the near term, so I've had to take over, till they figure out what's causing it. I'm up to my axx in alligators right now, but will get everything out. Again, my apologies for the delay, but I WILL get it done!!
added to list NSANIT-Blue NIM104-alumasteel or grey carbon-brushed pewter Phil-N-Windsor Mahogany C DuBBz87GT-Dark blue bnmoats-alumasteel bradbitz11-alumasteel (we don't have polished black) datacop-no verdi oxide-choose another?
[This message has been edited by maryjane (edited 06-11-2004).]
IP: Logged
11:08 PM
donk316 Member
Posts: 1952 From: Red Deer, Alberta, Canada Registered: Mar 2003
No hurry. You take care of you job first. This is a nice thing you are doing. We will still be here. You do what you have to do and when you get to it, you get to it, no hurry. I hope your boss is ok and things get back normal for you soon.
IP: Logged
12:19 AM
Racer_JT Member
Posts: 1419 From: Lynchburg, Virginia, USA Registered: Apr 2002
