Pennock's Fiero Forum
  General Fiero Chat - Archive
  4th gen interior

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
4th gen interior by azfieroman
Started on: 05-29-2003 02:20 PM
Replies: 5
Last post by: Oneredfiero on 05-30-2003 02:02 AM
azfieroman
Member
Posts: 136
From: Phoenix, Az
Registered: May 2003

Feedback score: N/A
Leave feedback

Rate this member
Report this Post05-29-2003 02:20 PM Click Here to See the Profile for azfieromanClick Here to visit azfieroman's HomePageSend a Private Message to azfieromanDirect Link to This Post
I see alot of 4th gen camaro or firebird interiors. Not usre which it is, so 2 quetions.
1. is it from a firebird or camaro?
2. how hard is it to install, like what kinds of mods do there need to be?
IP: Logged
PFF
System Bot
87FieroGTx
Member
Posts: 2630
From: Bath, New York, USA
Registered: Jun 2001

Feedback score: N/A
Leave feedback





Total ratings: 53
Rate this member
Report this Post05-29-2003 02:25 PM Click Here to See the Profile for 87FieroGTxClick Here to visit 87FieroGTx's HomePageSend a Private Message to 87FieroGTxDirect Link to This Post
The one everyone is doing is from the Firebird but I'm sure the Camaro one would also work but look worst IMHO.

------------------

What does the future hold for "Fusion"?

400hp @ 9,000rpm N*, 5 speed, .25 CoD, 4.5 0-60, 12.0 1/4, 180+MPH top speed, 25mpg! You never know.

Coming in 2010! :)

IP: Logged
PBJ
Member
Posts: 4167
From: London, On., Canada
Registered: Jan 2001

Feedback score: (1)
Leave feedback





Total ratings: 147
Rate this member
Report this Post05-29-2003 03:25 PM Click Here to See the Profile for PBJSend a Private Message to PBJDirect Link to This Post
The best way to get this info is to do a search using the key word "firebird"

The dash comes from a 1994 or newer firebird.

Pete

------------------

IP: Logged
1986GTV8
Member
Posts: 1259
From: Orlando,FL,USA
Registered: Mar 2002

Feedback score: N/A
Leave feedback

Rate this member
Report this Post05-29-2003 10:57 PM Click Here to See the Profile for 1986GTV8Send a Private Message to 1986GTV8Direct Link to This Post
Look here. https://www.fiero.nl/forum/Forum2/HTML/031255.html

There is another guy who did the swap at the same time that Roy did his. Similar approach, but less cutting.

I am doing Roy's way. Just my prefrence.


John

IP: Logged
jscott1
Member
Posts: 21676
From: Houston, TX , USA
Registered: Dec 2001

Feedback score:    (15)
Leave feedback





Total ratings: 415
Rate this member
Report this Post05-29-2003 11:05 PM Click Here to See the Profile for jscott1Send a Private Message to jscott1Direct Link to This Post
That other guy would be me. Mrfixit58 had an old junk Fiero, affectionately known as the "mule" that he practiced cutting on before installing his interior. I didn't have that luxury so therefore I developed the no cutting firebird dash installation method. You can follow all of it here in this thread:
https://www.fiero.nl/forum/Forum1/HTML/023174.html

Starting in the middle of page one it becomes a firebird swap thread. Good luck

------------------
If you find my advice useful, then please give me a positive rating, thanks...

[This message has been edited by jscott1 (edited 05-29-2003).]

IP: Logged
Oneredfiero
Member
Posts: 999
From: Lethbridge Alberta Canada
Registered: Mar 2002

Feedback score: N/A
Leave feedback

Rate this member
Report this Post05-30-2003 02:02 AM Click Here to See the Profile for OneredfieroClick Here to visit Oneredfiero's HomePageSend a Private Message to OneredfieroDirect Link to This Post
Has anyone thought of a 97 gtp dash/intriour? will it fit?
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock