Does anybody know what are the dimensions of the front and rear wheel bearings on an '85 Fiero? Can't seem to find any info about those. Or maybe at least an OEM part number for those or the inprint on the bearing side itself would be helpful. Thanks in advance for any replies.

[This message has been edited by cebix (edited 06-17-2013).]

Bump

You probably don't have an AUTOZONE down the street. They call the front bearings Timken set 1 and set 4, but give no dimensions.

Rear is TIMKEN 513011K ....entire hub assembly.

[This message has been edited by Gall757 (edited 06-17-2013).]

Yeah I've seen this part but it's not an OEM number and as you say it doesn't list dimensions. I also can't take mine apart to check what's inside since I need this car to be driveable right now. Thanks for the link though.

EDIT: I've also found this but I have no idea if these are the correct dimensions.

http://www.autopartoo.com/oem/gm/7470002gm.html

[This message has been edited by cebix (edited 06-18-2013).]

inner front
ID: 1.0625 x OD: 1.98 x W: 0.56 INCHES
outer
ID 0.6875 x 1.5700 OD x w :0.5450

------------------


87 GT
series 1 3800sc (7.597 @88.53 1.579 60ft)
(series II swap in progress)
85GT Northstar
86GT 3800 n/a

Thanks man, much appreciated.